Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterInsert Window Replacement in Pompano Beach, FL
Insert window replacement – also called a pocket replacement – drops a new window unit directly into your existing frame without tearing out the surrounding drywall, stucco, or trim. In Pompano Beach, where saltwater air accelerates frame corrosion and afternoon squalls stress every seal, it’s the most cost-efficient way to upgrade failing glass or worn hardware when the structural frame itself is still solid. If you’re weighing your options, our full Window Replacement in Pompano Beach page walks through the complete range of approaches – but for most Pompano Beach homeowners with intact wood or vinyl frames, insert replacement gets the job done faster and cleaner.
At Winslow Windows & Doors, Ed Winslow has been overseeing Window Replacement services including insert replacements across Pompano Beach neighborhoods – from Lighthouse Point borders down through the Hammondville corridor and into the older concrete-block homes near Dixie Highway – since 2011. Call (904) 893-3309 any time, day or night. A real person will pick up.
When You Need Insert Window Replacement
Not every window problem calls for a full tear-out. Insert replacement is the right call when the frame is structurally sound but the window unit inside it has given up. Here’s what that typically looks like in Pompano Beach:
- Fogged or sealed-unit failure. If you’re seeing a milky haze between the panes that won’t wipe off, the insulated glass unit has lost its seal. In our humid Broward County climate, this happens faster than most homeowners expect – especially on east-facing windows that take direct Atlantic air. The frame is usually fine; the glass unit is not.
- Persistent drafts and rising FPL bills. Older single-pane or low-grade double-pane windows are a thermal sieve during Pompano Beach summers. When your air conditioner runs constantly and the windows still feel warm to the touch, insert replacement with a PGT or CGI impact-rated unit can make a measurable difference on your utility statement.
- Hardware failure and operational problems. Cranks that spin free, sashes that won’t lock, balancers that let the window slam – these are unit failures, not frame failures. An insert swap fixes the mechanical problem without touching the wall.
- Non-impact glass in a wind-rated opening. Broward County building codes require impact-rated or protected openings. If you’re updating your home’s hurricane protection in phases, insert replacement is the fastest way to bring a single non-compliant opening up to code without a full renovation.
- Water intrusion at the glass edge. Staining at the interior corner of the sash – not at the rough opening or sill plate – often points to a failed glazing compound or perimeter seal on the unit itself. Insert replacement addresses the source without unnecessary demolition.
- Cosmetic or age-related deterioration. Chalked, pitted, or discolored frames that are structurally sound but look dated are a common issue in Pompano Beach’s older neighborhoods, particularly in homes built in the 1970s and 1980s near Sample Road. A new insert modernizes the appearance while the existing frame stays in place.
Our Insert Window Replacement Process
We don’t hand you off to a subcontractor and hope for the best. Ed Winslow built this business so that every job runs on a clear, predictable sequence – from the first phone call to the final cleanup. Here’s exactly what insert replacement looks like when you hire Winslow Windows & Doors in Pompano Beach:
- Free in-home assessment and upfront quote. We schedule a time that works for you, send a background-checked, uniformed technician, and measure every opening on-site. We check the frame for rot, racking, and level – because inserting a new unit into an out-of-square frame creates problems that show up months later. You get a written, itemized price before anyone touches a tool. No surprise line items on the invoice.
- Product selection and permit coordination. We help you choose the right unit for your opening and your goals – whether that’s a CGI impact unit for storm protection, a PGT vinyl insert for energy efficiency, or a CWS series to match an architectural detail on an older home. We also handle Broward County permit coordination where required. Pompano Beach permit offices have specific documentation requirements for impact-rated products; we’ve submitted enough of these packages to know exactly what they need.
- Interior stop removal and old unit extraction. The existing interior trim or stops come off cleanly so we can remove the old sash and any failed hardware. We bag debris as we go – your living room doesn’t become a job site.
- New unit installation and shimming. The new insert goes in level and plumb, shimmed tight to the existing frame. We apply a continuous bead of high-grade silicone at the perimeter – not a partial application – and check every corner. In Pompano Beach, where afternoon wind-driven rain hits windows at an angle, a complete perimeter seal isn’t optional.
- Trim restoration and operation check. Interior stops go back on, caulk lines are tooled clean, and we cycle the window through every operation – open, tilt, lock, unlock – before we call it done. If something isn’t right, we fix it before we leave.
- Final walkthrough with you. We walk you through what was done, show you how to operate any new hardware, and leave the space cleaner than we found it. Ed’s name is on the door – and on every job we do – so the standard isn’t “good enough.” It’s done right.
