Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterHorizontal Roller Windows in Pompano Beach, FL
Horizontal roller windows slide open side-to-side on a track, making them one of the most practical window styles for Pompano Beach homes where casement cranks corrode and double-hungs collect salt grime in the tilt mechanisms. At Winslow Windows & Doors, we’ve been handling window installation and replacement of horizontal rollers across Pompano Beach since 2011 – impact-rated units that meet Broward County’s strict wind-load codes and hold up against the kind of coastal humidity that chews through cheaper hardware in two seasons. Call us at (904) 893-3309 and a real person will pick up, any hour of the day.
If you’re weighing your broader window options, our full Window Installation in Pompano Beach page walks through every style we carry and what each one makes sense for – but if a horizontal roller is already on your list, read on. Ed Winslow handles every project personally, and his name is on every job we do.
What Makes Horizontal Rollers the Right Call in Pompano Beach
Pompano Beach sits right on the Atlantic, and that geography has a way of separating windows that look good in a showroom from ones that actually hold up. Horizontal roller windows have a simpler mechanical path than tilt-in single & double hung windows or crank-operated casements: one sash glides laterally while the other stays fixed. Fewer moving parts means fewer failure points – and in a salt-air environment, that matters more than most people realize.
We install impact-rated horizontal rollers from brands like PGT and CGI, both of which engineer specifically for Florida coastal exposure. PGT’s WinGuard line, for instance, uses a multi-chamber frame and laminated glass that satisfies Broward’s large-missile impact requirements without a separate storm shutter. CGI’s Series 100 rollers pair a thermally broken aluminum frame with silicone-glazed glass – a detail that matters when afternoon sun pushes interior temps toward the point where standard caulk adhesion starts to fail.
Beyond storm performance, horizontal rollers work well in spots where a swinging sash would be a nuisance – over a kitchen counter, above a bathtub deck, alongside a patio where a casement would catch the breeze and become a sail – making them a practical alternative to picture & fixed windows in tight spaces. In the older ranch-style homes in neighborhoods like Collier City and Cresthaven, we see a lot of jalousie window conversions: homeowners who replace those old louvered frames with impact rollers and immediately gain both security and meaningful energy savings.
When You Need Horizontal Roller Windows
- Your current rollers stick, skip, or won’t latch. Worn track seals and corroded rollers are extremely common in homes within a mile of the Intracoastal. Once the hardware degrades to the point where the sash won’t seat flush, the window is no longer air-sealed or impact-rated – even if the glass looks fine.
- You’re replacing jalousies or single-pane sliders. Many Pompano Beach homes built before 1990 still have original jalousie or single-pane aluminum sliding windows that fail current Florida Building Code wind requirements. A modern impact horizontal roller resolves the code issue and cuts cooling load in one step.
- You’re getting a new insurance quote and your carrier is asking about openings. Broward County insurers are increasingly requiring documented opening protection. A permitted horizontal roller installation with a Miami-Dade NOA (Notice of Acceptance) satisfies that requirement and often produces a wind-mitigation credit.
- The frame is visibly corroded, cracked, or pulling from the opening. In Pompano Beach’s humidity, aluminum frames can pit and swell to the point where no amount of lubrication fixes the fit. Frame failure is a structural problem, not a maintenance one – replacement is the only real fix.
- You’re adding a room, converting a garage, or building a Florida room. Horizontal rollers are the default choice for new openings in spaces like these because they maximize glass area without requiring room for a swing arc.
- Your energy bills have been creeping up and the windows face east or west. East-facing rollers in neighborhoods like Cypress Hammocks catch morning sun for hours. Without a low-E coating and a thermally broken frame, that translates directly into runtime on the air handler. New rollers with a proper glass package can make a noticeable difference in a home’s cooling load.
Our Horizontal Roller Window Process
We run the same methodical process whether we’re replacing a single bathroom roller in Collier City or doing a full house of windows in Lighthouse Point. Here’s what working with Winslow looks like from the first call to the final walk-through.
- Measure and assess – in person, before we quote. We don’t quote horizontal rollers from photos or homeowner measurements. Rough opening dimensions, frame condition, sill slope, interior finish depth, and the presence of any existing impact film all affect the right product choice and the final price. Ed or one of our uniformed, background-checked technicians comes to you, takes real measurements, and notes anything that will affect the install – at no trip charge inside Broward County.
- Product selection and permit filing. We help you choose the right unit – frame color, glass package, screen option, and hardware finish – then file for the Broward County building permit. Horizontal roller replacements require a permit in Pompano Beach; any contractor who tells you otherwise is setting you up for a failed inspection and potential insurance complications. We handle the filing; you don’t have to navigate the portal.
- Factory order and scheduling. Impact-rated rollers from PGT and CGI are built to your rough opening size – these aren’t off-the-shelf units. Lead times vary, but we’ll give you a firm delivery window when we place the order and lock in your install date as soon as the product is confirmed.
- Installation day. Our crew removes the existing window, inspects the rough opening for water intrusion or rot, installs the new unit per the manufacturer’s approved installation drawing, and seals the perimeter with a backer rod and low-modulus silicone appropriate for aluminum-to-masonry contact. Interior trim and drywall touch-up are included in the scope if disturbed during removal.
- Inspection and sign-off. We schedule and coordinate the Broward County inspection. The inspector verifies that the unit’s NOA matches the permit, that anchorage meets the spacing on the approved drawing, and that the installation is complete. We don’t hand you a final invoice until the inspection closes out.
- Walk-through and the 36500-Day Done Right Promise. Once the inspector signs off, we walk the job with you, demonstrate the sash operation and lock function, and hand over all manufacturer documentation. If anything isn’t right – now or well into the future – you call us and we come back. That’s the 36500-Day Done Right Promise: if it’s not done right, we make it right, period.
