Geometric & Shaped Windows

Geometric & Shaped Windows in Pompano Beach, FL | Winslow Windows & Doors

Geometric and shaped windows bring architectural character to a home, and in Pompano Beach they do it under real structural load. These are triangular, hexagonal, octagonal, and curved impact-glass configurations, custom-fabricated to match your exact rough opening. We build them for homeowners who want a focal point-a half-round over a front door, an angled transom in a gable-without sacrificing the wind-zone protection Florida code demands. Winslow Windows & Doors installs these across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. We’ve been setting custom openings in Pompano Beach long enough to know that the margin between a showpiece and a leak is measured in eighths of an inch. Call (904) 893-3309 to talk through your opening.

Call (904) 893-3309

Product Overview - Geometric & Shaped Windows

A geometric window is not a stock item pulled from a warehouse shelf. It is measured, templated, fabricated, and glazed for one specific opening in one specific house. That is what makes it both the most rewarding window on a Pompano Beach elevation and the one most likely to be installed poorly. The shape itself-a true radius top, a 60-degree triangle, a faceted octagon-creates joinery points that rectangular windows never test. Each corner transfers stress differently. Each miter has to be cut and sealed so that the frame, the glass, and the perimeter flashing act as one continuous system under positive and negative wind load.

For Florida construction, the appeal is straightforward: a geometric window lets light into spaces where a standard rectangle does not fit, and it does so while carrying a laminated impact glass package rated for the High-Velocity Hurricane Zone. The frames are aluminum or vinyl, chosen for the exposure and the architecture. Aluminum suits the clean lines of mid-century and contemporary Pompano Beach homes along the Intracoastal. Vinyl suits the more traditional Mediterranean and coastal cottage elevations, where a softer profile and a broader range of color finishes reads better against stucco. Either way, the window is engineered to meet the design pressure of its specific wind zone, not a generic catalog rating.

We configure curved tops as full-radius half-rounds, quarter-rounds, or elliptical arches. We fit triangular units as gable accents, stairwell light, or eyebrow windows over fixed glass. Hexagons and octagons work as transom clusters, bathroom accent glass, or standalone statement windows in a living-room gable. Every one of them is custom-fabricated to your opening. The moment you introduce a non-rectangular shape, you also introduce the need for a fabricator and an installer who understand how that shape behaves in a hurricane event. That is the product we are describing here: architectural detail without sacrificing wind-zone protection.

Technical Specifications

The spec sheet for a geometric window is shorter than for a standard double-hung, because almost everything depends on the opening you are working with. Here is what you are choosing from:

• Frame materials: Aluminum or vinyl, selected for the exposure and the weight of the glass package.
• Maximum size: Custom fabricated to order. There is no stock maximum; the opening dictates the engineering.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, and clear glass.
• Finish options: White, almond, bronze, black, and tan.
• Design pressure: Matched to your wind zone, up to +/-100. Never higher, never guessed at.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to FBC HVHZ requirements.
• Installation practice: AAMA 2400/2410 standards, with AAMA 812 low-expansion foam perimeter sealant at every rough opening.

What you will notice about that list is what is absent. No generic marketing numbers. A geometric window cannot be sold by a single wind rating because the shape itself changes the load path. That is why the design pressure gets calculated per opening, and why the NOA or Florida Product Approval number is issued per configuration, verified on your quote before fabrication begins.

Call (904) 893-3309 and we will pull the exact compliance documentation for your shape and exposure.

Hurricane & Compliance Performance

Here is what actually matters when a shaped window gets hit by storm-driven debris in Pompano Beach:

Laminated Impact Glass
The laminated impact glass carries a PVB (polyvinyl butyral) interlayer that holds the glass in the frame under impact. The outer lite may crack, but the interlayer keeps the opening sealed against wind and water intrusion. That is the mechanical difference between a window that survives and one that turns into a hole in your envelope.

Miami-Dade NOA / Florida Product Approval
Every configuration we quote carries its own Miami-Dade NOA (Notice of Acceptance) or Florida Product Approval number, issued per configuration. This is not a blanket certification covering the product line. It is documentation tied to your specific shape, size, and framing. We verify it on your quote before any fabrication work begins.

FBC / HVHZ Compliance
The product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That means the geometry, the glass package, and the anchoring system are designed for the wind pressures recorded in the HVHZ region that includes Pompano Beach, not for a national average.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact; TAS 202 covers cyclic wind-pressure loading; TAS 203 covers forced-entry resistance. When we say a window is tested, this is the standard it was tested against.

Design Pressure for Your Wind Zone
Design pressure is a PSF rating, not a wind speed. We match design pressures to your wind zone, up to +/-100, and never higher than the opening actually requires. Over-specifying adds cost without adding protection. Under-specifying fails inspection. We calculate the correct number.

Energy Performance
Low-E and insulated glass options are available for every configuration we fabricate. A south-facing gable window in Pompano Beach takes a lot of sun; a Low-E insulated unit cuts solar heat gain without changing the look of the glass or the color of the frame.