Insert Window Replacement Pricing in Pompano Beach
Insert window replacement in Pompano Beach typically runs between $350 and $900 per window, depending on size, glass type, and frame material. That range covers most standard residential openings. Larger custom sizes, specialty shapes near the Intracoastal communities in east Pompano Beach, or units requiring impact-laminated glass will push toward or past the top of that range. Full-frame replacements – where the structural frame itself needs to come out – run higher and are a separate service.
Here’s what drives the number up or down:
- Window size. A standard 3-by-4-foot single-hung insert costs less than a wide picture window or a sliding unit. Pompano Beach homes near Sample Road and McNab Road often have non-standard sizes from original construction that require custom-ordered units.
- Glass package. Basic double-pane insulated glass is at the low end. Impact-laminated glass with a low-E coating – the right choice for Florida’s UV exposure and Broward County’s wind requirements – adds cost but also adds long-term value on your energy bills and insurance premium.
- Frame material and condition. Vinyl frames in good shape need minimal prep. Aluminum frames in older Pompano Beach homes sometimes need an adapter kit to accept a modern insert profile; that adds a modest amount to the job.
- Number of openings. When we’re replacing multiple windows in one visit, mobilization costs spread across the job and per-unit cost comes down.
- Permit fees. Broward County permit fees are set by the county, not by us, and we pass them through at cost with no markup.
| Window Type | Estimated Range (per unit, installed) |
|---|---|
| Standard single-hung insert (basic double-pane) | $350 – $500 |
| Single-hung or slider with impact-laminated glass | $500 – $750 |
| Picture or casement insert, standard size | $550 – $800 |
| Large or custom-size impact insert | $750 – $900+ |
We offer $40 off any repair or replacement job over $200, and seniors and veterans receive a permanent 10% discount – not a promotion, a standing commitment. Estimates are always free. Call (904) 893-3309 and we’ll get a technician out to measure and give you a written number with no obligation.
Why Pompano Beach Homeowners Choose Winslow
There’s no shortage of window contractors in Broward County. What’s harder to find is one where the owner is reachable, the price you’re quoted is the price on the invoice, and the warranty means something fifteen years from now.
Ed Winslow started this company in 2011 as a locally owned, owner-operated business – not a franchise, not a call-center operation, not a lead aggregator that farms your job out to whoever bids lowest. When you call (904) 893-3309, you reach a live person every time – at 8 a.m. or 2 a.m. When a technician shows up at your door, they’re background-checked and in uniform. You know who’s coming before the truck pulls in the driveway.
The 36500-Day Done Right Promise is the clearest way we can say this: if the work isn’t right, we make it right. No fine print about what’s covered. No arguing over whether something falls inside or outside the terms. Ed’s word, backed by a local business with a published address and license number – not a shell company that disappears after the check clears.
We’re an authorized installer for PGT, CGI, and CWS, among others. That authorization matters because it means manufacturer warranty support flows through properly – your paperwork is clean if you ever need to make a claim.
And there’s no trip charge inside Broward County. You’re not paying just to have someone show up.
Insert Window Replacement vs. Full-Frame Replacement: Which One Do You Need?
This is the most common question we get before a job starts, and the honest answer is: it depends on the frame condition.
Insert replacement works when the existing frame is structurally sound, plumb, square, and free of rot or water damage. The new unit slides in, the frame stays, and the surrounding wall stays untouched. That’s faster, cleaner, and less expensive.
Full-frame replacement is the right call when the frame itself has failed – rot in a wood frame, buckling in an aluminum frame, water intrusion at the rough opening, or significant out-of-plumb that can’t be shimmed. In Pompano Beach’s older housing stock – particularly the CBS (concrete block stucco) homes built in the 1960s and 1970s along Federal Highway and the barrier island communities east of the Intracoastal – we see both scenarios regularly. The assessment we do at your home determines which path makes sense. We’ll tell you straight, and we won’t recommend full-frame work if insert replacement will do the job.
For a broader look at all your options, visit our Window Replacement in Pompano Beach page.
Local Considerations for Pompano Beach Insert Replacements
Pompano Beach presents a specific set of conditions that affect how insert window work gets done and what products hold up over time.
The proximity to the Atlantic – especially for properties east of US-1 – means salt-laden air that attacks aluminum and corrodes hardware faster than anywhere inland. We steer those homeowners toward Vinyl Replacement Windows or fiberglass-frame inserts from PGT’s vinyl series or CGI’s Guardian line, both of which are designed and tested for coastal Florida exposure. We’ve seen budget aluminum inserts in Pompano Beach’s beachside neighborhoods oxidize noticeably within three to four years.
Broward County’s High-Velocity Hurricane Zone (HVHZ) designation means impact compliance isn’t optional for permitted work. If you’re replacing a window in a permitted scope, the new unit needs to meet HVHZ standards – full stop. We spec products accordingly and pull the paperwork to back it up.