Horizontal Roller Windows Pricing in Pompano Beach
Horizontal roller window costs in Pompano Beach typically run between $450 and $1,100 per window installed, including the impact-rated unit, hardware, permit, and labor. That range is wide because several variables move the number significantly.
| Cost Factor | Typical Range |
|---|---|
| Standard single-sash horizontal roller (impact, aluminum frame, up to 36″ wide) | $450 – $650 installed |
| Larger unit (36″ – 72″ wide, common in living rooms and Florida rooms) | $650 – $900 installed |
| Premium glass package (low-E, argon fill, high SHGC control) | Add $80 – $150 per unit |
| Rough opening repair (rot, water damage, out-of-square frame) | $120 – $400 depending on extent |
| Permit (Broward County) | $75 – $175 depending on project scope |
| Multi-window projects (3+ units, same mobilization) | Typically 8-12% less per unit |
A few things that affect where your project falls in that range: window width is the biggest driver, since impact glass is priced by square foot and larger units require heavier frame members and more anchorage hardware. Frame material matters too – thermally broken aluminum costs more than standard aluminum but performs meaningfully better in Pompano Beach’s climate. And the condition of your existing rough openings can add cost if we find water damage or a sill that needs rebuilding before the new unit can go in.
If you’ve already gotten a written estimate from another contractor, bring it to us – our free second opinion is a standing offer, no strings attached. Seniors and veterans get 10% off every project, always. And if your job comes to more than $200 in repair work, take $40 off. These aren’t promotions; they’re the way we price every job.
For an accurate number on your specific Pompano Beach home, the only way to get it right is an in-person measurement with our window installation near me in Pompano Beach, FL team. Call (904) 893-3309 and we’ll set one up – free, no trip charge inside Broward County, and no pressure to buy on the spot.
Key Takeaways
- Horizontal roller windows are a strong choice for Pompano Beach homes: simpler mechanics, excellent coastal durability, and wide glass area without a swing arc.
- Impact-rated units from PGT or CGI satisfy Broward County wind-load requirements and support wind-mitigation insurance credits.
- Installed cost typically runs $450 – $1,100 per window depending on size, glass package, and opening condition.
- Every installation requires a Broward County permit. Winslow files and coordinates the inspection – you don’t have to do anything.
- The 36500-Day Done Right Promise means the job is backed by Ed’s name, not just a warranty card.
- Seniors and veterans receive 10% off every project. Free second opinions on any written estimate.
FAQs – Horizontal Roller Windows in Pompano Beach
How much do horizontal roller windows cost in Pompano Beach?
Horizontal roller windows in Pompano Beach typically cost between $450 and $1,100 per window, fully installed with permit. The biggest factors are window width, glass package, and the condition of your existing rough openings. Larger living-room or Florida-room units with a premium low-E glass package sit at the higher end; a standard bathroom or bedroom unit in good condition lands closer to the lower end. Call (904) 893-3309 for a free in-person estimate – we measure before we quote.
Do horizontal roller windows meet Broward County’s impact requirements?
Yes, when they’re the right product installed correctly. Impact-rated horizontal rollers from manufacturers like PGT and CGI carry a Miami-Dade or Florida Product Approval Notice of Acceptance (NOA) that satisfies Broward County’s large-missile impact standard. The unit has to be installed to the approved drawing and anchored at the specified spacing for the NOA to be valid – which is exactly why a permitted installation with a county inspection matters. A window that’s impact-rated but improperly installed isn’t legally compliant, and your insurer can deny a claim on that basis.
How long does a horizontal roller window installation take in Pompano Beach?
Most single-window replacements take two to four hours on installation day. A full house of windows typically runs one to two days depending on unit count and any rough opening repairs needed. The longer part of the timeline is usually the product lead time after we place the factory order – impact-rated units are built to size, not pulled from a warehouse shelf. We give you a firm schedule when the product is confirmed and don’t move the install date without a real reason.
Can I replace a jalousie window with a horizontal roller myself?
Technically possible, but not something we’d recommend for an impact-rated replacement in Pompano Beach. The permit, the NOA compliance, and the Broward County inspection exist specifically to verify that the installation meets the structural requirements – and those requirements are enforceable by your insurer and by the county. A DIY install without a permit creates an unpermitted opening that can complicate a home sale, void a wind-mitigation discount, or create a claim dispute after a storm. Beyond the permit question, jalousie-to-roller conversions often involve rough opening modifications that need to be done correctly to avoid water intrusion. Call us at (904) 893-3309 and we’ll walk you through what the job actually involves before you decide anything.
Serving Pompano Beach Neighborhoods and Beyond
We install horizontal roller windows throughout Pompano Beach, including Collier City, Cresthaven, Cypress Hammocks, Palm Aire, Pompano Highlands, and the neighborhoods east of Dixie Highway where salt air is the constant variable in every product decision we make. If you’re in a nearby community and want to explore options, visit our home page to see the full service area. Wherever you are in Broward County, the call goes to the same place: a live person, Ed’s team, and a process that ends with a permitted, inspected installation backed by a promise no national chain can match.
Ready to Get Started?
If your horizontal rollers are sticking, corroded, or simply not rated for the storms that come through Pompano Beach every season, the fix is straightforward. Call (904) 893-3309 – someone answers every call, every hour. We’ll schedule a free in-person measurement, give you upfront pricing with no vague line items, and handle the permit and inspection from start to finish. Ed Winslow’s name is on this business and on every job we take on. That’s the commitment.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pompano Beach.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.