PGT Windows & Doors Service Nationwide | Winslow Windows & Doors

Why Pompano Beach Homeowners Choose PGT Windows & Doors

We provide PGT repair in Pompano Beach as an independent service provider, handling the full WinGuard, SpectraGuard, and 7700 Series lines across the city’s coastal and inland neighborhoods. What separates our PGT work from a generic contractor’s is simple: we know how these products behave after years of Pompano Beach salt air, sand, and hurricane-grade heat, because we’ve been working on them here since 2011. We’re not authorized by PGT, and we’ll be upfront about that. But our field-level repair record with PGT’s impact glazing across Pompano Beach’s housing stock means we diagnose and fix failures other shops miss or misquote. Call (904) 893-3309 for service.

Call (904) 893-3309

Why Trust Winslow Windows & Doors for Your PGT Windows & Doors?

Ed Winslow grew up in Miami and learned the trade at Miami Dade College’s Building Construction Technology program, where a poorly sealed window was drilled into him as a South Florida liability, not just an eyesore. He’s spent years running installations across Broward County, including nearby PGT repair in Deerfield Beach and Pompano Beach neighborhoods like Cypress Cove, where homeowners take impact ratings seriously and Ed takes them just as seriously. That experience matters when your PGT WinGuard sliding panel has rollers seized with sand or your SpectraGuard double hung won’t stay up because a UV-degraded coil spring finally gave out.

Every technician on our team works on PGT products regularly, not occasionally. We know which WinGuard series uses what interlayer spec, which aftermarket roller assemblies actually hold up in coastal conditions, and which repairs are warranty-safe versus which ones should trigger a full sash replacement. As an independent PGT service provider, we’re not bound to upsell you into products you don’t need. Ed’s name is on the door and on every job we do. My name is on it, so it has to be right.

Common PGT Windows & Doors Problems We Fix in Pompano Beach

Here’s the failure map we see most often in Pompano Beach, based on actual service calls across the city:

• WinGuard laminated glass interlayer haze and delamination. The laminate between the glass panes on WinGuard Aluminum Impact units can start to fog or separate after prolonged salt spray exposure, especially in properties within a few blocks of the Intracoastal or A1A. It’s not a cleaning issue; the interlayer is breaking down. In some cases we can address the frame and hardware while you plan for glazing replacement, but hazed interlayer on impact glass usually means new glass unit, not repair.
• Roller wear and track corrosion on WinGuard sliding panels. Sand intrusion is a constant in Pompano Beach, particularly in beachfront condo towers and homes east of Federal Highway. The sand grinds down nylon rollers and works into the aluminum track, scoring it. Once the roller flattens, the panel drags or jams. Replacing the rollers with marine-grade aftermarket units and cleaning the track often restores one-hand operation without a full sash replacement.
• Sash balance failure on SpectraGuard double hungs. The coil springs in SpectraGuard sash balances degrade under sustained UV exposure and heat, which Pompano Beach delivers year-round. The symptom is a window that won’t stay up despite replacing the tilt latch. The latch was never the problem; the balance system was. We replace the balance assembly with OEM PGT components when available, or a spec-matched aftermarket spring that holds the same tension.
• Weatherstripping deterioration and weep blockage on 7700 Series frames. The 7700 Series uses multi-chamber vinyl frames with weep holes to drain water. In Pompano Beach, salt-laden air accelerates oxidation on the weep-hole covers and breaks down the weatherstripping seals faster than inland Broward communities. When weeps clog and seals shrink, water puddles on the interior sill after heavy rain. We clear the weeps, replace the seals, and check the sill slope to prevent recurrence.
• Label and product approval number wear. The NOA label on PGT impact units can fade or peel off after years of direct sun exposure, particularly on south-facing elevations. This matters for hurricane compliance documentation. If your label is worn off, we can help you document the unit’s specifications and coordinate with the appropriate channels to verify the product approval status for your Pompano Beach property.

PGT Parts & Our Repair-vs-Replace Approach

We replace with OEM PGT components when lead time allows, especially for impact glazing and balance systems where precise specs matter for hurricane protection. But we also carry approved aftermarket rollers, seals, and hardware that often match or exceed original specs, particularly in marine-grade applications where salt corrosion is the real enemy. For Pompano Beach coastal exposure, a quality stainless or marine-grade aftermarket roller can outlast the original nylon unit that PGT shipped from the factory.

Our repair-vs-replace decision is straightforward. If the sash is structurally sound and the failure is isolated to a roller, balance, or seal, we repair it and tell you honestly what the remaining lifespan looks like. If the frame is compromised or a repair would cost more than 60% of a replacement sash, we’ll tell you that too and give you a written line-item quote either way. We’d rather earn your trust on a $300 repair than push a $3,000 replacement you don’t need. Call (904) 893-3309 for an exact quote, estimates are free.

