Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Roof Repair in Pompano Beach: What to Know First
Mr-Glass roof repair in Pompano Beach typically runs $275-$850 depending on whether we’re fixing flashing, sealing a skylight curb, or replacing a damaged roof panel section, and most jobs are done in a single visit. We’re an independent Mr-Glass service provider, not a manufacturer warranty center, which means we diagnose honestly and fix what’s actually broken instead of upselling a full replacement. If you own a Mr-Glass sunroom, patio enclosure, or glass roof in Pompano Beach and you’ve noticed a drip, a fogged panel, or water staining along the frame, this page is for you. Call (904) 893-3309 and Ed’s crew will walk you through what’s going on before we ever send a truck.
How Mr-Glass Products Fail, and How We Fix Them
- Aluminum frame joint separation on older Mr-Glass mansard roofs. Pompano Beach’s salt air and afternoon thunderstorms put real stress on the corner connectors and splice joints in Mr-Glass’s aluminum framing systems. When those joints loosen, water finds its way under the glass and into the ceiling below. We reset the frame, re-seat the gaskets, and seal with a marine-grade polyurethane that holds up in coastal Florida conditions.
- Weeping track clogs in Mr-Glass sliding glass roof panels. Mr-Glass roof systems that include operable or sliding panels drain through narrow weep channels in the bottom track. Leaves, pollen, and sand from Pompano Beach’s coastal breezes clog those channels within a year or two. The result is standing water in the track that eventually seeps indoors. We clear the weeps, flush the full channel length, and correct the fall so water drains toward the downspout instead of pooling.
- Failed butyl tape at the glass-to-frame seal on curved Mr-Glass sections. Mr-Glass offers curved glass roof elements on some sunroom and lanai enclosures, and those curved panels rely on a butyl tape bed between the glass and aluminum. South Florida’s UV load bakes that tape brittle over 8-12 years. A fogged or hazy Mr-Glass panel is the early warning; water follows soon after. We deglaze the panel, remove the failed sealant, apply new OEM-spec butyl, and re-install the glass without disturbing the surrounding panels.
- Improper slope on site-built Mr-Glass patio covers. Mr-Glass products are engineered with specific minimum pitch requirements. We regularly see Pompano Beach installations where a previous contractor flattened the slope to gain headroom or match an existing eave. That shallow pitch means water sheets across the glass, sits at the frame corners, and works its way under the end caps. We re-pitch when the structure allows, or we retrofit a raised curb and corner flashing system when it doesn’t.
- Condensation between glazing layers on insulated Mr-Glass units. Mr-Glass insulated glass units (IGUs) carry a desiccant-filled spacer that should last the life of the glass. Once the seal fails, Pompano Beach humidity turns the inside of the panel permanently fogged. Some shops will tell you the whole roof needs replacement. Most of the time we can order a matching IGU from a glass fabricator in Broward County, swap the panel, and you’re dry for another decade.
Our Mr-Glass Roof Repair Process
- 1
Call and talk to a person. You reach a live voice at (904) 893-3309, day or night. We ask what you’re seeing, collect photos if you have them, and schedule a visit that fits your day.
- 2
On-site diagnosis. Our uniformed tech walks the roof or gets eyes on the underside, checks the frame slope, tests the seals, and identifies the exact failure point. We tell you what’s wrong in plain English before any work is approved.
- 3
Parts decision. If it’s a Mr-Glass glass panel or gasket, we quote OEM where available and quality aftermarket where it’s faster or better suited to Pompano Beach’s salt environment. You see the line-item difference on paper.
- 4
The repair. We do exactly what was quoted. No change orders, no “while we’re up here” add-ons you didn’t ask for.
- 5
Water test and cleanup. We run water over the repaired section, confirm no leaks, clean the glass, and haul off any removed parts.
- 6
The 36500-Day Done Right Promise. If it leaks again or the repair doesn’t hold, we come back and make it right. Ed’s name is on the door, and on every job we do.
What Mr-Glass Roof Repair Costs in Pompano Beach
Here’s what we’re seeing across Pompano Beach right now for Mr-Glass work:
- Weep track cleaning and drainage correction: $150-$275
- Frame joint re-seal (per joint, including sealant and labor): $95-$180 per joint
- Single glass panel re-glaze (curved or flat): $350-$700 depending on panel size and crane access
- Insulated Mr-Glass IGU replacement: $400-$850 installed
- Flashing and curb repair around a Mr-Glass skylight: $275-$600
What moves the price is access. A Mr-Glass roof over a second-story lanai in Cypress Cove with no ladder clearance costs more to work safely than a ground-level patio enclosure in Harbor Village. Single-story, walkable roofs are always cheapest. You’ll get a written line-item quote before work starts, and that number is the number you pay. Call (904) 893-3309 for a free estimate.
Why Pompano Beach Homeowners Call Winslow Windows & Doors for Mr-Glass Work
We’ve been on roofs across Broward County since 2011, and Ed Winslow has personally run jobs in Pompano Beach neighborhoods where homeowners know their impact ratings and their water intrusion points better than most contractors. We service Mr-Glass because that’s what’s on people’s roofs here, but we also install and repair PGT, CGI, CWS, and ES Windows, which means when your Mr-Glass sunroom meets a PGT impact wall, we already know how they tie together. Calls are answered by a live person at any hour. Every tech is background-checked and uniformed. And our 36500-Day Done Right Promise means we don’t disappear after the invoice clears. Upfront pricing. No surprises on the invoice.
FAQs
No, not when the repair is done correctly. A leak repair on the frame, flashing, or drainage system doesn’t touch the glass warranty unless the glass itself was the failure point. If the IGU seal failed, Mr-Glass may cover the unit under its own warranty terms, and we’ll tell you honestly whether a warranty claim is your better path before we quote any work.
Yes, in nearly every case. We source Mr-Glass-compatible glass through fabricators who cut to the exact panel dimensions, glass tint, and thickness your roof uses. For heavily weathered roofs where the surrounding glass has aged, we can order a slight tint adjustment so the new panel doesn’t stand out against the old ones. Exact match, no guesswork.
Leaks are urgent, and we treat them that way. Call (904) 893-3309 and we’ll typically have a tech on your roof within a day, often same-day if you catch it early in the morning. We can’t promise same-day for every call because Pompano Beach thunderstorms create spikes in demand, but a live person will tell you exactly when we’re coming.
Repair when the frame is sound, the panels are clear, and the leak is confined to flashing, gaskets, or drainage. Replace when multiple insulated panels have failed seals, the aluminum shows corrosion at structural points, or the roof pitch can’t be corrected. We’ll give you an honest answer either way, with numbers for both options, and we won’t push replacement unless repair stops making financial sense.
Every Mr-Glass repair we do is covered by our 36500-Day Done Right Promise. If it’s not done right, we make it right. That’s the standard Ed Winslow built this company on, and it doesn’t expire after a year or five. It’s the same promise we make on every window, door, and roof project we touch in Pompano Beach.
If your Mr-Glass roof is leaking, fogged, or just makes you nervous every time the summer storms roll through, call (904) 893-3309. We’ll send a tech who knows Mr-Glass, quote you a straight price, and stand behind the work. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.







Before
After
Before
After
Before
After