Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterMr-Glass Window Installation: The Pompano Beach Owner’s Guide
Mr-Glass window installation in Pompano Beach typically runs $85 to $210 per window for the installation labor, depending on whether we’re replacing a failed part, re-seating the sash, or doing a full frame-level reinstall. We stock Mr-Glass-compatible hardware on our trucks, and most jobs in Pompano Beach are done in a single visit. Most homeowners find this page because rolling their Mr-Glass window open takes real muscle, or because a corner of the glass has started fogging between the panes, or because the sash that used to glide now scrapes against the frame like sandpaper.
That friction and fogging is almost never the frame itself. It’s the installation at the seam, the balance, the weatherstripping. The connections that were perfect the day the window went in and have spent years fighting Pompano Beach sun, salt air, and afternoon downpours. Mr-Glass windows are built for South Florida, but the hardware around them wears like any other moving part.
Which Mr-Glass Models This Applies To
We work on the full Mr-Glass residential lineup commonly installed across Broward County, from single-hung and horizontal sliders to fixed picture windows and casement units. The parts that fail are rarely model-specific, which is good news: balances, sash guides, tilt latches, and compression seals cross over between Mr-Glass series more often than most owners expect.
Here’s the gotcha we see in Pompano Beach repeatedly: a homeowner reads “PGT” or “CGI” off a sticker on the glass and assumes every part in the window came from that brand. Mr-Glass uses its own extrusion profiles and balance systems on many of its impact-rated lines. Buy a balance off a generic shelf and you’ll get a window that binds after four months. OEM Mr-Glass parts are machined to the exact tolerances of their frame channels. Quality aftermarket equivalents exist, and we’ll tell you honestly when one is fine and when it isn’t. If we’re replacing a balance shoe or a sash spring, OEM is the answer. If we’re replacing a friction pad or a foam gasket, a measured aftermarket part performs identically for less. We know which is which because we measure every part before we order or install it.
To identify your Mr-Glass model, look for the etched or printed logo in the corner of the glass, usually lower-right on the sash. The series number, when present, is on a silver or white sticker on the frame’s top channel. If that sticker is sun-bleached into oblivion, which happens fast in Pompano Beach, we identify the hardware by measuring the channel width, balance shoe depth, and sash weight.
Signs Your Mr-Glass Window Installation Is Failing
- Sash drags or catches mid-slide. The balance tension is off, the shoe is cracked, or the track is so loaded with salt grime the roller system can’t compensate. Continuing to force it bends the sash corners.
- Window won’t stay up without propping. Classic worn balance. The spring or block-and-tackle mechanism inside the jamb has lost tension. This is the number-one Mr-Glass repair we perform in Pompano Beach, especially on windows that face east and cook in the morning sun.
- Air whistles around the sash even when locked. Compression weatherstripping at the meeting rail or side jambs has flattened. In Pompano Beach, salt and humidity accelerate the breakdown of the foam core inside these seals. Your air conditioner is now paying for it.
- Fog between the glass panes. The glazing seal on the insulated glass unit has failed. Mr-Glass’s IGU seals are built well, but after ten-plus years in South Florida humidity, moisture intrusion at the spacer bar is common. The glass itself may be fine; the unit needs replacing.
- Tilt latches won’t engage or won’t release. The latch springs are corroded or the pivot pins have worn round. That’s common in Cypress Cove and other Pompano Beach neighborhoods where ocean air works on metal parts day and night.
Replacement Cost & What’s Included
Here’s our pricing for Mr-Glass window installation and part replacement in Pompano Beach, per window:
| Service | Installed Price Range | What’s Included |
|---|---|---|
| Balance replacement | $85-$140 | OEM or measured aftermarket balance, shoe replacement if needed, track cleaning, tension calibration |
| Weatherstripping replacement | $65-$110 | All four sides, compression seal at meeting rail, sash realignment |
| Insulated glass unit replacement | $260-$520 | New IGU built to Mr-Glass specs, glazing, reseal, sash reinstall |
| Full sash transplant | $210-$390 | New or salvaged Mr-Glass sash, all hardware matched, tilt and lock tested |
Every quote is line-itemed before work begins. Labor is one number, parts are another, and we don’t pad either with vague “installation fees.” The price we hand you is the price on the invoice. Ed Winslow’s name is on the business, which means we don’t write invoices with change orders attached. If you’re a senior or a veteran, take 10% off everything above, permanently. If any repair on this page runs over $200, take $40 off.
All Mr-Glass work carries our workmanship warranty: if it’s not done right, we come back and make it right. That’s the 36500-Day Done Right Promise, and it’s not marketing language. It’s a hundred years of accountability, which is what Ed thinks a window company should offer in Pompano Beach.
DIY or Call Us?
You can safely check a few things yourself: run your hand along the track to feel for grit, inspect the weatherstripping for flattening, confirm the lock engages. That’ll tell you what’s wrong, which is useful.
Here’s where DIY goes sideways: balances and sash springs are under tension. Mr-Glass balance systems use springs that can unload during removal and take a finger off. We’re licensed, background-checked, and we’ve done hundreds of these in Pompano Beach. A balance swap takes us about thirty-five minutes per window. A homeowner’s first attempt, which starts at the hardware store with the wrong part, ends with a call to us anyway. Call (904) 893-3309 and describe what you’re seeing. We’ll quote it over the phone.
Winslow Windows & Doors is an independent service provider, not affiliated with Mr-Glass. We’re authorized installers of the Mr-Glass line and we also stock parts for PGT, CGI, and CWS.
FAQs
Mr-Glass window installations and their hardware parts last 10 to 18 years in Pompano Beach, depending on sun exposure, proximity to the Intracoastal and ocean, and how often the window is opened. East-facing windows fail first. Ed’s crews know which parts go first and carry spares on the trucks for the common failures.
Balance shoes, tilt latches, and tracks can sometimes be repaired, but we’ll tell you straight if a replacement is the honest answer: if a balance spring has lost tension, there’s no way to restore it. If a shoe is cracked, epoxy won’t hold under sash weight. If it’s a worn track surface, replacement is the only fix. Call (904) 893-3309 and we’ll walk you through it.
A single balance, weatherstripping, or tilt latch swap takes about 30 to 45 minutes once we’re at the window. A full IGU replacement takes about an hour. If you’ve got multiple windows with the same issue, we’ll do them all in one visit, which is the better deal on trip time and our no-trip-charge promise.
We stock the most common Mr-Glass-compatible balances, shoes, seals, and tilt mechanisms on our trucks, so many Pompano Beach repairs are done same-visit. For less common Mr-Glass series or custom-size IGUs, we order from our supplier network and typically have the part within three to five business days.
Call Winslow Windows & Doors
If your Mr-Glass window is dragging, fogging, whistling, or won’t stay open, call (904) 893-3309. We’re local to Pompano Beach, Ed Winslow owns the company, and a real person answers the phone. Every call is free, every estimate is free, and if you’ve got a written estimate from anyone else, bring it in and we’ll give you a free second opinion. We’ll show you exactly what failed, exactly what it costs, and exactly how long the fix takes. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.