Our PGT Service Process - Step by Step

1. 1
   Diagnosis. We inspect the specific PGT product on your Pompano Beach property, whether it’s a WinGuard sliding panel, a SpectraGuard double hung, or a 7700 Series frame. We identify the failed component and explain what we found in plain English, with photos if you want them.
2. 2
   Repair or install. For repairs, we use OEM PGT parts when available or spec-matched aftermarket components where they perform better in coastal conditions. For installations, we work with PGT’s NOA-approved impact products and follow strict HVHZ installation protocols, including proper bucking and anchoring for Pompano Beach’s masonry block construction.
3. 3
   Test. Before we leave, we operate the window or door multiple times, check the seal lines, verify drainage, and confirm the interlock and balance are right. On impact units, we verify the glazing is secure and the frame anchors are solid.
4. 4
   Warranty. Every repair and installation is covered by our workmanship warranty and the 36500-Day Done Right Promise. If it’s not done right, Winslow makes it right, period. That’s a century-long standard no national chain can match.

PGT Products We Service & Install in Pompano Beach

We service and install the PGT product lines most common in Pompano Beach homes and condos. WinGuard Aluminum Impact Windows: the workhorse line for coastal high-rises and single-family homes needing aluminum frames with heavy-duty impact glazing. WinGuard Vinyl Impact: the choice for inland Pompano Beach neighborhoods like Cresthaven and Collier Manor where homeowners want impact protection with energy-efficient vinyl profiles. SpectraGuard: PGT’s double hung and casement line, common in remodeled ranches and newer construction. 7700 Series: vinyl single hung and sliders, frequently installed in 1950s-1970s CBS ranch homes that replaced their original jalousie or single-pane aluminum sliders.

We stock common rollers, balance assemblies, seals, and hardware for these lines locally, which means faster turnaround on repairs than ordering from out of state.

We Also Service These Brands

While this page is about PGT, we also handle PGT in Fort Lauderdale and install and service seven other authorized brands: CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. If you have mixed-brand windows or doors, we can handle them all on one service call. We’re not tied to a single manufacturer, which means our advice about your PGT products isn’t filtered through a sales quota for PGT products.

FAQs - PGT Windows & Doors Service in Pompano Beach

Is Winslow Windows & Doors authorized by PGT?
No, we are an independent PGT service provider and installer. We are not an authorized PGT dealer or warranty station. That means we have no incentive to recommend a specific PGT product over another, and we make repair decisions based on what actually works for your situation, not what a manufacturer dictates.

Do you use genuine PGT/OEM parts?
Yes, we use OEM PGT components whenever the lead time allows and the part is the best option, especially for impact glazing and balance systems where precise specifications matter for hurricane protection. For rollers, seals, and hardware in severe Pompano Beach coastal exposure, we sometimes recommend approved aftermarket marine-grade components that exceed original specifications. We’ll always tell you which we’re using and why before we start the work.

How long does PGT service take?
Most roller replacements, balance repairs, and weatherstripping jobs are completed in a single visit, typically one to three hours depending on the number of units. Glass replacement for WinGuard laminated units requires ordering from an impact glazing supplier, which typically adds one to three weeks. We’ll give you a realistic timeline in writing before any work begins. Call (904) 893-3309 with your specific situation.

What PGT models/series do you cover?
We service and install WinGuard Aluminum Impact, WinGuard Vinyl Impact, SpectraGuard, and 7700 Series products. That covers the vast majority of PGT windows and doors installed in Pompano Beach homes and condos over the past two decades. If you have an older discontinued PGT line, call us and describe the unit; we’ll tell you honestly whether parts are still available.

Will service void my PGT warranty?
In most cases, no. PGT’s product warranty covers manufacturing defects in materials and workmanship, and independent service does not void that coverage as long as the repair doesn’t modify the original product in a way that compromises its integrity. Using non-OEM parts on a balance system or roller assembly is generally not a warranty issue; what matters is whether the repair itself works. If your unit is still under warranty and the failure is a manufacturing defect, we’ll help you understand whether a warranty claim makes more sense than a paid repair.

How much does PGT windows and doors cost in Pompano Beach?
Repairs are the most common PGT service, not full replacements. In Pompano Beach, a typical PGT roller replacement runs $180-$320 per panel, a sash balance rebuild runs $140-$260 per window, and weatherstripping replacement runs $90-$180 per frame. Full replacement windows or doors range widely: a PGT WinGuard Vinyl single hung installed typically starts around $900-$1,400 per opening, while WinGuard Aluminum impact sliders can run $1,800-$3,500 per unit depending on size and glass spec. These are local Pompano Beach market ranges, not manufacturer list prices, and they account for HVHZ-rated installation in masonry block openings. For an exact quote on your specific units, call (904) 893-3309; estimates are free, and we give written line-item pricing with no change orders after the contract is signed.

Book Your PGT Service in Pompano Beach, FL

If your PGT windows or doors need repair, maintenance, or replacement in Pompano Beach, call (904) 893-3309. A live person answers every call, 24 hours a day, seven days a week. We schedule the diagnosis, give you written upfront pricing, and stand behind every job with the 36500-Day Done Right Promise. The one down the road.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pompano Beach since 2011.