Therma-Tru Impact Windows Nationwide | Winslow Windows & Doors

Therma-Tru Impact Windows in Pompano Beach: What to Know First

We install and service Therma-Tru impact windows throughout Pompano Beach, and we’ve done it long enough to tell you straight: the job usually takes one to two days, and the honest price for most Therma-Tru impact window replacements in this area lands between $900 and $2,400 per opening, installed, depending on the line and the condition of the existing frame. We’re an independent Therma-Tru service provider, which means we answer to you, not a manufacturer’s warranty department. If you own a Therma-Tru product in Pompano Beach and you’re wondering whether it’s holding up the way it should, this page is for you. Call (904) 893-3309 and Ed Winslow or one of our crew will tell you what we’re seeing out there.

Call (904) 893-3309

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru builds solid doors and windows, but nothing survives South Florida salt air and hurricane season without eventually showing its age. Here’s what we see most often on Therma-Tru impact windows in Pompano Beach:

• Smooth-Star frame seal failure. The Smooth-Star line is common in Pompano Beach homes built in the early 2000s, and we regularly find the weatherstripping channel pulling away from the frame at the bottom corners. That thin gap lets humid air in and pushes your A/C bill up. We pull the sash, clean the channel, re-bed the weatherstripping with a marine-grade adhesive, and reset the corner seals.
• Classic-Craft sill rot at the exterior corners. Classic-Craft products look like wood but the sill extrusion doesn’t always shed water the way you’d hope in a Pompano Beach afternoon downpour. We see rot start at the exterior corners where water pools. The fix usually involves cutting out the damaged sill section and installing a rot-proof composite sill cap, then flashing it properly so water doesn’t sit there again.
• Impact glass delamination in older units. If you’ve got Therma-Tru impact windows that are 15-plus years old, the laminated glass layers can start to separate at the edges, especially on west-facing walls that take the full Pompano Beach sun. You’ll see a milky haze creeping in from the frame. That’s not a glazing trick - the interlayer is failing. We replace the glass unit and inspect the frame for stress cracks while we’re in there.
• Hardware misalignment on heavier sashes. Impact-rated sashes are heavy. On some Therma-Tru slider configurations, the roller assemblies wear unevenly and the sash starts dragging on the track, which then wears a groove in the track itself. We replace the rollers with upgraded stainless carriers and re-shim the track if it’s grooved. Leaving it alone just makes the frame work harder until something cracks.
• Condensation between panes on northern exposures. If you live in a Pompano Beach neighborhood like Cypress Cove or Harbor Village, you know north-facing windows get less sun year-round. When the desiccant in the spacer bar saturates, you get fogging between the panes that never clears. The glass is no longer doing its thermal job. We measure the unit, source a replacement that matches the original sightline, and swap it without disturbing the surrounding stucco or trim.

Our Therma-Tru Impact Windows Process

1. 1
   We listen first. You call (904) 893-3309, a live person answers, and you tell us what you’re seeing. No voicemail, no call center. Twenty-four hours a day, someone picks up.
2. 2
   We schedule the diagnostic visit. A background-checked Winslow technician in uniform arrives at your Pompano Beach home, inspects every Therma-Tru unit in question, and explains in plain English what’s failing and why.
3. 3
   We lay out the parts decision. For Therma-Tru impact windows, there are some parts we source OEM because the tolerances matter, and some quality aftermarket parts that are actually better for our salt-air environment. We tell you which is which and what each option costs before anyone touches a screwdriver.
4. 4
   We do the work. Whether it’s a glass replacement, a frame rebuild, a hardware swap, or a full window replacement, our crew handles it on site, keeping the opening weather-protected the whole time.
5. 5
   We test and verify. After any replacement or repair, we check the seal, cycle the sash repeatedly, and confirm the window operates the way Therma-Tru intended when it left the factory.
6. 6
   We stand behind it. The 36500-Day Done Right Promise is exactly what it says. If it’s not done right, we come back and make it right. Ed’s name is on the business, which means his word is on your window.

What Therma-Tru Impact Windows Costs in Pompano Beach

We give you straight numbers because that’s how we run our business. Here’s what Therma-Tru impact window work typically runs in Pompano Beach as of this year:

• Glass unit replacement (fogged, hazed, or cracked impact glass): $450 - $850 per window, depending on size and glass package.
• Hardware replacement (rollers, locks, sash balances, hinge sets): $180 - $420 per window.
• Weatherstripping re-bed and corner seal repair: $160 - $300 per window.
• Full impact window replacement (standard sizes, no frame reconstruction): $900 - $1,600 per opening, installed.
• Full impact window replacement (custom sizes or frame rebuild required): $1,700 - $2,400 per opening, installed.

What moves the price: the Therma-Tru line you own, whether it’s a standard or custom size, the condition of the existing frame, and whether the glass package includes low-E or other coatings. You’ll get a written line-item estimate before we start, and that number doesn’t change unless you change the scope. Call (904) 893-3309 for your free estimate.

Why Pompano Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work

We’ve been around since 2011, which in Florida contractor years is about a century. Ed Winslow started this company in Broward County and still runs it himself - a published address, a license number you can look up, and a phone that rings to a real person. Every technician who pulls up to your Pompano Beach home is background-checked and in uniform, so you know who’s walking through the gate before the truck stops. We’re authorized installers for PGT, CGI, CWS, and ES Windows alongside Therma-Tru, so if your window is beyond saving, we can show you options across the brands that actually hold up in this climate, not just one line with a sales pitch attached. And the 36500-Day Done Right Promise means we don’t get to walk away from a job we didn’t do right. We wouldn’t want to. Ed grew up in Miami and learned the trade at Miami Dade College’s Building Construction Technology program, where he figured out quickly that a poorly sealed window in South Florida weather isn’t a cosmetic issue - it’s a liability. You can call us at 2 a.m. and someone will answer. That’s not a marketing claim. That’s the phone number.

FAQs