Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterCGI Shingle, Tile & Metal Roofing in Pompano Beach: What to Know First
CGI shingle, tile, and metal roofing repair in Pompano Beach typically runs $350 to $1,200 depending on whether we’re replacing fasteners, resealing a penetration, or rebuilding a section after storm damage. Most CGI roof work in Pompano Beach is scheduled within a week, and we quote the job before we touch it, so the price you hear is the price you pay. This page is for homeowners who own a CGI roof and want straight answers about how it fails, what it costs to fix, and who in Pompano Beach actually knows the product line. Call (904) 893-3309 and a live person answers, day or night.
How CGI Products Fail - and How We Fix Them
CGI builds a solid impact-rated roof system, but nothing in South Florida weather is invincible. Here are the failure modes we see most often on CGI roofs in Pompano Beach, and what we do about them.
- Fastener back-out on CGI Standing Seam metal panels. The thermal expansion cycle in Pompano Beach (hot sun, quick downpours, salty air) works panel clips loose over ten or twelve years. You’ll hear a subtle rattle on windy afternoons before you ever see a leak. We re-torque and replace the clip screws with properly rated fasteners, not whatever comes out of the pocket at the hardware store.
- Underlayment breakdown beneath CGI tile profiles. Tile itself rarely fails first, the felt or synthetic underlayment underneath does. In Pompano Beach’s humidity, old felt dries out and splits at the laps. By the time you see a ceiling stain, the underlayment has been compromised for months. We lift the CGI tile, replace the underlayment section, and re-bed the tile so the warranty stays intact.
- Flashing separation at CGI roof-to-wall transitions. This is the number one leak point we trace on CGI shingle roofs, especially on two-story Pompano Beach homes where the sun beats on the west wall all afternoon. The metal flashing expands and contracts against the stucco, the sealant eventually lets go, and water finds the gap. We cut out the old sealant, re-flash with proper gauge metal, and use a marine-grade sealant that handles the salt air here.
- Wind-driven water intrusion at CGI ridge caps. CGI ridge caps are tested to Miami-Dade standards, but after a few hurricane seasons the cap shingle adhesive can lose its grip. We see this on shingle roofs in the Garden Isles and Cresthaven neighborhoods after any sustained blow. The fix is re-securing the cap with the correct adhesive and checking for cracked caps that need replacement before the next storm.
- Corrosion at CGI exposed fasteners on older metal roofs. If your CGI metal roof dates back fifteen years or more and uses exposed fasteners, the neoprene washers are likely degrading. Once the washer fails, water wicks down the screw threads into the decking. We replace the fasteners with updated CGI-compatible components and check the panel profile for any distortion that needs addressing.
Our CGI Shingle, Tile & Metal Roofing Process
- 1
We talk. You call (904) 893-3309, describe what you’re seeing, and we ask the right questions. Is it a one-spot leak or widespread? When did you notice it? What CGI product is on the roof?
- 2
We inspect. A background-checked Winslow technician arrives in uniform, walks the roof, and documents what’s actually happening. No charge to come out inside our home county.
- 3
We decide on parts together. Where warranty or performance matters, we use OEM CGI components. Where a quality aftermarket part does the job just as well for less money, we tell you that plainly and let you choose. No vague “we use the best” talk.
- 4
We do the work. The repair is done right, whether that’s re-flashing a wall transition, re-bedding tile, or replacing a section of shingle. Ed’s name is on the door, and on every job we do.
- 5
We test and verify. We run water where water flows, check the repair from the deck and from the ground, and make sure nothing is left half-done.
- 6
We stand behind it. The 36500-Day Done Right Promise means if it’s not done right, we come back and make it right. Period.
What CGI Shingle, Tile & Metal Roofing Costs in Pompano Beach
| CGI Repair Scenario | Typical Pompano Beach Price Range |
|---|---|
| Flashing repair at roof-to-wall transition | $350 - $650 |
| Underlayment patch beneath lifted CGI tile | $450 - $900 |
| Fastener replacement and re-securing on metal panel | $300 - $700 |
| Ridge cap re-adhesion and cracked cap replacement | $400 - $850 |
| Full shingle section replacement (small area) | $600 - $1,200 |
What moves the price is access, roof pitch, and whether the underlying decking has rot from long-term water intrusion. A steep second-story CGI tile repair in Pompano Beach costs more than a walkable single-story shingle fix. We give you a written line-item quote before work starts, and we honor it. Seniors and veterans get 10% off, always, and any repair over $200 qualifies for $40 off. Call (904) 893-3309 for your free estimate.
Why Pompano Beach Homeowners Call Winslow Windows & Doors for CGI Work
We’ve been serving Pompano Beach and Broward County since 2011, and Ed Winslow owns the company. That means something the national chains can’t offer: when you call, a real person picks up at 2 a.m. or 2 p.m., and the guy whose name is on the truck is the guy who answers for the work. We install PGT, CWS, ES Windows, and ECO Window Systems alongside CGI, so our techs understand impact-rated building science across the whole exterior, not just one product line. We’re an independent CGI service provider, not a manufacturer-authorized shop, which means we give you the honest parts recommendation, not the one that protects a franchise agreement. Background-checked, uniformed technicians show up when we say they will. Upfront pricing, no surprises on the invoice.
FAQs
No, not when the repair is done correctly with compatible materials and proper techniques. As an independent CGI service provider, we follow warranty-safe practices: lifting and re-bedding tile rather than caulking over cracks, using OEM components where the warranty requires them, and documenting the repair with photos. If a future warranty claim is denied because of our work, we make it right under the 36500-Day Done Right Promise. Call (904) 893-3309 with your specific warranty questions.
Most CGI roof repairs in Pompano Beach are scheduled within three to seven days, and a live person answers the phone 24/7 to set that up. If you’re dealing with active water intrusion, tell us that when you call and we’ll prioritize the inspection. There’s no trip charge inside our home county, so you’re not paying just to find out what’s wrong.
Repair makes sense when the roof decking is sound and the failure is localized: a flashing issue, a fastener problem, an underlayment patch. Replacement is the call when you have widespread underlayment degradation, multiple leak points, or decking rot that a patch won’t fix. We’ll tell you which one you actually need, even when the honest answer is that a repair will buy you years. Call (904) 893-3309 for a straight assessment and a free estimate.
We use OEM CGI parts wherever the warranty or performance demands it, and quality aftermarket parts where they perform identically for less money. We show you both options with real prices and let you decide. No silent substitutions and no mystery surcharges. Our name goes on the invoice, so the parts list is transparent.
CGI color batches shift slightly over the years, and Florida sun fade makes an exact match harder on tile roofs. We pull tile from less visible areas like the back slope or a shaded eave to patch the visible front slope, then place the new tile where it’s least noticeable. If you have spare tiles from the original install, we’ll use those first. In Pompano Beach’s climate, even a close color match blends within a season or two as the new tile weathers.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.
Call (904) 893-3309 for your free CGI shingle, tile, or metal roofing estimate in Pompano Beach. Ed’s name is on it, so it has to be right. We’re the one down the road.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.