Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Pompano Beach, FL
Custom & Geometric Windows - circles, octagons, arches, trapezoids, and eyebrow shapes - are custom-made openings that standard window sizes simply don’t fit. In Pompano Beach, where Mediterranean Revival and coastal contemporary homes frequently feature these signature shapes, getting them right means sourcing the exact frame geometry, specifying impact-rated glazing that meets Miami-Dade and Broward County wind-load requirements, and installing them so they stay watertight through a South Florida storm season. We handle all of that at Winslow Windows & Doors, and we’ve been doing it since 2011.
If you’ve got a round porthole above your entryway that’s fogging up, an arched transom leaking around its frame, or a builder-grade octagon that was never properly sealed, call us at (904) 893-3309 – a real person picks up around the clock, not a voicemail. Our Custom & Geometric Windows in Pompano Beach service covers the full range of specialty shapes, and this page gets specific about the geometric and shaped window work we do most often here in Pompano Beach.
Ed Winslow’s name is on every job we do. That means upfront pricing, no surprise charges on the invoice, and a 36500-Day Done Right Promise that holds us accountable long after the truck leaves your driveway.
When You Need Geometric & Shaped Windows
Shaped windows don’t always fail in obvious ways. Sometimes the sign is a slow drip during a heavy afternoon rain. Sometimes it’s a draft you can feel from across the room. Here are the situations we see most often in Pompano Beach homes:
- Fogging between the panes on a circular or octagonal window. Seal failure in shaped windows is common because the corner welds on non-rectangular frames are under more stress. Once the gas fill escapes and moisture gets in, the glass won’t clear – it needs to be replaced, not cleaned.
- Water intrusion around an arched transom. In the Cypress Hammocks and Collier Manor neighborhoods, we regularly find original 1980s arched transoms where the frame-to-wall flashing was never adequate. A Pompano Beach summer rain will find every gap.
- A shaped window that’s not impact-rated in a home being updated for insurance compliance. Broward County insurers increasingly require all openings to meet current wind-load standards. A decorative round window that was code-legal in 1995 may now be the one gap that keeps your discount from applying.
- Visible frame deterioration or frame separation on specialty shapes. Aluminum frames on shaped windows can pit and oxidize faster than on standard rectangles because the curved or angled extrusions are harder to coat uniformly. Salt air in eastern Pompano Beach accelerates this.
- A new construction or renovation project requiring a custom shape that doesn’t exist in a catalog. If you’re adding a sunroom on the Intracoastal side, or a circular accent window on a gable end, you need a company that can template, order, and install a true custom shape – not a workaround using a standard size.
- An existing shaped window that rattles, lets in road or neighbor noise, or feels loose in its rough opening. Improper original installation is the most common root cause, and it’s fixable without tearing into the surrounding wall if we catch it early.
Our Geometric & Shaped Windows Process
Shaped windows are not a swap-and-go job. The templating step alone determines whether everything downstream goes smoothly. Here’s how we handle it:
- On-site template and measurement. We come to your home in Pompano Beach and physically template the rough opening. For circles and ovals, that means measuring true diameter and checking that the opening is actually round – they often aren’t, especially in older construction. We note the wall depth, exterior cladding type, and any flashing conditions that will affect the install. This visit is free when you’re getting an estimate.
- Product specification and ordering. Using your template dimensions, we specify the right frame profile and glazing package. For Pompano Beach homes, that typically means impact-laminated glass to satisfy Broward County’s building code. Brands like PGT and CGI both offer shaped and custom-geometry impact units; we’ll match the right product to your opening size, wall configuration, and the look you’re going for. Lead times on true custom shapes typically run two to five weeks from order confirmation – we’ll give you a realistic date before you commit.
- Permit coordination. Shaped window replacements in Pompano Beach often require a permit, particularly when the unit is in a load-bearing wall or when the size changes from what’s on record. We handle the permit application and coordinate the city inspection so you don’t have to manage paperwork or scheduling with the building department yourself.
- Removal of the existing unit. We pull the old window carefully, preserving the surrounding stucco or siding where possible. For arched windows set into stucco, this takes patience – rushing it damages the wall and adds to your cost. Our crews are uniformed and background-checked; you’ll know exactly who is on your property before they arrive.
- Installation, flashing, and sealing. The new unit goes in with proper flashing tape, foam backer, and sealant at every joint. For shaped windows, the geometry of the frame means more linear feet of sealant joint per square foot of glass than a standard rectangle – every inch gets attention. We don’t hand this off to a subcontractor.
- Final inspection and walkthrough with you. Before we call the job done, we walk you through what we installed, show you how to operate any operable vents (if applicable), and explain what to watch for in your first storm season. The 36500-Day Done Right Promise covers the installation; if something isn’t right, we come back and make it right.
Geometric & Shaped Windows Pricing in Pompano Beach
Geometric and shaped windows cost more than standard rectangles – that’s honest and it’s because they require custom manufacturing, more complex installation, and in many cases, a permit. Here’s what the Pompano Beach market typically looks like:
| Window Type | Typical Installed Price Range | Notes |
|---|---|---|
| Small circular or porthole (up to 24″ diameter), impact glass | $650 – $1,100 | Fully fixed; no moving parts |
| Octagonal or hexagonal accent window (24″-36″), impact glass | $850 – $1,400 | More corner welds; pricing reflects complexity |
| Arched or half-round transom (up to 48″ wide), impact glass | $900 – $1,600 | Often paired with a rectangular unit below |
| Full-arch or eyebrow window (48″-72″ wide), impact glass | $1,400 – $2,400 | Larger custom extrusion; permit typically required |
| Trapezoid or triangle (gable end applications) | $1,100 – $2,000 | Size and pitch of angle affect cost significantly |
A few things move the number up or down in Pompano Beach specifically:
- Impact vs. non-impact glazing. Most Pompano Beach homes need impact-rated units to satisfy Broward County building code and their insurance carrier. Impact glass adds to the base cost but eliminates the need for shutters over that opening.
