Mr-Glass Roof Replacement & Installation Nationwide | Winslow Windows & Doors

Mr-Glass Roof Replacement & Installation in Pompano Beach: What to Know First

We provide independent Mr-Glass roof replacement and installation across Pompano Beach, typically completing most tear-off and reroof jobs within 5 to 10 working days depending on square footage, decking condition, and whether we’re matching existing Mr-Glass profiles or switching to a new system. Pricing lands honestly: most Pompano Beach Mr-Glass roof replacements run between $12,000 and $28,000, and we give you a written line-item quote before any work begins, not an estimate that drifts upward once the old roof comes off. If you own a Mr-Glass roof in Pompano Beach, Florida and you’re seeing leaks, lifted panels, or fasteners backing out, this page explains exactly what’s happening and what we do about it. Call (904) 893-3309 for a free estimate.

Call (904) 893-3309

This page is for homeowners in Pompano Beach and nearby Broward County neighborhoods like Cypress Cove, Garden Isles, and Cresthaven who bought a Mr-Glass roof and now need a trusted local crew to replace it or install a new one without the runaround. Ed Winslow’s name is on the business, and our crews have spent years working on Mr-Glass systems throughout Pompano Beach, so we know these roofs the way a mechanic knows a specific engine.

Key Takeaways

• We replace and install Mr-Glass roofs throughout Pompano Beach, including matching existing Mr-Glass profiles.
• Typical replacement jobs run 5 to 10 working days, with a written line-item quote upfront.
• Most Pompano Beach Mr-Glass roof replacements cost between $12,000 and $28,000.
• We handle permits, inspections, and code compliance for Broward County and Pompano Beach.
• Every job is backed by the 36500-Day Done Right Promise and a published address and license number.

How Mr-Glass Roofs Fail in Pompano Beach, Florida and How We Fix Them

Mr-Glass has produced several metal and panel roofing lines over the years, and in Pompano Beach we see a few failure patterns repeat themselves. Here’s what actually goes wrong on these roofs in South Florida, and what we do about it.

• Fastener back-out on Mr-Glass standing seam panels. On older Mr-Glass standing seam roofs, the stainless fasteners at the panel clips work loose over thousands of thermal cycles, which Pompano Beach produces in abundance with our daily heat swings and salt air. The result is a panel that lifts slightly at the seam and starts rattling in wind, then leaks at the penetration point. We pull the affected panel, inspect the clip and decking underneath, replace any rusted clips with new stainless hardware rated for coastal exposure, and re-secure the panel with the correct torque spec. Then we re-seal the seam with a urethane sealant rather than a cheap caulk that dries out in one summer.
• Pan head flashing failures where Mr-Glass panels meet the ridge cap. Mr-Glass ridge caps on some older installations were flashed with exposed neoprene washers that harden and crack after 7 to 10 years of Pompano Beach UV exposure, leaving a water path straight down the roof slope. We remove the old ridge cap, inspect the underlying closure strips, replace any deteriorated foam with closed-cell closures, and re-flash the entire ridge with proper metal-to-metal sealant and new fasteners. This is a fix we do regularly in Cypress Cove where homes sit close to the Intracoastal and get more of that salt mist than inland neighborhoods.
• Condensation and trapped moisture at Mr-Glass panel overlaps. Broward County humidity is a fact of life, and certain Mr-Glass panel profiles with shallow overlap geometry trap condensation between the laps rather than draining it. Homeowners notice water stains on the decking during winter months when temperature swings are biggest, even when it hasn’t rained. The fix is usually a combination of improving the underlayment, adding a breathable barrier, and re-pitching or re-lapping the affected panels. In some cases we install a vented ridge that lets the roof breathe and stops the moisture from collecting in the first place.
• Corrosion at Mr-Glass panel cut edges near the eave line. On homes within a few blocks of the ocean in Pompano Beach, we see galvanic corrosion start at the exposed cut edges of Mr-Glass panels where the factory coating is thin. The steel underneath oxidizes, the edge swells, and water wicks up under the paint film. On replacement jobs, we cut panels with a shear rather than an abrasive blade (abrasive sparks strip the edge coating), treat every cut edge with a liquid galvanizing compound, and install the panels so cut edges sit away from prevailing rain, which in Pompano Beach means keeping exposed cuts off the east and southeast elevations.
• Underlayment degradation on Mr-Glass tile roof replacements. Homes in Pompano Beach with Mr-Glass metal tile profiles occasionally fail not at the metal at all, but at the underlayment underneath. The original installers used a felt product that degrades in Florida’s heat, and by the time the homeowner sees a ceiling stain, the decking is already soft. We strip the tiles, replace rotted decking sections, and install a modern high-temperature self-adhered underlayment rated for South Florida that keeps water out even if a tile breaks or lifts in a storm.

