Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterBay & Bow Windows in Pompano Beach, FL
Bay and bow windows are one of the most dramatic upgrades you can make to a Pompano Beach home – they push outward from the wall to create a full shelf of natural light, extra interior space, and a street presence that flat windows simply can’t match. Most installations in Pompano Beach run between $2,800 and $7,500 installed, depending on the window size, impact glazing, and framing work required. Call (904) 893-3309 and a live person will pick up right now to walk you through your options – no voicemail, no callback queue.
At Winslow Windows & Doors, Ed Winslow has been overseeing bay and bow window installations across Pompano Beach since 2011. This isn’t a department of a national chain – Ed’s name is on the business, and he’s accountable for every frame we set and every caulk line we seal. Our team is authorized to install products from PGT and CGI, two of the most trusted names in Florida impact glazing, so your new feature window is built to hold up against the wind loads and hurricane seasons this stretch of coast deals with every year. For the full picture of everything we install, visit our Window Installation in Pompano Beach page.
Pompano Beach’s coastal exposure means any window projecting from your roofline needs to meet Florida Building Code requirements for wind resistance, water intrusion, and impact ratings. We pull the proper permits, use impact-rated glass where required, and back the finished job with our 36500-Day Done Right Promise: if it’s not right, we come back and make it right – period. That’s a standard no national installer can honestly offer.
When You Need Bay & Bow Windows
Not every window installation calls for a bay or bow configuration, but there are specific situations where they’re clearly the right call. Here’s what we see most often in Pompano Beach homes:
- A living room or dining room that feels dark and closed-in. In the older ranch-style homes common along McNab Road and the streets west of Federal Highway, the original single-pane picture windows let in surprisingly little light. A bay projection adds three separate glass faces and brings daylight from multiple angles.
- You want a window seat or interior shelf without a full addition. Bay windows project 16 to 24 inches from the exterior wall, creating a recessed interior ledge that works perfectly as a reading nook, plant shelf, or built-in bench storage – no permits for a room addition required.
- Your existing bay or bow frame is rotting, leaking, or showing impact damage. The flat-roof sections of older Pompano Beach homes – particularly those built in the 1970s and 1980s near the Intracoastal – often have wood-framed bay units that have absorbed decades of salt air and humidity. When the frame is compromised, replacement is safer than repeated repairs.
- You’re replacing single-pane glass that fails Florida’s current wind-load requirements. Homes in Pompano Beach’s coastal high-wind zone need impact-rated or hurricane-rated glazing. A full bay or bow replacement lets us bring the entire unit into code compliance at once rather than patching around an undersized original frame.
- A renovation or addition changed the front elevation. When a Pompano Beach homeowner extends a garage or adds a front porch, the original window placement can look off-center or mismatched. A new bay or bow window rebalances the facade and ties the renovation together visually.
- Energy costs are running high and the old unit has no thermal break. Older aluminum-framed bays conduct heat directly from the Pompano Beach sun into your living space. Modern units with vinyl or fiberglass frames and low-e glass cut solar heat gain measurably – relevant when your air conditioner is fighting a west-facing bay window all afternoon.
Our Bay & Bow Windows Process
We don’t show up and improvise. Every bay and bow installation follows a defined sequence that keeps the job clean, code-compliant, and on schedule.
- On-site measurement and structural assessment. Bay and bow windows are heavier than standard units – they require a properly sized header above the rough opening and, in many cases, a knee wall or cable support system below. Before we quote a single number, Ed or one of our senior installers visits the home, measures the opening, assesses the existing framing, and identifies any structural reinforcement that’s needed. This visit is free, and we give you upfront pricing before any work is scheduled.
- Permit application with the City of Pompano Beach. Broward County requires permits for window replacements that change the opening size or involve structural modifications – and most bay and bow installations do both. We handle the permit application, submit the required product approval documentation for your chosen PGT or CGI unit, and coordinate the inspection schedule. You don’t have to navigate the building department.
