CWS Roof Replacement & Installation Nationwide | Winslow Windows & Doors

CWS Roof Replacement & Installation in Pompano Beach: What to Know First

CWS roof replacement and installation in Pompano Beach typically runs between $12,000 and $28,000 depending on your roofline, material choice, and whether we’re tearing off one layer or two. Most full replacements take four to seven working days from tear-off to final inspection. We’re an independent CWS service provider, which means we install their products but we don’t answer to their corporate office - we answer to you and to Ed’s name on the truck.

Call (904) 893-3309

This page is for Pompano Beach homeowners who already have CWS roofing on their house, or who are considering CWS for a full replacement, and want straight answers about what fails, what it costs, and how long it actually takes. Call (904) 893-3309 and a live person picks up. Not a voicemail. Not a call center. A person who knows roof work.

How CWS Products Fail - and How We Fix Them

• CWS barrel tile hairline cracking at the ridge. We see this regularly on Pompano Beach homes within three miles of the Intracoastal. Salt air works into the tile glaze, then afternoon heat expands the clay faster than the salt-weakened surface can handle. The tile doesn’t collapse, it starts shedding small crescent-shaped flakes. We replace the affected tiles and re-bed the ridge with a polymer-modified mortar that flexes instead of fighting the thermal cycle.
• CWS flat tile underlayment delamination on low-slope sections. CWS concrete tile holds up, but the original underlayment on homes built before roughly 2015 often wasn’t rated for Pompano Beach’s standing-water afternoons in August. Once the underlayment separates, water channels under the tile and you won’t see a stain until it’s in the sheathing. We remove the tile, replace the underlayment with a self-adhered high-temp membrane, and re-lay the original tile when it’s still sound.
• CWS metal panel oil-canning on south-facing roofs. CWS standing seam panels are well made, but the gauge they use on their mid-tier line can show visible oil-canning (that wavy, stressed look) after a few years of direct Broward County sun. It’s cosmetic, not structural, but it drives homeowners nuts. We add rigid foam underlayment on replacements to absorb thermal expansion and eliminate the wave before the panels go down.
• Flashing failures around CWS skylight curbs. This is less a CWS product defect and more a builder shortcut we keep finding. The original installer sealed the curb with butyl tape instead of a proper stepped metal flashing, and in Pompano Beach’s rainy season, that tape eventually lets go. We pull the skylight, install proper CWS-compatible flashing, and test with water before we call the job done.
• CWS terracotta tile spalling near the hips. On older CWS terracotta installs, the hip tiles take the worst of wind-driven rain and debris. Over a decade or two, the surface begins spalling, leaving a rough, chalky finish that holds moisture. We replace hip tiles with matched CWS profile pieces and seal the transition so water sheds cleanly into the valleys instead of lingering on the porous surface.

Our CWS Roof Replacement & Installation Process

1. 1
   We walk the roof with you. Before quoting anything, we get on the roof, take photos, and show you what we’re seeing. You’ll know the difference between a tile that’s fine and one that’s failing before we ever hand you a number.
2. 2
   We write the estimate in plain English. Line items, materials listed by name, tear-off and disposal separated from installation. You won’t see “miscellaneous” or a vague allowance anywhere on the page.
3. 3
   We make the parts decision together. If your CWS tile or panels are still made, we order OEM. If they’re discontinued, we find a profile-matched aftermarket piece that our suppliers stand behind. You’ll know which is which and why before we spend a dollar.
4. 4
   We pull permits and schedule the tear-off. Broward County inspections are part of the job. We handle the permit paperwork and coordinate the inspection timing so you’re not left waiting on a county inspector with a half-finished roof.
5. 5
   We install, we test, we clean up. Every CWS roof we install gets tested for water intrusion before the final inspection. Nails are swept with a magnet, not just a broom. Your driveway looks like we were never there, except for the new roof.
6. 6
   The guarantee kicks in. If anything about the installation isn’t done right, we come back and fix it. That’s the 36500-Day Done Right Promise. Ed’s name is on it.

What CWS Roof Replacement & Installation Costs in Pompano Beach

Here’s what we’re actually quoting in Pompano Beach right now. These are installed prices including materials, labor, tear-off of one layer, and disposal.

• CWS concrete tile full replacement: $14,000-$24,000 on a typical 2,000-2,500 square foot single-story home.
• CWS terracotta tile full replacement: $18,000-$28,000, with the premium coming from material cost and the extra care terracotta needs during installation.
• CWS standing seam metal: $16,000-$26,000 depending on roof complexity and whether you want rigid foam underlayment.
• Partial replacement or reroof over existing deck: $6,000-$12,000 when the decking is sound and we’re working around existing structure.

A roof with more hips, valleys, skylights, or a steep pitch runs higher. A simple gable with easy access runs lower. The number you get from us is the number you pay, there are no change orders on work we’ve already scoped. Call (904) 893-3309 and we’ll set up a time to walk your roof and give you a number that means something.

Why Pompano Beach Homeowners Call Winslow Windows & Doors for CWS Work

We’ve been at this since 2011, which in Florida roofing years is about three full hurricane seasons longer than half the companies you’ll find online. Ed Winslow grew up in Miami and learned building construction at Miami Dade College, where the first lesson was that South Florida weather punishes sloppy work faster than anywhere else in the country. He’s run jobs through Pompano Beach neighborhoods like Cypress Cove, where homeowners take their impact ratings personally and expect the same from their roofer.

We don’t just work on CWS. We install PGT, CGI, ES Windows, and ECO Window Systems products too, which means when your roof replacement turns up window flashing issues or a door that’s no longer sealing, we can address it without bringing in another company. One crew, one owner, one phone number. And when you call that number at any hour, a live person answers. Ed’s name is on the truck and on every job we do. It has to be right.

FAQs