PGT Window Installation Nationwide | Winslow Windows & Doors

PGT Window Installation: The Pompano Beach Owner’s Guide

Replacing a failed PGT window in Pompano Beach typically costs between $900 and $2,800 installed, depending on size, series, and whether it’s an impact-rated unit. We stock PGT-compatible components on our trucks and install them the right way, with the seal, balance, and hardware matched to your existing frame. Most owners discover the problem when a window won’t stay up, won’t lock, or starts letting in warm, salty air that the air conditioning has to fight against.

Call (904) 893-3309

Ed Winslow has been pulling failed windows out of Pompano Beach homes since 2011, and the failure pattern is consistent: the seal goes first, then the balance, then the owner notices water staining or a sudden spike in the electric bill. If you’re hearing a rattle from the sash or seeing daylight around the weatherstripping, don’t wait until hurricane season to deal with it. Call (904) 893-3309 and we’ll walk you through what you’re looking at, free.

Which PGT Models This Applies To

We install and replace parts across PGT’s residential lines, including the WinGuard, SpectraGuard, ClassicVue, and 770/790 series that are common in Pompano Beach’s older coastal neighborhoods and newer developments alike. The critical thing to understand about PGT is that each series uses its own extrusion profile and hardware geometry, so a balance assembly from a ClassicVue unit won’t fit a WinGuard frame, even if the glass dimensions look nearly identical on a tape measure.

The quickest way to identify what you have is to look at the etched manufacturer mark in the corner of the glass. It will list the tempered glass standard, the impact rating if applicable, and a date code that tells us exactly which generation of hardware was spec’d. This matters because PGT has updated its balance systems and locking hardware multiple times in the last fifteen years, and matching the part to the code is what prevents a window that operates fine for three months and then starts binding. Since we’re an independent installer and not a PGT dealer, we source both OEM components and quality aftermarket equivalents that meet or exceed the original tolerance, and we’ll tell you honestly which one makes sense for your situation.

Signs Your PGT Window Installation Is Failing

• Condensation between the glass panes. When the insulated glass seal fails, moisture works its way into the airspace and fogs up. This is a failed glass unit, not something you clean off, and it means the argon or krypton gas fill has leaked out. The window loses its insulating value and won’t ever clear up on its own.
• The sash drops or won’t stay open. PGT balances are coils that counter the weight of the sash. After years of heat and salt exposure, the spring loses tension or the shoe snaps, and the window slams down. You might find yourself propping it with a stick, which is a temporary solution that gets old fast.
• Hard to lock or the handle spins without engaging. The multi-point locking rods inside a PGT sash can corrode or bind, especially in homes within a mile of the Intracoastal. When the handle no longer drives the lock points into the frame, the window isn’t sealed and isn’t secure. For an impact window, that’s a liability you want fixed before the next storm season.
• Visible gaps or daylight around the weatherstripping. PGT’s compression weatherstripping degrades over time under Pompano Beach sun exposure. Once it loses its shape, you’ll feel warm air leaking in and hear wind noise on breezy days. The fix is often straightforward, but ignoring it means running the AC harder than you need to.
• Water staining or softness in the drywall below the window. This one is serious. It means the frame flashing or perimeter seal has failed and moisture is getting into the wall cavity. In Pompano Beach’s humidity, that turns into mold quickly. We treat these as priority calls because the longer it sits, the more the repair bill climbs.

Replacement Cost & What’s Included

Here’s an honest breakdown of what a PGT window installation costs in Pompano Beach right now. The spread depends primarily on whether you have an impact-rated WinGuard unit or a non-impact ClassicVue, and whether the frame itself needs a full tear-out or just a glass replacement and balance rebuild.

• Non-impact PGT single-hung or fixed window, standard size: $900 to $1,500 installed
• Impact-rated PGT WinGuard window, standard size: $1,500 to $2,400 installed
• Glass-only replacement with seal rebuild: $450 to $900 per window
• Balance assembly and hardware replacement: $180 to $360 per window

Every quote includes the part, labor, removal and disposal of the old unit, and a written line-item price before any work begins. There are no change orders once we start unless you ask us to expand the scope. The work is covered by our workmanship warranty, and you can ask Ed himself what happens if something isn’t right. The answer is the same every time: we come back and fix it.

DIY or Call Us?

You can check a few things without touching a screwdriver: look for condensation, run your hand along the frame to feel for drafts, and note whether the sash operates smoothly. That tells us a lot before we even show up. What we’d caution against is pulling a PGT sash apart yourself. The balances are under spring tension, the glass is tempered and heavy, and a misaligned shoe can bind the window or, worse, pinch a finger hard enough to need stitches. We get at least one call a season from a homeowner who watched a video and made it halfway.

