3-Panel Sliding (3-Lite Roller) Windows

3-Panel Sliding (3-Lite Roller) Windows in Pompano Beach, FL | Winslow Windows & Doors

A 3-panel sliding window, sometimes called a 3-lite roller, is a horizontal window built around three glass panels in a single frame. Two panels stay fixed while one glides, or one stays fixed while two glide, depending on how you configure the opening. We install these impact-rated windows throughout Pompano Beach because they handle wide openings beautifully while meeting Florida’s strictest hurricane codes. If you’re replacing a large picture window, upgrading a lanai-facing wall, or building new in a coastal wind zone, this profile gives you wide views without sacrificing protection. Call Winslow Windows & Doors at (904) 893-3309 to talk through your opening size and get a free measurement.

Call (904) 893-3309

Product Overview - 3-Panel Sliding (3-Lite Roller) Windows

A three-panel horizontal roller configuration exists for one reason: wider openings. When a standard two-panel slider can’t span the wall cleanly, the third lite distributes the width so each panel stays manageable while the overall window stays rigid. In Pompano Beach, where canal-front and Intracoastal homes often feature wide living-room openings, this profile fits without forcing homeowners into a fixed-glass wall that doesn’t ventilate.

We install these windows with laminated impact glass across all three lites as standard on our impact series. That means every panel, fixed or operable, carries the same PVB interlayer that holds glass in the frame under impact. The operable panels ride on smooth roller tracks, and the fixed panels seat into reinforced frame pockets. You get the ventilation of a slider with the structural continuity of a fixed window. It’s the configuration we recommend most often for rooms that face the water or catch the afternoon sea breeze in Pompano Beach.

The frame itself comes in aluminum or vinyl, each with its own strengths. Aluminum carries larger lites with slimmer sightlines, which matters on wide spans. Vinyl offers thermal performance and a softer interior look. Both are built to accept the impact glazing package and both are installed by our own Pompano Beach crew under the same HVHZ installation discipline. Call (904) 893-3309 and we’ll walk you through which frame makes sense for your opening.

Technical Specifications

• Frame materials: Aluminum, Vinyl
• Track configurations: 3-Lite (2 Fixed + 1 Operable), 3-Lite (1 Fixed + 2 Operable)
• Glass options: Laminated Impact Glass (PVB Interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass
• Finish options: White, Almond, Bronze, Black, Tan
• Screen options: Retractable Screen, Sliding Screen
• Design pressure: Matched to your wind zone, up to +/-100, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements

Every 3-panel slider we quote in Pompano Beach gets sized to the actual rough opening. We don’t force standard sizes into non-standard walls. The track configuration, finish, glass package, and screen type are all selected per project, never pulled off a fixed menu. That keeps the window performing as engineered in your specific wind zone rather than as a generic unit that happens to fit.

Hurricane & Compliance Performance

Laminated Impact Glass – Every lite in this window carries a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack but the interlayer holds the pane in the frame, keeping wind and rain on the outside where they belong. This is the same glazing approach used across our impact series in Pompano Beach and throughout Broward County.

Miami-Dade NOA / FL Product Approval – The 3-panel slider carries Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers, issued per configuration. That means the specific size, glass package, and frame combination you order has its own approval documentation. We verify the exact numbers on your quote so your permit submittal is clean.

FBC / HVHZ Compliance – The window is engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. Pompano Beach sits firmly inside the HVHZ, so this isn’t an optional upgrade. It’s the baseline for any impact window installed here. We don’t sell non-HVHZ product into this market.

TAS Testing Context – HVHZ-rated products are tested under a protocol family that includes TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). These aren’t marketing labels. They describe the physical tests this window family must pass before it carries a NOA. We reference them so you know the product’s approval isn’t theoretical.

Design Pressure for Your Wind Zone – Design pressure is a PSF rating, not a wind speed. We match the rating to your specific wind zone, up to +/-100, and never higher. Over-specifying a window beyond your zone adds cost without adding safety. Your Pompano Beach location, exposure category, and building height all feed the calculation. We’ll show you the number on your quote.

Energy Performance – Low-E and insulated glass options are available for this window. If your opening faces west or east in Pompano Beach, Low-E cuts solar heat gain through the glass. Insulated glass adds thermal separation across the airspace. Impact ratings remain intact with either option, because the laminated layer is what does the structural work.

Color & Glass Options

Pompano Beach architecture leans coastal and Mediterranean. White frames remain the default for stucco exteriors and bright interiors, but Almond and Tan read warmer against terra-cotta roofs and sand-toned facades. Bronze and Black frames work well on modern builds and deeper exterior palettes, especially along the Intracoastal where darker trim is common. Whatever finish you choose, it’s a factory-applied color, not a field paint job, so it holds up to the salt air and UV exposure we see year-round in Pompano Beach.

On glass, clear laminated impact is the most economical path to code compliance. Tinted glass steps up glare control for east- and west-facing rooms. Low-E insulated glass is our recommendation when the window sits on a heavily sun-loaded wall and you want to keep the interior comfortable without cranking the AC. All glass packages maintain the laminated impact layer, so the performance story doesn’t change when you choose energy upgrades.

Installation by Winslow Windows & Doors in Pompano Beach

An NOA-rated window is only as good as its installation. We’ve pulled hurricane-impact windows out of Pompano Beach homes where the product was fine but the install wasn’t. The frame was shimmed wrong, the perimeter seal was inconsistent, or the rough opening wasn’t flashed to handle a driving rain. That’s exactly how a compliant window becomes a non-compliant opening.

Our installation process starts with a pre-install inspection of the rough opening, the surrounding framing, and the existing flashing condition. We set every 3-panel slider level, plumb, and square. That’s not a slogan. A wide three-lite frame that’s racked even slightly will bind the rollers, strain the track, and eventually fail at the corner joints. We set the frame true before the first fastener goes in.

Around the perimeter, we use an AAMA 812 low-expansion foam sealant to create a continuous air and water seal between frame and structure. The installation practice follows AAMA 2400/2410 standards, which is the correct reference for field installation of windows in this application. After the frame is set and sealed, we run a water test on the sill and lower corners before trim goes back on. Cleanup happens the same day.

Pompano Beach sits in a coastal exposure zone, and depending on your exact address, the permitting authority may require NOA submittals before the permit is issued. We know what Broward County plans reviewers look for. We provide the approval documentation for your specific configuration so the permit isn’t the bottleneck. Call (904) 893-3309 to schedule a measurement and we’ll walk the project with you.

Frequently Asked Questions - 3-Panel Sliding (3-Lite Roller) Windows

Get a Quote - 3-Panel Sliding (3-Lite Roller) Windows in Pompano Beach

Ready to price your opening? Call Winslow Windows & Doors at (904) 893-3309 to schedule a free on-site measurement. We’ll confirm your rough opening size, walk through glass and finish options, pull the right NOA documentation for your Pompano Beach permit, and put a written line-item quote in your hands. No pressure, no generic pricing, just the window your wall actually needs.

Written by the team at Winslow Windows & Doors, serving Pompano Beach and surrounding Broward County communities with hurricane-impact window and door installation.