Mr-Glass Impact Windows Nationwide | Winslow Windows & Doors

Mr-Glass Impact Windows in Pompano Beach: What to Know First

Independent Mr-Glass impact window service in Pompano Beach usually runs two to five business days from diagnosis to completed repair, and most jobs fall between $180 and $950 depending on the failure. We’re not a Mr-Glass factory dealer, but we know these windows the way a mechanic knows a specific engine: by the sounds they make, the ways they fail, and what it takes to fix them right.

Call (904) 893-3309

This page is for Pompano Beach homeowners who already own Mr-Glass impact windows or are considering them and want the straight story on what actually holds up in a coastal climate. If a window is leaking, binding, or losing its seal, call (904) 893-3309 and talk to a live person. Ed Winslow’s name is on the business, and he’s the one who picks up.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass builds a solid impact window, but no window survives South Florida without maintenance. Here’s what we actually see on service calls in Pompano Beach:

• Seal failure on the Mr-Glass 7000 Series single-hung. The insulated glass unit loses its argon fill after years of salt air and UV exposure along the coast. You’ll see fogging between the panes that comes and goes with humidity. We replace the IGU with a unit matched to the original frame spec, so the impact rating stays intact.
• Roller wear on Mr-Glass horizontal sliders. The factory rollers are fine for the first decade, but Pompano Beach sand gets into the bottom track and grinds them down. The window gets harder to slide, then sticks. We disassemble the sash, clean the track, and install upgraded stainless rollers that hold up better than OEM in a beach environment.
• Weep hole blockage causing interior leaks. Mr-Glass frames drain through weep channels that clog with salt crust and debris. Water backs up and runs inside during heavy summer storms. The fix is a thorough weep system cleaning and, where needed, opening additional drainage points. It’s a two-dollar fix most homeowners never find because they never look.
• Locking mechanism failure on Mr-Glass casement windows. The multi-point lock hardware on older Mr-Glass casements wears unevenly, especially the shoot bolts on the hinge side. We replace the hardware with OEM Mr-Glass parts when available, and quality aftermarket equivalents when the factory is backordered. We tell you which one we’re using and why, before we install it.
• Frame stress cracks on Mr-Glass 5000 Series fixed windows. In homes where the original installers didn’t square the rough opening, the frame flexes with every pressure change. You’ll see hairline cracks at the corners over time. We assess whether the frame can be reinforced or needs replacement, and we tell you straight if a patch job would be throwing good money after bad.

Our Mr-Glass Impact Windows Process

Here’s how a Mr-Glass service call works with us, start to finish:

1. 1
   You call, a person answers. No voicemail, no call center. Ed or a member of the crew picks up, 24/7.
2. 2
   We schedule the diagnostic visit. No trip charge inside the home county. We’ll tell you the window, the time, and who’s coming, with a name and a uniform description.
3. 3
   We inspect the window and the surrounding opening. A Mr-Glass window doesn’t fail in isolation. We check the frame, the flashing, the sealant, and the balance system before touching anything.
4. 4
   We give you a written line-item quote. OEM vs aftermarket parts, labor, and what’s actually wrong. No vague “repair and materials” line. You see every dollar before we start.
5. 5
   We do the work and clean up. The window is re-installed, adjusted, and tested for operation and water resistance. The work area is left cleaner than we found it.
6. 6
   We stand behind it. If it’s not done right, we make it right. That’s the 36500-Day Done Right Promise, and it applies to every Mr-Glass window we touch.

What Mr-Glass Impact Windows Costs in Pompano Beach

Here are the ranges we quote most often for Mr-Glass work in Pompano Beach:

• IGU replacement (fogged glass) in Mr-Glass 7000 Series: $240-$480 per sash
• Roller replacement on Mr-Glass slider: $180-$320 per panel
• Multi-point lock replacement on Mr-Glass casement: $220-$410 per window
• Weep system cleaning and re-seal: $140-$260 per window
• Full Mr-Glass impact window replacement (standard size): $850-$1,900 installed, depending on frame type and size

What moves the price: whether the sash needs disassembly, whether OEM parts are available, access (second story costs more), and whether the original opening was installed square. We’ll tell you before we start. Call (904) 893-3309 for a free written estimate.

Why Pompano Beach Homeowners Call Winslow Windows & Doors for Mr-Glass Work

We’ve been serving South Florida since 2011, and Ed Winslow grew up in Miami and learned the trade through Miami Dade College’s Building Construction Technology program. He’s run window jobs across Broward County, including plenty in Pompano Beach neighborhoods like Cypress Cove, where homeowners take their impact ratings seriously and Ed takes them just as seriously.

We’re one of the only locally owned shops that works on Mr-Glass windows and also installs PGT, CGI, CWS, and ES Windows. That matters because when a Mr-Glass frame can’t be salvaged, we can show you alternatives from other impact-rated brands and help you decide what’s actually worth the money. We don’t push what we don’t believe in.

Every technician is background-checked and uniformed. The phone rings to a live person at 2 a.m. The price on the written estimate is the price on the invoice. And the 36500-Day Done Right Promise means we’re accountable for a century, which is longer than most window companies have existed.

FAQs