In neighborhoods like Collier City and the streets west of Powerline Road, we see a high concentration of original jalousie windows that homeowners want to convert. Insert replacement isn’t always the right tool for a jalousie-to-modern conversion because the rough opening geometry is different – sometimes a full-frame replacement is the cleaner path. We’ll tell you which applies to your specific opening when we come out.
Spring and early summer in Pompano Beach bring intense UV exposure combined with high humidity – the worst combination for degraded glazing seals without proper Window Maintenance & Care. If you’ve noticed foggy glass appearing or worsening between April and July, that’s not coincidence. It’s the seasonal stress cycle accelerating a seal failure that was probably already developing.
FAQs – Insert Window Replacement
How long does insert window replacement take in Pompano Beach?
Most insert window replacements in Pompano Beach take two to four hours for a standard-size single-hung or slider, assuming the frame is in good condition and the unit is in stock. A full-home job covering eight to twelve windows typically runs one to two days. Lead time for the window unit itself varies by product – stock sizes in PGT or CGI’s standard series are often available within a week or two, while custom sizes or specialty glass packages can take three to five weeks to arrive. We give you a realistic timeline at the estimate stage so you’re not waiting around with no information. Call (904) 893-3309 for a free estimate and we’ll work out a schedule that fits yours.
Is insert window replacement cheaper than full-frame replacement in Pompano Beach?
Yes, insert window replacement is generally less expensive than full-frame replacement because it doesn’t involve removing and replacing the surrounding structural frame, interior drywall work, or exterior stucco repair. In Pompano Beach, where stucco remediation after a full tear-out can add several hundred dollars per opening, that difference is meaningful. The caveat is that insert replacement only makes financial sense when the existing frame is genuinely sound – putting a new insert into a rotted or badly racked frame creates problems that end up costing more to fix later. We assess the frame condition before recommending either approach. Call (904) 893-3309 for a no-obligation look.
Do I need a permit for insert window replacement in Pompano Beach?
Permit requirements in Pompano Beach depend on what the new unit is and how it differs from the existing window. Replacing like-for-like with the same size and glass type sometimes falls under a simple notification process, but upgrading to impact-rated glass or changing the window type typically triggers a full Broward County building permit, especially given HVHZ requirements. We handle permit coordination as part of the job – you don’t need to navigate the county’s permitting portal yourself. If a permit is required, we pull it, schedule the inspection, and get it closed out. No permits skipped, no liability passed to you. Call (904) 893-3309 for specifics on your opening.
Can insert window replacement improve hurricane protection in my Pompano Beach home?
Yes, provided you’re upgrading to an impact-rated unit. Inserting a CGI or PGT impact window into a sound existing frame brings that opening into Broward County’s HVHZ compliance and provides meaningful protection against wind-borne debris. The laminated glass layer in a true impact unit is what makes the difference – it holds together under impact rather than shattering into the interior. One important note: impact window performance depends on the entire system, including proper installation and the condition of the frame the unit sits in. A correctly installed impact insert in a solid frame performs as rated; the same unit installed sloppily or in a compromised frame may not. That’s why our installation process includes a full frame inspection before we ever order the new unit. Call (904) 893-3309 to talk through your home’s hurricane protection gaps.
Key Takeaways
- Insert window replacement keeps the existing frame in place and works best when the frame is structurally sound – a faster, less invasive option than full-frame replacement.
- In Pompano Beach, coastal salt air, HVHZ permit requirements, and intense UV exposure all affect which products hold up and which don’t.
- Installed cost typically ranges from $350 to $900 per window depending on size, glass type, and frame prep needed.
- Winslow Windows & Doors has been doing this work in Pompano Beach since 2011, with upfront pricing, live 24/7 phone, and the 36500-Day Done Right Promise backing every job.
- Seniors and veterans receive a permanent 10% discount; any repair or replacement over $200 comes with $40 off.
Get a Free Insert Window Replacement Estimate in Pompano Beach
If your windows are fogged, drafty, operationally broken, or just overdue for an upgrade, the fastest way to know exactly what you’re looking at – in time and money – is to have someone come out and look. Winslow Windows & Doors serves Pompano Beach and surrounding Broward County communities, with no trip charge for homes in our service area. Call (904) 893-3309 any time and a real person will answer. We’ll schedule a free in-home assessment, measure your openings, check your frame condition, and put a written price in front of you before any work begins. Upfront pricing. No surprises on the invoice. Ed’s word on that.
We’re the neighbor down the road – the one who’s been here since 2011 and plans to be here long after the job is done.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pompano Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.