- Existing frame condition. If the rough opening needs reframing because of rot or damage – something we see often in older homes near the Intracoastal – that work is quoted separately and transparently before we start.
- Wall depth and exterior finish type. Stucco exteriors require more careful removal and patching than lap-siding homes. We quote this into the estimate upfront so there’s no surprise on the invoice.
- Permit fees. Pompano Beach permit fees vary by project valuation. We include the permit cost in our estimate when one is required – you won’t get a separate bill for that from us after the fact.
Estimates are free. We’ll come out to your Pompano Beach home, template the opening, and give you a written number before you decide anything. Seniors and veterans receive a permanent 10% discount on any job. Call (904) 893-3309 and someone will answer.
Why Pompano Beach Homeowners Choose Winslow
Shaped windows are a niche within a niche. Most window companies in South Florida handle high volumes of standard impact-unit replacements and treat geometric windows as a side order – something to quote high on and hope you don’t ask many questions. We’ve built the opposite reputation.
Since 2011, Ed Winslow has run this company with his name and license on the line for every job. We install products from authorized manufacturers including PGT and CGI, both of whom offer true custom geometry units engineered and tested to Florida’s product approval standards. When a PGT or CGI unit leaves our truck, it arrives with a Florida product approval number you can look up – not a catalog item shoehorned into an opening it doesn’t quite fit.
In neighborhoods like Cypress Creek, Collier Manor, and the streets east of Federal Highway where original 1970s and 1980s construction is still standing, we know what to expect: framing that’s been painted over multiple times, rough openings that are out of square, and stucco that will crack if you’re not careful. That local knowledge isn’t something you get from a national installer who flew a crew down from another state.
The 36500-Day Done Right Promise isn’t a marketing phrase. It’s a straightforward commitment: if the installation isn’t right, we come back and fix it. No runaround, no fine print about what “warranty service” means, no ticket number. Ed’s word.
Key Takeaways
- Geometric and shaped windows in Pompano Beach require custom manufacturing – lead times are two to five weeks for most specialty shapes.
- Impact-rated glazing is the standard here; it satisfies Broward County code and most insurer requirements for wind mitigation.
- Pricing typically runs $650 to $2,400 installed depending on shape, size, and glazing specification.
- Permits are often required and are handled by Winslow – you don’t manage the paperwork.
- Every estimate is free, every job is covered by the 36500-Day Done Right Promise, and every call is answered live around the clock.
- Seniors and veterans receive a permanent 10% discount – no expiration, no conditions.
FAQs – Geometric & Shaped Windows in Pompano Beach
Can geometric windows be impact-rated?
Yes, Custom Impact Windows in geometric shapes are available and are the standard specification for new and replacement installations in Pompano Beach. Manufacturers like PGT and CGI produce custom-geometry impact units that carry Florida product approval numbers, meaning they’ve been tested and certified to meet Broward County wind-load requirements. The shape doesn’t compromise the impact rating as long as the unit is ordered and installed correctly – which is why templating and product specification matter so much on these jobs. Call (904) 893-3309 and we’ll confirm which rated options fit your opening.
How long does a shaped window replacement take in Pompano Beach?
The installation itself, once the window arrives, typically takes half a day to a full day per opening depending on size and wall conditions. The longer part of the timeline is manufacturing: Oversized Openings and other custom geometric units generally run two to five weeks from order to delivery. If a permit is required in Pompano Beach – which it often is for shaped windows in exterior walls – we file that at the time of order so the inspection can be scheduled close to the install date. We’ll give you a realistic schedule before you sign anything.
Do I need a permit to replace a geometric window in Pompano Beach?
In most cases, yes. Pompano Beach building code requires a permit when replacing a window in an exterior wall, particularly when the unit is impact-rated (which triggers product approval verification) or when the opening dimensions change from what’s on record. There are narrow exceptions for like-for-like replacements in certain situations, but we pull the permit whenever one is required rather than cutting corners – it protects you at resale and keeps your insurance valid. We handle the permit application and coordinate the city inspection as part of the job.
What’s the difference between a geometric window and a standard custom-size window?
A standard custom-size window is still a rectangle or square – just built to a non-catalog dimension. A geometric window is any unit with a non-rectangular shape: circles, ovals, Arched & Curved Windows, half-rounds, octagons, hexagons, trapezoids, or triangles. The distinction matters because geometric units require specialized extrusions or bent frames that standard manufacturers don’t keep in stock, which affects both cost and lead time. They also require more care during installation because there’s no four-corner reference point to plumb and level against. If you’re not sure which category your window falls into, describe it to us when you call and we’ll tell you exactly what you’re working with.
Ready to Get Started?
If you have a shaped window in your Pompano Beach home that needs replacing, repairing, or upgrading to impact-rated glazing, call (904) 893-3309 today. Someone answers every call, around the clock – no voicemail, no callback queue. Ed Winslow has been the one down the road since 2011, and a free on-site estimate is the starting point for every job we take on. We’ll template your opening, give you a written price, and let the work speak for itself.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pompano Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.