The honest math is this: after you buy the right tools, the correct part, and spend a Saturday on it, you might still end up with a window that doesn’t seal right. Call (904) 893-3309 instead. We’ll quote it over the phone, schedule the visit, and have it done right the first time.

Installation Process, Step by Step

We follow a consistent process on every PGT window installation in Pompano Beach so you know exactly what to expect from the moment you call until the final cleanup.

1. 1
   Phone diagnosis. You describe what’s happening, and we help you identify your PGT series using the glass etching and a few measurements.
2. 2
   On-site inspection and quote. A uniformed, background-checked technician arrives, confirms the unit type and sizing, and writes a line-item quote. No trip charge anywhere in our home county.
3. 3
   Glass and hardware ordering. We either pull from our truck stock or order the exact unit matched to your PGT date code and size.
4. 4
   Installation day. We protect the interior, remove the old unit, rebuild or replace the frame as needed, set the new window, and seal the perimeter against South Florida weather.
5. 5
   Cleanup and walkthrough. We clean the glass, vacuum the work area, and walk you through what was done and what to look for going forward.

Do You Work on Homes Built by Pompano Beach’s Specific Builders?

Yes. We’ve installed and replaced PGT windows in every neighborhood in Pompano Beach, from Harbor Village to Cypress Point to the Garden Isles. The builder matters less than the window itself, but we’re familiar with the housing stock here. Homes built after 2002 when the Florida Building Code tightened are generally using impact-rated PGT units, while older homes might have original aluminum-frame PGT windows that are now twenty-plus years old. Those older frames are where we see the most balance failures and seal degradation, and we know how to work with the existing openings without tearing apart your stucco unless it’s genuinely necessary.

Is It Necessary to Replace the Whole Window or Can You Just Repair the Glass?

If the glass is fogged or cracked, we can replace the insulated glass unit without pulling the entire frame, and that’s usually the cheaper path. If the balance or locking hardware is what failed, we can rebuild those components in place. The only time you’re looking at a full window replacement is when the frame itself is warped, rotted, or so corroded that the new glass can’t be seated cleanly. We’ll tell you which situation you have before any money changes hands.

How Long Does the Swap Take?

A standard-sized PGT window replacement in Pompano Beach takes about two to three hours once we’re on site. Glass-only swaps run faster, typically under ninety minutes per unit. Full tear-outs of older aluminum-frame windows run longer, sometimes a half-day, because of the stucco work involved. We’ll give you a firm time window when we schedule, and if anything changes, we call you before you have to call us.

Do You Keep PGT Parts in Stock?

We keep the most commonly needed PGT components on our trucks: balance assemblies, locking rods, hinge sets, and weatherstripping for WinGuard and ClassicVue series. If your unit needs an unusual glass size or a specific-generation balance, we order it and typically have it in hand within three to five business days. Each of our eight installations uses only genuine PGT OEM or factory-equivalent components, and we never substitute a competitor’s hardware in a PGT frame.

FAQs

How long do PGT windows last in Pompano Beach? A properly installed PGT window in Pompano Beach can last 20 to 30 years, but the hardware typically needs attention at the 10 to 15 year mark due to salt air and humidity, especially within a few miles of the ocean. Call (904) 893-3309 if you’re seeing early signs like sagging sashes or stubborn locks.

Can a PGT window be repaired instead of replaced? Yes, if the failure is limited to the glass unit, balance system, or hardware, we can rebuild or replace those parts without changing the frame. The full frame replacement is reserved for cases where the structure itself has deteriorated beyond a reliable seal.

How long does it take to get a replacement PGT window installed? Standard-size glass or hardware swaps can be done the same week. Custom-sized impact units usually take three to five business days for the order and two to three hours on installation day.

Do you stock PGT parts or have to special-order everything? We stock the fast-moving PGT components on our trucks: balances, locks, hinges, and weatherstripping. Unusual glass sizes or older-generation parts are ordered and typically arrive within three to five business days. Call (904) 893-3309 and we’ll confirm what we have before scheduling your visit.

Will the price change once work starts? No. The price on your written quote is the price you pay unless you ask us to do additional work. We don’t do change orders on our own, and we don’t find “surprises” mid-job. Ed Winslow’s name is on the business. My name is on it, so it has to be right.

If your PGT window is fogged, cracked, or refusing to stay up, call Winslow Windows & Doors at (904) 893-3309. We answer live, 24 hours a day, and we’ll give you a straight answer and a free estimate. We’re the one down the road.

Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.