Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterEnergy-Efficient Upgrade in Pompano Beach, FL
Swapping out older windows for energy-efficient models in Pompano Beach typically reduces cooling costs by 15-30% annually, depending on the age of what’s being replaced and the product installed. Most upgrades are completed in a single day, and the right window – properly spec’d for South Florida’s climate – starts paying back its cost through lower FPL bills almost immediately. At Winslow Windows & Doors, we’ve been handling our Window Replacement services since 2011, and Ed Winslow stands behind every installation personally.
Pompano Beach sits in a climate zone that punishes ordinary windows. The combination of intense UV exposure, salt air off the Atlantic, and humidity levels that rarely let up means a window rated for Chicago or Phoenix simply doesn’t perform here the way the spec sheet suggests. We see it constantly in neighborhoods like Collier City, Cresthaven, and along the barrier island – homeowners who replaced their windows five or ten years ago with builder-grade units are now watching their electric bills climb again, noticing condensation between the panes, and feeling that familiar warm draft near the glass on a July afternoon. Those are signs your windows aren’t doing their job anymore and may need Full Frame Replacement.
Our energy-efficient upgrade service is a sub-service of our broader Window Replacement in Pompano Beach work. If you’re not sure whether a full replacement or a targeted energy upgrade is the right call, we’ll tell you honestly – upfront, before any money changes hands. Call (904) 893-3309 and a real person will answer, day or night.
When You Need an Energy-Efficient Upgrade
- Your FPL bill keeps climbing despite no change in habits. Single-pane or older double-pane windows transfer heat at a rate that puts your AC in a constant losing battle. In Pompano Beach’s summer months, that difference can show up as $80-$150 extra per month on your electric bill.
- You feel warm air or drafts near the glass on hot days. If standing close to a closed window feels noticeably warmer than the middle of the room, the window’s insulating value (measured as U-factor) has likely degraded – or was never adequate for South Florida heat in the first place.
- Condensation is forming between the panes. Moisture trapped between double-pane glass means the inert gas seal (usually argon or krypton) has failed. Once that seal goes, the window loses most of its thermal and UV-blocking performance. This is common in windows installed before 2010 in coastal Broward County.
- Your interior furniture and flooring are fading faster than they should. Standard glass passes significant amounts of UV radiation. Energy-efficient windows with low-E coatings block up to 95% of UV, protecting hardwoods, rugs, and upholstery – a real concern in the sun-heavy east Pompano Beach neighborhoods near the water.
- Your current windows aren’t impact-rated. In Pompano Beach, Broward County’s building code requires impact-resistant glazing or a code-compliant shutter system. If you’re upgrading for energy efficiency anyway, spec’ing impact-rated glass at the same time satisfies both requirements in one project – and avoids paying for two separate permits.
- You’re preparing for a sale or a home insurance review. Insurers increasingly factor window ratings into homeowner premiums in coastal Florida. Energy-efficient, impact-rated windows from brands like PGT or CGI can affect both your coverage options and your premium, and they’re a documented selling point that appraisers in Pompano Beach recognize.
Our Energy-Efficient Upgrade Process
We don’t show up with a truck full of whatever’s in stock and make it work. Every energy-efficient upgrade we do in Pompano Beach starts with a real assessment, because the right product for a second-floor oceanside condo in Lauderdale-by-the-Sea isn’t the same as what belongs in a 1970s ranch home in Cresthaven-whether that’s Insert Window Replacement or another solution. Here’s how the process runs from first call to final inspection.
- In-home assessment and energy audit walk-through. One of our background-checked, uniformed technicians comes to the property and evaluates every window slated for replacement – measuring rough openings, checking frame condition, noting sun exposure by elevation and compass orientation, and flagging anything that might complicate installation (rotted framing, non-standard rough openings, prior permits that weren’t closed). This visit is free, and we don’t charge a trip fee for homes in Broward County.