- Custom-order manufacturing lead time. Bay and bow units are almost never pulled from stock. We place your factory order with confirmed measurements so the unit arrives ready to set – no field cutting, no filler strips. Lead times vary by manufacturer and current production schedules; we’ll give you an honest timeline at sign-off, not an optimistic guess.
- Old unit removal and rough opening preparation. We protect your floors and furniture with drop cloths, remove the existing window or framing cleanly, and prep the rough opening – setting the header if needed, treating any water-damaged framing we find, and ensuring the sill is level and plumb before the new unit goes in. If we find rot or damage that wasn’t visible in the original assessment, we stop, document it, and call you before we proceed. No silent upgrades that appear on the final invoice.
- Installation, flashing, and sealing. The new bay or bow unit is set, shimmed, and fastened per the manufacturer’s installation instructions and Florida Building Code. We flash the roof section of the bay with appropriate waterproofing membrane – a step that gets skipped on rushed jobs and leads to the water intrusion complaints we regularly get called in to fix for other installers. Interior and exterior caulking is finished to a clean, paintable line.
- Inspection sign-off and walkthrough. We schedule the city inspection and walk through the completed job with you before we leave. You test the operation, check the sightlines, and confirm the interior finish meets your expectations. If anything doesn’t look right to you, we address it on the spot. The 36500-Day Done Right Promise means we’re not done until you’re satisfied – and we’re still accountable long after the invoice is paid.
Bay & Bow Windows Pricing in Pompano Beach
Bay and bow windows cost more than standard replacements because they’re larger, structurally complex, and often require carpentry work that a flat window swap doesn’t. Here’s an honest breakdown of what Pompano Beach homeowners typically pay:
| Scope | Typical Installed Range |
|---|---|
| Standard vinyl bay window, 3-lite, impact-rated | $2,800 – $4,200 |
| PGT or CGI impact bay window, mid-range configuration | $3,500 – $5,500 |
| Bow window, 4- or 5-lite, impact-rated, standard opening | $4,200 – $6,500 |
| Large bow window with structural header work | $5,500 – $7,500+ |
| Permit and inspection fees (City of Pompano Beach) | $150 – $400 (varies by project valuation) |
Several factors push costs toward the higher end of those ranges in Pompano Beach specifically:
- Impact glazing requirements. Homes in Broward County’s wind-borne debris region – which includes most of Pompano Beach east of I-95 – need impact-rated glass or an approved storm shutter system. Impact glazing adds cost upfront but eliminates the need for shutters and often satisfies insurance requirements.
- Structural header upgrades. Older homes in neighborhoods like Collier City and Cresthaven were built with framing standards that predate modern load requirements. When we widen or raise a rough opening for a bay unit, a new header is almost always needed.
- Roofline integration. The angled roof section of a bay or bow window needs to tie into your home’s existing roofline cleanly. In Pompano Beach’s flat-roof and low-slope construction, this sometimes requires custom flashing work that adds labor time.
- Interior finish work. Seat boards, side casings, and drywall patching around the new unit are sometimes included in a full-service quote and sometimes not. We spell out exactly what’s included in writing before you sign anything.
Estimates are always free. Seniors and veterans receive a permanent 10% discount on any project. If you have a written estimate from another contractor, we’ll give you a free second opinion – no pressure, no obligation. Call (904) 893-3309 and ask for an on-site quote.
FAQs – Bay & Bow Windows in Pompano Beach
What’s the difference between a bay window and a bow window?
Casement windows differ from bay windows, which use three panels set at sharp angles – typically a large center lite flanked by two narrower side lites angled at 30 or 45 degrees – creating a defined, angular projection from the wall. A bow window uses four or five equal-width panels set at gentler, consistent angles to form a smooth curve. Bay windows project further from the wall and create a more pronounced interior shelf; bow windows create a softer, more panoramic look and suit wider wall openings. For most Pompano Beach homes with a single living-room wall we’re working with, a bay is the practical choice. For wider dining-room or sunroom walls, a bow window often fits better. We’ll show you both options side by side at your free on-site estimate – call us at (904) 893-3309.