Our Mr-Glass Roof Replacement & Installation Process

Here’s how a Mr-Glass roof replacement or installation goes with us, from the first call to the final inspection, with no mystery steps or hidden handoffs.

1. 1
   Call and scheduling. You call (904) 893-3309 and a live person answers, day or night. We schedule a time to look at your Pompano Beach roof, and there’s no trip charge inside Broward County.
2. 2
   Roof assessment and measurements. Our technicians arrive in uniform, introduce themselves by name, and inspect the existing Mr-Glass roof, the decking, the flashing points, and the attic ventilation. We measure every plane and note any Mr-Glass-specific conditions like panel profile, seam type, and existing fastener condition.
3. 3
   Written quote with OEM vs aftermarket options. We write you a fixed, line-item quote showing two options where it matters: matching Mr-Glass panels via original manufacturers where still available, or a quality aftermarket profile that matches the visual and performs as well, often at a meaningful savings. We also walk you through what the quoted work includes, from underlayment to flashing to ridge vent, so there’s no guesswork on the invoice.
4. 4
   Permit pull and material ordering. Once you approve, we pull the Pompano Beach and Broward County permits, order materials, and schedule the tear-off. We coordinate any required inspections and make sure the job is ready for the building official when they arrive.
5. 5
   Removal, repair, and installation. We tear off the old roofing, replace any damaged decking, install the new underlayment and Mr-Glass roof system per current Florida code including wind-load requirements for Broward County, and flash every penetration, wall, and transition properly. Our crew keeps the site clean as they work and at the end of every day.
6. 6
   Final walkthrough and the promise. Ed or the lead technician walks the finished roof with you, answers every question, and reviews what was installed. Every job carries the 36500-Day Done Right Promise: if it’s not done right, we make it right.

What Mr-Glass Roof Replacement & Installation Costs in Pompano Beach

You deserve real numbers, so here they are. These reflect what we’ve quoted and completed on Mr-Glass homes across Pompano Beach this year, and they’re based on actual neighborhood conditions: single-story and two-story homes, Broward County wind-load rules, and the fact that Coastal Pompano Beach and inland Pompano Beach have different corrosion requirements.

What moves the price is the same every time: roof size and number of roof planes, decking condition once we open up the old roof, whether we’re matching original Mr-Glass profiles or installing a comparable aftermarket system, and the access conditions on your particular Pompano Beach lot. We don’t pad bids, and if the decking is in good shape, you pay the quoted number, not a change order. Call (904) 893-3309 for your free, line-item estimate.

Why Pompano Beach Homeowners Call Winslow Windows & Doors for Mr-Glass Work

We’re the local alternative to a ticket number at a big chain. We’ve been doing this since 2011, with a published address and license number you can verify, and an owner whose name is on every invoice. Ed Winslow grew up in Miami, went through the Building Construction Technology program at Miami Dade College, and has spent years running installations across Broward County, including Pompano Beach neighborhoods like Cypress Cove where impact ratings and wind codes aren’t marketing copy, they’re what keeps a roof on the house in August. His name is on it, so it has to be right.

When a Mr-Glass customer calls us, they get a background-checked technician in a clean uniform who knows exactly what to look for on a Mr-Glass panel system, not a generalist who’s never seen a shallow-lap standing seam profile. And if your roofing situation points you toward a different direction, we’re an authorized installer for PGT, CGI, CWS, and ES Windows as well, so you’re working with one local company who understands the whole envelope of your home. The 36500-Day Done Right Promise is on every job, and a live person answers the phone at 2 a.m. because storm damage doesn’t check business hours. The one down the road.

Frequently Asked Questions About Mr-Glass Roof Replacement in Pompano Beach