- Product selection matched to Pompano Beach’s climate requirements. We walk you through the specs that actually matter here: Solar Heat Gain Coefficient (SHGC) below 0.25 for south- and west-facing glass, low U-factor for overall insulation, impact-rated laminated glass to meet Florida Building Code requirements, and corrosion-resistant frames for salt-air exposure. We’re authorized installers for PGT and CGI, both of which manufacture in Florida and engineer specifically for this climate. We’ll show you the ENERGY STAR certification and NFRC ratings on any unit we recommend – not just the marketing sheet.
- Upfront written quote, no surprises. Every project gets a line-item written estimate before any work is scheduled. You’ll see the product cost, labor, permit fees, and any ancillary work (frame repair, flashing, stucco patching) broken out clearly. If our quote is higher than another written estimate you’ve received, we’ll review that estimate with you at no charge. Ed’s name is on this business – vague numbers don’t work for us.
- Permit pulled and inspections coordinated. In Pompano Beach, window replacements generally require a Broward County building permit, especially when changing frame size or switching to impact glazing. We handle the permit application and coordinate all required inspections with the city. You won’t be chasing down inspectors or worrying about an unpermitted installation showing up on a future title search.
- Installation day – protected, clean, and on schedule. Our crews work systematically, protecting floors and interior walls before removing existing units. Old windows and debris are removed from the property the same day. New windows are set, flashed, sealed, and tested for operation before we leave. Most single-family homes in Pompano Beach with four to eight window openings are done in one day.
- Final walk-through and 36500-Day Done Right review. Before the truck leaves, we walk every opening with you – checking seal integrity, operation, drainage weeps, and hardware. If anything doesn’t look exactly right, we address it on the spot. Our 36500-Day Done Right Promise means that if a problem surfaces later that traces back to our workmanship, we come back and make it right. Not a 90-day warranty. Not a two-year limited. A century-long standard of accountability.
Energy-Efficient Upgrade Pricing in Pompano Beach
Energy-efficient window upgrades in Pompano Beach run across a meaningful price range depending on window size, product line, frame material-such as Vinyl Replacement Windows-and whether impact glazing is included. Here are realistic figures based on current Broward County market conditions – not national averages that don’t account for Florida’s impact-code requirements or the labor costs specific to our market.
| Window Type / Scope | Typical Range (Installed) |
|---|---|
| Single double-hung, energy-efficient (non-impact) | $350 – $600 per window |
| Single double-hung, energy-efficient + impact-rated | $550 – $950 per window |
| Sliding or casement window, energy + impact | $650 – $1,200 per window |
| Whole-home upgrade (8-12 windows, single-family) | $6,000 – $14,000 installed |
| Whole-home upgrade (condo/townhome, 4-6 windows) | $3,200 – $7,500 installed |
| Permit and inspection fees (Broward County) | $150 – $400 depending on project scope |
A few things that move the number up or down significantly in Pompano Beach specifically:
- Frame condition. Older aluminum frames common in Pompano Beach’s 1960s-1980s construction stock sometimes have wood framing behind them that has deteriorated from moisture intrusion. Replacing rotted framing adds cost, but skipping it and installing over compromised structure leads to air and water infiltration that defeats the energy upgrade entirely.
- Product tier. A PGT Winguard or CGI Guardian unit costs more than a builder-grade option and performs substantially better over a 20-30 year lifespan in coastal conditions. The SHGC and U-factor difference between a code-minimum window and a well-spec’d one can translate to a 10-15% additional reduction in cooling load.
- Number of openings replaced at once. Per-window costs come down on larger projects. Replacing all windows in a single mobilization also saves on permit fees and minimizes disruption compared to doing it in two or three separate jobs.
- Second or third story installation. Work above the first floor requires additional setup time and, in some cases, scaffolding or boom equipment, which adds to the total.
We offer $40 off any repair or service job over $200, and seniors and veterans receive a permanent 10% discount on all work – not a promotional rate, a standing commitment. Estimates are always free, and we don’t charge a trip fee for homes in Broward County. Call (904) 893-3309 to schedule yours.
If you want to see how energy-efficient upgrades fit into the broader scope of what we do, our home page outlines the full range of services we provide across South Florida.
