Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Pompano Beach: What to Know First
Independent Therma-Tru roof replacement and installation in Pompano Beach runs most homeowners between $8,400 and $22,000 depending on roof size, material choice, and underlayment condition. Most full replacements on single-family Pompano Beach homes take three to five working days once materials land. We’re a locally owned installer that works on Therma-Tru door and window systems daily, and roofing is one part of the exterior protection envelope we’ve handled since 2011. Call (904) 893-3309 for a free estimate with a real person on the other end.
This page is for Pompano Beach homeowners who own Therma-Tru entry systems, patio doors, or window units and need a roof replacement that won’t damage or compromise those products. If you’re weighing repair versus replacement, wondering what this should cost in Broward County, or trying to figure out why your Therma-Tru unit is leaking from above, you’re in the right place.
Key Takeaways
- Therma-Tru products don’t fail from the door itself in most Pompano Beach cases. The roof flashing, underlayment, or decking above them does.
- Roof replacement around Therma-Tru door and window frames requires different flashing protocols than standard exterior work.
- We quote fixed, line-item pricing before work starts. No change orders, no surprise add-ons mid-job.
- Our 36500-Day Done Right Promise covers the work. If it isn’t right, we come back.
- Free estimates, no trip charge inside Broward County, and a permanent 10% discount for seniors and veterans.
How Therma-Tru Products Fail - and How We Fix Them
We don’t see many Therma-Tru doors or windows fail on their own in Pompano Beach. What we see is what happens around and above them. Here are the five failure patterns we run into on Therma-Tru jobs, and how we handle each one.
- Roof-to-wall flashing failure above Therma-Tru Classic-Craft entry doors. The Classic-Craft line is built like a tank, but the roof junction above it is a common leak source on Pompano Beach homes where original builders used cheap step flashing. Water wicks behind the stucco and travels down to the door head, staining the casing and rotting the jamb. We strip that section, install new peel-and-stick membrane and metal step flashing, and re-seal the gap before the new roof goes down.
- Failed roof penetrations above Therma-Tru sliding patio doors. Slides, especially the 5500 and 450 Series, sit under wide spans of roof where vent pipes and skylights punch through. When those boots dry-rot in Florida sun, water rides the deck straight to the door header. We replace all penetrations as part of a roof replacement here, not just the damaged ones.
- Deteriorated underlayment above Therma-Tru window banks. Pompano Beach homes with multiple Therma-Tru fixed windows in a row often have a failing underlayment above them that shows as peeling paint at the top of the frame, not as a clear leak. By the time you see the water stain, the decking may be soft. We probe with a moisture meter before quoting, so you know what we’re actually dealing with.
- Improper freeze/thaw or hurricane-cycle flashing from a previous install. We regularly pull back old flashing around Therma-Tru frames in Pompano Beach and find the original installer caulked instead of flashed. After a few South Florida storm seasons, the caulk separates and the leak starts. The fix is proper metal counterflashing and a positive lap, not more caulk.
- Therma-Tru frame cap sealant breakdown from salt air. Homes within a few miles of the beach in Pompano Beach get constant salt spray. Over time it eats the sealant where the roof edge meets the Therma-Tru frame cap. We use marine-grade sealants specified for coastal exposure when we do the replacement.
Our Therma-Tru Roof Replacement & Installation Process
- 1
Call and live answer. You call (904) 893-3309 and a human picks up, day or night. Ed or a member of his crew schedules your free estimate.
- 2
On-site inspection with marine-eye. We inspect the roof, the Therma-Tru frames, the flashing junctions, and the decking. We check for salt exposure, storm damage history, and existing water penetration with a moisture meter.
- 3
Line-item quote. We hand you a written quote that breaks out materials, labor, disposal, and flashing work specific to the Therma-Tru junctions. No vague “roof replacement - ol5,000” line. Every item is named.
- 4
Parts and materials decision. We source the correct underlayment, drip edge, and flashing material for the Therma-Tru product you have. Where OEM Therma-Tru frame accessories make sense, we use them. Where a quality aftermarket part does the same job with a better warranty, we tell you and let you choose.
