Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterMr-Glass Window Replacement: The Pompano Beach Owner’s Guide
We stock and install Mr-Glass-compatible window replacement parts across Pompano Beach, with most swaps running $140 to $420 installed depending on the hardware, glass type, and whether the frame needs realignment. We carry common Mr-Glass balances, pivot bars, tilt latches, and replacement sashes on our trucks, so a technician can usually handle the job in a single visit. The way most Pompano Beach homeowners discover the problem is simple: the sash won’t stay up, the window won’t lock, or the tilt mechanism lets go without warning, usually after years of salt air and humidity working on the original parts.
Ed Winslow’s crew has been pulling failed Mr-Glass hardware out of windows across Cypress Cove, Garden Isles, and Cresthaven since 2011. We know exactly which parts Mr-Glass used on which series, and we know the difference between a part that’s tired and a part that’s gone.
Which Mr-Glass Models This Applies To
Mr-Glass built its reputation on mid-range horizontal sliders and single-hung windows installed heavily in South Florida condominium and townhome projects. If your window has a Mr-Glass label on the spacer bar, corner of the sash, or the frame extrusion, we can match it. The label matters because Mr-Glass used different balance systems across their production years: coil balances on many older single-hungs, block-and-tackle balances on later horizontal sliders, and a mix of pivot bar styles depending on whether the sash was aluminum or vinyl.
Here’s the compatibility gotcha most owners don’t know: Mr-Glass sash dimensions are often metric, not fractional-inch. A window that measures 35-3/8 inches wide is not the same as one at 35-1/2. The difference is small enough to fool a tape measure at a glance, but big enough that the wrong sash will bind, leak, or refuse to seat against the weatherstripping. We measure with calipers, not eyeballs, and we’ve learned to trust the label over the ruler when the two disagree.
On the OEM versus aftermarket question for Mr-Glass specifically: original Mr-Glass parts are still available for most series, but they carry a price premium that’s often hard to justify on a 15-year-old window. Quality aftermarket balances and pivot bars from the manufacturers we trust hold up just as well in Florida weather, and they typically cost 40 to 60 percent less. We’ll show you both options with honest numbers and let you decide. Winslow Windows & Doors is an independent service provider, not affiliated with Mr-Glass, so our recommendation is based on what works, not on what the factory wants you to buy.
Signs Your Mr-Glass Window Replacement Is Failing
- The sash drops hard when you try to tilt or open it. This is almost always a balance failure. The spring tension in a Mr-Glass coil balance gives out gradually, so the first sign is usually a sash that feels heavier than it used to, then one day it just won’t hold position at all.
- The window locks but won’t seal shut at the meeting rail. Worn pivot bars or a bent cam allow the sash to shift slightly, so the lock latches but the weatherstripping at the top or bottom shows daylight. In Pompano Beach, that gap is how you get moisture inside the wall cavity during summer storms.
- You hear a rough grinding or feel resistance when sliding the sash. Salt corrosion builds on the pivot bar and balance shoe over time, especially in homes within a mile of the Intracoastal. The fix is usually a replacement part, not a lubrication job, because the metal has already started to pit.
- The tilt latch tab broke off or won’t spring back. Mr-Glass tilt latches are plastic on most series, and plastic doesn’t age well in South Florida heat. Once one ear of the latch snaps, the sash can no longer be secured in the tilted position.
- Condensation or haze between the glass panes. This means the insulated glass unit has lost its seal. It’s not a hardware problem, but it’s a Mr-Glass window replacement all the same, and we handle sash replacement with new IGUs matched to the original glass spec.
Replacement Cost & What’s Included
Installed Mr-Glass window replacement in Pompano Beach lands in these ranges:
- Single balance replacement: $140 to $210 installed
- Balance pair with pivot bars: $210 to $320 installed
- Full sash replacement (new glass, sash frame, hardware): $280 to $420 installed
- Complete window unit replacement (Mr-Glass-compatible impact window from our lineup): $650 to $1,200 per opening depending on size and impact rating
What drives the range is mostly the age of the window and whether the frame tracks need cleaning, straightening, or shimming while we’re in there. We give you a written line-item quote before any work starts, so the balance replacement doesn’t turn into a $400 surprise. The price we quote is the price you pay, and every Mr-Glass replacement part we install carries our 36500-Day Done Right Promise. If the part fails or the workmanship isn’t right, Ed Winslow makes it right. No fine print, no prorated nonsense.
DIY or Call Us?
You can safely check a few things yourself before you call: read the label on the sash corner to get your Mr-Glass model and glass spec, measure the sash width and height, and note whether the failure is on the left side, right side, or both. That information helps us bring the right part on the first trip, and some Pompano Beach owners enjoy knowing exactly what they’re dealing with.
Where DIY goes wrong on Mr-Glass windows is when homeowners try to remove the sash without releasing the block-and-tackle balance correctly. The spring inside those balances is under real tension, and when it lets go, it takes the window track, your drywall, or a fingertip with it. It’s not a scare tactic; it’s just what happens. We’ve fixed more than one window where a homeowner got the sash halfway out and then called us because the balance retracted into the frame and jammed. That repair costs more than the balance itself would have. If the window is fighting you, stop and call (904) 893-3309. Every call is answered by a live person, any hour, any day, and we’ll tell you honestly whether it’s a job for us or something you can finish yourself.
FAQs
Realistically, Mr-Glass balances and tilt latches last 10 to 15 years in Pompano Beach before salt air, heat, and humidity start breaking them down. Windows within a half-mile of the ocean tend to fail on the earlier end; inland neighborhoods like Palm Aire can go longer before hardware gives out. For an exact assessment of your window, call (904) 893-3309 and we’ll take a look.
Sometimes. If the issue is a worn pivot bar or a balance shoe that’s sticking, we can often repair the existing part rather than replace the whole sash or balance assembly, which saves real money. But on Mr-Glass series where the balance is sealed into the frame, replacement is the only honest fix. We’ll tell you which one applies to your window, not which one pads the invoice. Call (904) 893-3309 for a free estimate either way.
A single balance or pivot bar replacement takes 30 to 45 minutes once we’re at the window. A full sash replacement with new glass runs about an hour per window. We carry most common Mr-Glass parts on our trucks, so there’s usually no waiting on a parts order for balances and hardware. Call (904) 893-3309 and we’ll get you scheduled.
We stock the most common Mr-Glass replacement parts on our trucks: coil balances, block-and-tackle balances, pivot bars, tilt latches, and weatherstripping for the series we see most often in Pompano Beach. Less common parts, like full sash replacements for older or odd-sized units, take a few days to order, and we handle all of that for you. We also stock compatible parts for PGT, CGI, and CWS windows if you have a mix of brands in your home.
Get Your Mr-Glass Window Fixed in Pompano Beach
My name is on it, so it has to be right. That goes for a $19 pivot bar or a $1,200 impact window, and it’s why over 15 years of work in Pompano Beach and across Broward County, we’ve never had a customer chase us down for a warranty we didn’t honor. The 36500-Day Done Right Promise is a century-long guarantee because we’re not going anywhere, and neither is Ed Winslow’s name that’s on the truck and on every job we do.
Call (904) 893-3309 for a free estimate on your Mr-Glass window replacement. A live person answers, we give you upfront pricing before any work begins, and we’ll show up on time in a uniformed truck with background-checked technicians. You’ll also get $40 off any repair over $200, and seniors and veterans always get 10 percent off. The one down the road is ready when you are.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.