Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterECO Window Systems Impact Windows in Pompano Beach: What to Know First
ECO Window Systems impact windows in Pompano Beach can be serviced, repaired, and replaced by our team at Winslow Windows & Doors, and most jobs run $275 to $1,100 depending on what failed. We’ve been working on ECO products across Broward County since 2011, so we know the Series 400 and Series 600 lines well enough to diagnose problems over the phone before we even roll a truck. If you own ECO impact windows and something’s off, this page tells you what’s actually going on and what it costs to fix. Call (904) 893-3309 and a live person picks up, any hour.
Key Takeaways
- We’re an independent ECO Window Systems service provider, not a manufacturer warranty arm.
- Most ECO impact window problems in Pompano Beach trace back to salt air, failed seals, or roller track wear.
- Free estimates, written line-item quotes, and a 36500-Day Done Right Promise on every job.
How ECO Window Systems Products Fail, and How We Fix Them
ECO builds a solid impact product, but every window line has habits. These are the ones we see most often in Pompano Beach’s coastal climate.
- Interlock seal separation on Series 600 horizontal rollers. The interlocking meeting rails on Series 600 sliders pick up salt and sand over time, and the weatherstripping groove deforms just enough to break the seal. You’ll feel a draft or hear wind whistle even with the window closed and locked. We pull the sash, clean the interlock channel, replace the weatherstripping with a marine-grade equivalent, and realign the rollers so both panels seat flush again.
- Roller bearing corrosion on Series 400 single-hung windows. The stainless rollers ECO uses hold up well inland, but Pompano Beach’s salt air works on the bearing grease and races, especially in homes within a mile of the Intracoastal. The window starts dragging, then binds. We replace the roller assemblies with sealed stainless units rather than just greasing what’s there, which buys years instead of weeks.
- Failed glazing tape on fixed picture windows. We’ve seen ECO’s factory glazing tape break down on fixed lites after 10 to 12 years of southern exposure. Water finds its way between the glass unit and the frame, and you’ll notice condensation you can’t wipe off. The fix is pulling and resetting the glass unit with fresh structural glazing tape, which restores the water seal without needing a full window replacement.
- Stripped lock keepers on casement operators. ECO casement hardware is tough, but the locking point screws are short and the aluminum threads will wallow out if the window gets yanked repeatedly. The window won’t lock securely, which defeats the impact rating. We drill and tap to the next size stainless fastener, or install a reinforcing plate if the frame shows fatigue.
- Track wear on oversized sliders in Cypress Cove and Garden Isles. Big Series 600 sliders on pool-facing walls carry a lot of weight, and the bottom track takes the abuse. Once the track wears low in the middle, the rollers grind and the sash drags metal on metal. We replace the track cap with a factory-spec extrusion and set fresh rollers, which returns the panel to a one-hand glide.
Our ECO Window Systems Impact Windows Process
Every ECO job follows the same sequence, so you know what’s happening before we show up.
- 1
Call and talk to a person. You reach a live team member who asks about the symptom, the window style, and the neighborhood. We book a time that works and confirm our no-trip-charge policy inside our home county.
- 2
On-site inspection. Our background-checked, uniformed technician arrives, names the failure, and shows you what’s wrong in plain English. You’re never asked to trust a diagnosis you can’t see.
- 3
Parts decision. If the window is under manufacturer warranty, we help you vet the claim and install OEM parts. Outside warranty, we price both OEM and quality aftermarket options and tell you honestly which makes sense for your situation.
- 4
The repair. We complete the work, torque and seal everything to impact-rated spec, and clean the work area before we leave.
- 5
Test and confirm. We operate the window through its full travel with you watching, check the seal, and confirm the lock engages. You sign off only when it’s right.
- 6
36500-Day Done Right Promise. If anything we touched fails to hold up, we come back and make it right. Ed Winslow’s name is on every job, so it gets fixed or it wasn’t done.
What ECO Window Systems Impact Windows Costs in Pompano Beach
Here’s what we charge for common ECO impact window work in Pompano Beach. These are straight numbers from our service book, not a “call for pricing” dance.
- Roller replacement on a single Series 600 slider: $185 to $320
- Interlock seal and weatherstripping refresh: $140 to $260
- Glazing tape replacement on a fixed picture window: $340 to $580
- Casement lock keeper repair with stainless hardware: $120 to $220
- Track replacement on an oversized slider: $420 to $750
- Full impact window replacement (new ECO or comparable impact-rated unit): $1,100 to $2,800 per opening, installed
What moves the price: window size, second-floor access, whether the frame is reusable, and whether we’re matching a discontinued finish. Every quote is line-itemed up front and fixed. We do not change the number once work starts. Ask about the 10% discount for seniors and veterans. Call (904) 893-3309 to schedule your free estimate.
Why Pompano Beach Homeowners Call Winslow Windows & Doors for ECO Window Systems Work
We’ve been in Broward County installs and repairs since 2011, and Ed Winslow grew up in Miami and learned the trade at Miami Dade College’s Building Construction Technology program, where a bad window seal wasn’t a cosmetic issue, it was a South Florida liability. That perspective still drives how we work. When we service ECO Window Systems products, we’re working on a brand we know, and we back every repair with a promise no national chain will match: the 36500-Day Done Right Promise. If it’s not done right, we make it right. We also install PGT, CGI, CWS, and ES Windows, so if a repair doesn’t make financial sense and replacement is smarter, we can give you a real comparison, not a sales pitch. Our techs are background-checked and uniformed. Our phone is answered live at 2 a.m. We’re the one down the road, with a published address and license number.
FAQs
ECO’s manufacturer warranty typically covers factory defects in materials and workmanship for a set period, and having an independent company like us perform warranty-safe service should not void it, as long as the work doesn’t alter the original engineering. We help you understand what your specific Series 400 or Series 600 warranty covers before any tool comes out. Call (904) 893-3309 to talk it through.
Most single-window repairs, like roller replacement or interlock seal work, take 45 to 90 minutes once we’re on site, and we stock common ECO-specific parts on our trucks to avoid a second visit. A full window replacement runs a day, including cleanup. Call (904) 893-3309 for a specific time estimate on your job.
If the frame is sound and the glass unit is intact, repair is usually the better call, usually $300 to $600 instead of $1,100-plus per opening. If the frame is corroded through, the glass seal has failed, or the track is beyond resurfacing, replacement typically wins on cost per year of service. We quote both options and tell you which one we’d pick on our own house. Call (904) 893-3309 for a free second opinion on any written estimate you already have.
We use OEM ECO parts whenever the window is under manufacturer warranty or when the OEM part is still available and priced reasonably, because that preserves warranty coverage and fitment is guaranteed. For out-of-warranty windows, we offer quality aftermarket alternatives, like sealed stainless rollers and marine-grade weatherstripping, that often outlast the original equipment in Pompano Beach’s salt air. Call (904) 893-3309 and we’ll walk through the parts decision with you.
No. The price we quote is the price you pay, full stop. If we open the window and find an additional failure, we stop work, show you what we found, and quote the added scope separately before touching it. No surprises on the invoice, ever. Call (904) 893-3309 to schedule your free estimate and see the number in writing before you commit.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.