- 5
Installation and flashing work. We pull the old roof, repair or replace decking as needed, lay new underlayment, and install the new roof with correct flashing at every Therma-Tru junction. This is where most jobs fail: the handoff between roof and door or window. We spend extra time here because it’s what keeps your frames dry for the next 20 years.
- 6
Final check and warranty. We water-test the flashings, walk the site with you, and leave your Therma-Tru product sealed and protected. The 36500-Day Done Right Promise covers everything we touched.
What Therma-Tru Roof Replacement & Installation Costs in Pompano Beach
Straight numbers, because that’s how people make decisions.
| Scenario | Typical Range in Pompano Beach |
|---|---|
| Full roof replacement, single-story 1,200-1,600 sq ft, architectural shingles | $8,400 - $12,800 |
| Full roof replacement, two-story 2,000-2,600 sq ft, architectural shingles | $13,000 - $18,500 |
| Full roof replacement with tile (common in Pompano Beach neighborhoods like Garden Isles) | $14,000 - $22,000+ |
| Flashing repair and re-seal around a single Therma-Tru door or window | $350 - $900 |
| Decking replacement (per 4×8 sheet) | $70 - $110 per sheet |
What moves the price: decking condition, roof pitch, number of Therma-Tru junctions requiring custom flashing, and whether you’re in a coastal zone requiring higher wind-rated materials. Cypress Cove and Imperial Point homes often need full underlayment replacement because of age and moisture, which adds material cost but saves you a future leak. Call (904) 893-3309 for an exact quote. Estimates are free and the number is a live person.
Why Pompano Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work
We’ve been doing this since 2011, and Ed Winslow’s name is on the door. That means when you call at 2 a.m. with water coming through a Therma-Tru frame during a storm, a real person answers. Not a call center. Not a voicemail. And our background-checked, uniformed technicians show up knowing exactly what they’re looking at.
We work on Therma-Tru systems all year across Pompano Beach, from Garden Isles to Cresthaven to Cypress Cove. That repetition means we know where these systems fail and how to fix them before the damage spreads. We also install PGT, CGI, CWS, and ES Windows products, so if your roof replacement reveals a window or door that also needs replacing, we can handle it in the same job rather than punting you to another contractor. The 36500-Day Done Right Promise covers the work. If it isn’t right, we make it right. Period.
FAQs
No, a roof replacement by an independent installer does not void your Therma-Tru product warranty, provided the work doesn’t damage the door or window frame and the flashing around it is installed correctly. We treat the Therma-Tru product as the protected asset on every job. For exact warranty terms on your specific model, check your Therma-Tru documentation, and we’ll help you document the work with photos for your records.
Yes. If a roof leak damaged a Therma-Tru threshold, sill, or frame component on your Pompano Beach home, we can source OEM Therma-Tru replacement parts for Classic-Craft, Smooth-Star, and other current lines. If a part has been discontinued, we’ll quote a compatible aftermarket option and explain the differences before you spend a dollar. Call (904) 893-3309 and we’ll walk it through with you.
Most full replacements take three to five working days after materials arrive. The Therma-Tru flashing work adds several hours because we hand-cut and seal each junction rather than using a one-size-fits-all approach. It’s the part of the job where speed trades against a leak-free fit, and we’ll take the extra time every time.
Not necessarily. If the leak is isolated to one flashing junction or one penetration, we can often repair the affected section without a full roof replacement. We’ll inspect, test with a moisture meter, and tell you honestly whether you need a surgical repair or a full roof. Our job is to give you the straight answer, not to sell you a roof you don’t need.
No. Our quotes are fixed once we’ve inspected the roof and decking. The only exception is if we open the roof and find decking rot that we couldn’t see from the underside. We’ll show you the damaged decking, explain what it costs to replace per sheet, and get your approval before any additional work. You will never get a surprise invoice from us. For a fixed, line-item quote, call (904) 893-3309.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.