Do bay and bow windows need to be impact-rated in Pompano Beach?
Yes – virtually all of Pompano Beach falls within Broward County’s High-Velocity Hurricane Zone or Wind-Borne Debris Region, and any new or replacement window installation must meet Florida Building Code wind-load requirements. For bay and bow units, that means impact-rated glass or an approved secondary protection system, unlike garden windows which have different requirements. The PGT and CGI units we install carry Florida Product Approval numbers and meet or exceed the code requirements for this area. We submit the product approval documentation as part of the permit package so the inspection goes smoothly. Don’t let any contractor tell you impact glazing is optional here – it isn’t, and an unpermitted installation can create real problems when you sell or file an insurance claim.
How long does a bay or bow window installation take in Pompano Beach?
The physical installation itself typically takes one to two days for most residential projects – one day for straightforward replacements, two days when structural header work or significant interior carpentry is involved. The longer part of the timeline is the manufacturing lead time after you place your order, which varies by manufacturer and current production load; we’ll give you a realistic estimate at sign-off. City of Pompano Beach permit issuance adds a few days to a couple of weeks depending on current building department volume. From signed contract to final inspection, most of our Pompano Beach bay and bow jobs are completed in four to eight weeks, while horizontal roller windows often finish sooner due to simpler installation. We’ll give you a project-specific timeline in writing before work starts.
Can my existing opening be widened to fit a larger bay or bow window?
It can, and we do it regularly – but it’s structural work that needs to be done correctly. Widening a rough opening means removing part of the existing wall framing and installing a new, properly sized header to carry the load above. In Pompano Beach’s older concrete-block and wood-frame construction, the right header size depends on the span, the load above, and the wall type. We assess this during the free on-site measurement visit and include any necessary structural work in the written quote so there are no surprises. If we find something unexpected inside the wall once we open it up, we stop and talk to you before we proceed – that’s how we’ve operated since 2011, and it’s the reason Ed’s name on the truck still means something in this community. Call (904) 893-3309 to schedule your free estimate.
Key Takeaways
- Bay windows use three angled panels; bow windows use four or five for a curved look – both add light, space, and curb appeal to Pompano Beach homes.
- Most installed costs in Pompano Beach fall between $2,800 and $7,500, depending on size, impact glazing, and structural work.
- Impact-rated glass is required by Florida Building Code for virtually all Pompano Beach locations – this is not optional.
- Winslow Windows & Doors pulls permits, handles city inspections, and backs every installation with the 36500-Day Done Right Promise.
- Ed Winslow has been doing this work in South Florida since 2011 – locally owned, locally accountable, and reachable 24 hours a day at a number where a real person answers.
- Seniors and veterans receive 10% off. Free second opinions on any written estimate. No trip charge inside our home county.
Ready to Add a Bay or Bow Window to Your Pompano Beach Home?
If you’re thinking about a bay or bow window – whether you’re replacing a leaking old unit, updating a dated facade, or just finally adding that reading nook you’ve been planning – the first step is an on-site measurement at no cost to you. We come to the home, look at the wall, assess the structural situation, and give you a written number you can rely on. No vague “it depends” answers until after you’ve signed something.
Ed Winslow built this company on the idea that a homeowner deserves a contractor whose name is actually on the work – not a regional manager two states away. When you call (904) 893-3309, you’ll reach a live person right now, any hour of the day or night. We serve all of Pompano Beach, from the beachside streets east of A1A to the residential neighborhoods west of the Turnpike, and we’ve been doing it since 2011. For the full scope of our installation work, visit our home page and see everything we cover.
Call (904) 893-3309 today. Estimates are free, pricing is upfront, and Ed’s word is behind every window we install.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pompano Beach.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.