Color & Glass Options

The finish selection matters more on a shaped window than on a standard unit, because the window is often the visual anchor of the elevation. White and almond frames read as traditional Florida coastal-they sit quietly against a light stucco wall and let the glass shape carry the design. Bronze and black frames do the opposite; they outline the geometry and give a contemporary home on the Intracoastal a sharper, more deliberate profile. Tan works well on the Mediterranean-influenced elevations common in Pompano Beach neighborhoods like Cypress Point and Garden Isles, where the stucco carries a warmer pigment and a pure-white frame would look stark by comparison.

Glass selection follows the room, not just the view. Clear laminated impact glass is the default for maximum light transmission and the cleanest sightline. Tinted glass reduces glare and solar gain, which matters on a west-facing octagon that catches the 4 p.m. sun in summer. Low-E insulated glass combines the impact layer with a thermal break-a good fit for a half-round over a front door that faces the afternoon heat but still needs to read as clear from the street. Every option we quote keeps the laminated impact layer as the base. The energy or aesthetic choice happens above that line, never instead of it.

Installation by Winslow Windows & Doors in Pompano Beach

Installation is where a geometric window either performs or fails. The NOA rating assumes the window was installed correctly. Put the same unit in an out-of-square rough opening, skip the perimeter seal, or set the frame a quarter-inch out of plumb, and the engineered load path changes. The window becomes the weak point it was designed not to be.

Our process in Pompano Beach starts with a pre-install inspection of the rough opening. Shaped windows do not forgive rough framing errors the way a rectangular flange window will. We measure the opening at three points on every side, check for rack, and verify the structural header is carrying what the engineering package assumed. From there, the frame gets set level, plumb, and square-checked with a laser, not a bubble level-and anchored per the NOA requirements for the specific configuration.

Perimeter sealing follows AAMA 812 practice with low-expansion foam at the rough opening, then an interior and exterior sealant line that moves with the thermal expansion of the frame instead of cracking away from it. The entire installation is done to AAMA 2400/2410 standards. We then run a water test around the perimeter before interior trim goes back on, and we walk the site afterward to make sure the opening drains and the surrounding flashing is intact.

Permitting matters here. Pompano Beach sits in an HVHZ jurisdiction, which means the building department wants to see a product approval number that matches the window that actually shows up on the truck. We understand that process because we work in it every week. The NOA or Florida Product Approval documentation travels with your order, ready for submittal. If you have ever had a permit kicked back because the approval number did not match the window being installed, you know what that paperwork is worth. Call (904) 893-3309 to schedule a measurement.

Frequently Asked Questions - Geometric & Shaped Windows

What wind zone / design pressure is the Geometric & Shaped Windows rated for?
Design pressures are matched to your wind zone, up to +/-100, calculated per configuration. Because the shape changes the load path, there is no single rating that covers the entire product line. We calculate the correct design pressure for your opening, your exposure, and your location in Pompano Beach or the surrounding Broward County HVHZ. Call (904) 893-3309 with your address and we will pull the right number.

What is the lead time?
Expect longer lead times than a stock rectangular window. A geometric unit is custom-fabricated to your opening, and the glazing, the framing, and the compliance paperwork all move in sequence. Depending on the configuration, the glass package, and the manufacturer line, most shaped Impact Series windows run a multi-week fabrication window after we finalize the field measurements and your approval documentation is confirmed. We give you a written delivery range on your quote.

Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes. In Pompano Beach and any HVHZ jurisdiction, the building department will want to see a product approval number that matches the specific window being installed. The NOA or Florida Product Approval number is issued per configuration-your shape, your size, your frame-so we provide the exact documentation for your specific quote. It is not a generic line-item approval. Call (904) 893-3309 and we will walk you through what your permit package needs.

Can I customize the size or configuration?
Yes, and that is the entire point of the product. Everything is custom-fabricated to your opening. Radius, triangle, hexagon, octagon, transom cluster, eyebrow-the opening dictates the engineering and the fabrication. We template the opening, confirm the angles and the sightlines with you, and then the window is built to match. If your rough opening is out of square, we address the framing first so the window itself does not get built to a bad opening.

How do I maintain the frame?
Aluminum and vinyl frames both clean with mild soap and water. Rinse the tracks, keep the weep holes clear, and inspect the perimeter sealant once a year for shrinkage or separation. In a coastal climate like Pompano Beach, salt air accelerates sealant wear, so we recommend checking the exterior bead before each hurricane season. If you see cracking or lifting at any seal line, call us to re-seal the perimeter before water finds a path in.

Get a Quote - Geometric & Shaped Windows in Pompano Beach

A shaped window is a custom project from the first measurement to the final permit sign-off. If you have an opening in mind, or just a wall that needs light and character, we will measure it, spec the correct design pressure, and put a written quote in front of you. Call (904) 893-3309 to schedule a free on-site measurement in Pompano Beach.

Written by the team at Winslow Windows & Doors, serving Pompano Beach and Broward County with hurricane-impact window and door installations.