FAQs – Energy-Efficient Upgrade in Pompano Beach
How much can I actually save on my electric bill with energy-efficient windows in Pompano Beach?
Most Pompano Beach homeowners replacing single-pane or failed double-pane windows with properly rated energy-efficient models see a 15-30% reduction in cooling costs, which typically translates to $60-$180 per month during summer peak billing. The actual number depends on how many windows are replaced, which directions they face, your home’s square footage, and how airtight the installation is. South- and west-facing windows in Pompano Beach absorb the most solar heat, so prioritizing those orientations first gives you the fastest return on investment. Call (904) 893-3309 for a free estimate and we’ll walk through the numbers specific to your home.
Do energy-efficient windows in Pompano Beach have to be impact-rated?
Florida Building Code and Broward County requirements mandate that all new window installations in Pompano Beach meet wind-borne debris protection standards – either through impact-rated glazing or an approved shutter system. In practice, combining energy efficiency and impact rating in a single window (as PGT and CGI units do) is almost always the better financial decision: one permit, one installation, and you eliminate the ongoing hassle of deploying shutters every hurricane season. Non-impact energy-efficient windows are technically available but require a compliant secondary protection system to pass inspection.
How long does an energy-efficient window upgrade take in Pompano Beach?
Most single-family homes in Pompano Beach with six to ten windows are completed in one day of installation. The timeline from signed contract to install day is typically three to six weeks, most of which is product lead time and permit processing through Broward County’s building department. We schedule inspections on your behalf and keep you updated on where the permit stands – you won’t be in the dark waiting for a callback. Call (904) 893-3309 to get a project timeline specific to your address and window count.
What ENERGY STAR ratings should I look for in Pompano Beach’s climate zone?
Pompano Beach falls in ENERGY STAR’s “South” climate zone, which has stricter Solar Heat Gain Coefficient requirements than most of the country – the current ENERGY STAR threshold for this zone is SHGC of 0.25 or lower and a U-factor of 0.40 or lower. Low-E coatings on the interior surface of the outer pane (known as a “hard coat” or “soft coat” low-E) are what achieve those SHGC numbers in practice. Products like the PGT Winguard series and CGI Guardian line are engineered specifically to meet and exceed these numbers in Florida conditions. We’ll show you the NFRC label on every product we recommend – not just a marketing claim.
Key Takeaways
- Energy-efficient window upgrades in Pompano Beach typically cost $550-$950 per window installed when combining energy performance and impact rating – the most practical choice for Broward County code compliance.
- Properly spec’d windows with low SHGC ratings reduce cooling costs by 15-30% annually in South Florida’s climate – a real, measurable return, not a marketing estimate.
- Broward County requires permits for window replacements; Winslow handles the application and coordinates all inspections on your behalf.
- Ed Winslow has run this business since 2011, every technician is background-checked and uniformed, and the 36500-Day Done Right Promise means workmanship accountability that outlasts any warranty card.
- Seniors and veterans receive a permanent 10% discount. No trip charge in Broward County. Estimates are free.
- Call (904) 893-3309 any time – a live person answers around the clock.
Call Winslow Windows & Doors for a Free Energy-Efficient Window Estimate in Pompano Beach
If your windows are working against your AC instead of with it, there’s no reason to keep paying for the gap. Winslow Windows & Doors has been serving Pompano Beach homeowners since 2011 – not as a franchise or a national chain, but as a locally owned operation where Ed Winslow’s name is on every job we touch. We install PGT and CGI products rated for Florida’s toughest conditions, pull every permit, handle every inspection, and back the work with our 36500-Day Done Right Promise. Upfront pricing. No trip charge in Broward County. A 10% permanent discount for seniors and veterans.
Call (904) 893-3309 today. Someone will answer – not a voicemail, not a callback form, a person. We’ll schedule your free in-home estimate and tell you exactly what your Pompano Beach home needs and what it will cost before any work begins. That’s the Winslow way – and it’s been that way since day one.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pompano Beach.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.