Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterCGI Energy-Efficient Windows in Pompano Beach: What to Know First
CGI energy-efficient windows in Pompano Beach typically cost between $850 and $2,400 per window installed, depending on the series, glass package, and whether the opening needs new framing. Most CGI window replacements take one to two days from tear-out to final caulk, and we quote every job with a written line-item estimate before any work begins. If you own a CGI window that’s fogged, leaking air, or losing its Low-E coating, call (904) 893-3309 and Ed Winslow will talk you through what’s actually wrong before you spend a dime.
This page is for Pompano Beach homeowners who bought CGI windows because of the impact rating and the energy numbers, and now need someone who knows the product deeply enough to keep both promises intact. We’re an independent CGI service provider, not a manufacturer dealer, which means we fix what’s broken without pushing a full-house replacement when a targeted repair makes more sense.
How CGI Products Fail - and How We Fix Them
CGI builds a genuinely tough window, but Pompano Beach has a way of finding the weak points in anything that faces the Atlantic. Here’s what we actually see on service calls in this city:
- Fogged insulated glass on CGI Estate Collection units. The Estate line uses a dual-seal insulated glass unit, and after enough years of salt air and UV, the outer seal lets go. Moisture gets in, the argon escapes, and the glass clouds up. We replace the IGU with a new Low-E, argon-filled unit that matches the original solar heat gain coefficient, so the window’s energy performance comes back without replacing the entire frame.
- Air infiltration around the sash on older CGI Sentry series frames. The Sentry’s weatherstripping is durable, but Pompano Beach’s humidity and heat cycles compress it over time. You’ll feel a draft near the lock rail or see daylight through the corner. We re-gasket with a dense closed-cell weatherstrip and realign the sash, which restores the original seal without touching the glass.
- Failed Low-E coating on south-facing windows. CGI’s Low-E (often a sputtered soft-coat on their laminated glass) can develop a hazy, blotchy look after years of direct South Florida sun, especially in Pompano Beach homes on the Intracoastal with reflected UV off the water. This isn’t condensation, it’s coating degradation, and the only honest fix is a new IGU. We spec the replacement glass to match the original U-factor and SHGC so the room doesn’t heat up differently afterward.
- Stiff or sagging operation on CGI Targa series horizontal sliders. The Targa’s rollers are specified well, but coastal grit works into the track, the rollers flatten, and the panel drags. Left alone, it gets worse and the locking mechanism starts to bind. We clean and flush the track, replace the rollers with an OEM-equivalent set, and adjust the reveal so the panel glides and locks properly again.
- Condensation between panes on insulated laminated glass. CGI’s laminated impact glass adds an interlayer, and when the IGU seal fails, the condensation can sit between the laminate and the outer pane, which looks different from standard fogging and confuses a lot of owners. We tell customers to look for a subtle oil-slick pattern. That’s the interlayer separating from the glass, and it means the unit has been compromised and needs replacement, not a defogging drill-and-fill job.
Our CGI Energy-Efficient Windows Process
Here’s how a CGI window job goes when you call Winslow Windows & Doors:
- 1
You call (904) 893-3309 and a person answers. Not a phone tree. We ask what you’re seeing, and Ed will often talk through basic diagnostics on the first call to decide if a service visit is even necessary.
- 2
We schedule the site visit and show up on time. Our tech arrives in uniform, background-checked, and identifies the window or frame issue in person. We measure, inspect the seal condition, and check the surrounding flashing and caulk.
- 3
We give you options in plain English. When OEM parts make sense, we use them. When a quality aftermarket component performs as well or better for half the cost, we tell you that too and explain the trade-off before you decide. No surprises on the invoice later.
- 4
We do the work with the right glass package. We order or install Low-E, argon-filled, or tinted glass matched to your existing CGI frame and your home’s exposure. Solar heat gain and U-factor get matched, not guessed.
- 5
We test the window before we leave. We check the seal with a smoke pen or moisture meter, cycle the sash or panel until it operates correctly, and recaulk the exterior with a UV-stable sealant that holds up to Pompano Beach sun.
- 6
You get the 36500-Day Done Right Promise. If it’s not right, we come back and make it right. That’s the whole warranty. It doesn’t expire in a year or five years. It doesn’t expire in a hundred.
What CGI Energy-Efficient Windows Costs in Pompano Beach
| Scenario | Typical Cost Range |
|---|---|
| IGU replacement, single CGI window (fogged glass, Low-E laminate) | $450 - $900 |
| Full CGI window replacement, standard size, Low-E/argon | $850 - $1,800 |
| Full CGI window replacement, large or custom size | $1,500 - $2,400 |
| Weatherstripping and sash realignment, per window | $85 - $160 |
| Window energy audit (whole-home, with ratings report) | $150 - $350 |
What moves the price: glass package (tinted or laminated Low-E costs more), frame condition, whether the existing opening needs R&R (remove and reset) work, and access. A second-story Cypress Cove window on a ladder costs more than a ground-level slider. Every estimate is free and written before any work starts. Call (904) 893-3309 for an exact number on your specific windows.
Why Pompano Beach Homeowners Call Winslow Windows & Doors for CGI Work
Ed Winslow’s name is on the door, and on every job we do. That’s not a slogan. We’ve been serving Pompano Beach since 2011, and we answer the phone 24 hours a day with a live person who knows windows, not a call center reading a script. Our techs are background-checked and uniformed, so you know who’s at your door before the truck pulls up. And if the scope ever goes beyond CGI, we’re authorized installers for PGT, CWS, ES Windows, and ECO Window Systems too, so you’re never forced into a single-brand solution. Upfront pricing, no trip charge inside our home county, and a permanent 10% discount for seniors and veterans. The one down the road.
FAQs
No, a proper IGU replacement or weatherstripping repair performed by an independent service provider does not void the CGI frame warranty, as long as the work isn’t a structural modification to the frame itself. We keep the repair within the original design specs, which is the warranty-safe way to do it. Call (904) 893-3309 if you want us to check your specific window’s warranty terms before we quote.
In most cases on CGI frames, we can replace the insulated glass unit (IGU) and keep your existing frame, which saves you hundreds of dollars per window. The frame gets replaced only when it’s rotted, bent, or no longer square. We’ll show you which applies to your window before you decide.
Most glass replacements are done within a week of the site visit, since we order the IGU to match your exact specs and it typically arrives in three to five business days. Crash repairs on one or two windows we often complete same-day if it’s a weatherstripping or hardware issue, not a glass order. Call us for a straight answer on your specific situation.
Yes, we match U-factor and solar heat gain coefficient to your original glass package, or we’ll recommend an upgrade if you want better performance and explain what changes on your cooling bill. You get the numbers on paper before the glass gets ordered.
Yes, every estimate is free and written line by line, with no trip charge inside our home county. You’ll know the exact cost before we touch a window, and the number on the estimate is the number on the invoice. Call (904) 893-3309 to schedule yours.
Contact Winslow Windows & Doors for CGI Energy-Efficient Windows in Pompano Beach
If your CGI windows are fogged, drafty, or losing their coating, call (904) 893-3309 today. We’ll talk it through, schedule a visit, and give you a written estimate that holds. My name is on it, so it has to be right.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.