Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterCGI Sliding Glass & Patio Doors in Pompano Beach: What to Know First
CGI sliding glass and patio doors in Pompano Beach typically need service for three reasons: worn rollers on older Estate and Sentinel series doors, failed weatherstripping that lets salt air work its way into the track, and impact-glass fogging from failed seals. We’re an independent CGI service provider, which means we diagnose and repair these doors without being tied to any manufacturer’s script. Most sliding door repairs take one visit, usually under two hours, and you’ll get a straight quote before any work begins. If you own a CGI sliding door in Pompano Beach and it’s sticking, whistling, or letting water in, call (904) 893-3309 and a real person answers, day or night.
Key Takeaways
- We service CGI Estate, Sentinel, and Targa series sliding glass and patio doors throughout Pompano Beach.
- Common fixes: roller replacement, track realignment, weatherstripping, lock adjustment, and sealed glass unit replacement.
- Most repairs are completed same visit, with written line-item pricing before we start.
- Free second opinions on any written estimate from another company. No trip charge inside our home county.
How CGI Products Fail - and How We Fix Them
CGI builds a stout impact door, but Pompano Beach punishes every brand in specific ways. Here’s what we actually see on CGI sliding glass and patio doors in this area, and what we do about it.
- Roller wear on Estate series sliders. Older CGI Estate doors used steel ball-bearing rollers that were fine in showrooms but corrode fast near the Intracoastal. In neighborhoods like Cypress Cove and Garden Isles, we regularly pull rollers that have seized solid from salt and sand. The fix is stainless steel or nylon replacement rollers that actually survive coastal air, not another set of the originals.
- Track deformation on wider patio door configurations. CGI three-panel and four-panel sliders carry serious glass weight. Over a decade, the track can bow slightly in the middle, which makes the door bind exactly where homeowners lean on it to open. We use a straightedge and shim alignment to correct this, and it’s a repair that falls squarely under our normal sliding door work, no new track required unless it’s cracked.
- Weatherstripping compression on Sentinel series doors. Sentinel doors use a compression-style weatherstrip that flattens over time in Florida humidity. When it fails, you’ll notice air movement around the panel edges and more road noise from Federal Highway. We replace it with a higher-durometer gasket that holds its shape longer than the factory material.
- Lock misalignment after settling. Pompano Beach sits on sandy soil, and foundations move. A CGI sliding door lock that used to engage cleanly can drift out of alignment by an eighth of an inch, which means the door still closes but doesn’t secure properly. This is a common issue on homes in Collier City and Palm Aire where the ground shifts with wet and dry seasons. We realign the lock stile and verify the multi-point lock actually seats all the way.
- Impact glass seal failure on Targa series panels. The Targa line has double-pane impact glass with an insulated air space. When the perimeter seal fails, moisture collects between the panes and you get permanent haze. That’s not a cleaning issue, it’s a glass unit replacement. We order the replacement sealed unit to match your existing frame, then install and test it so the impact rating stays intact.
Our CGI Sliding Glass & Patio Doors Process
Here’s how a CGI service call works with us, from the first phone call to the final walkthrough.
- 1
Call and talk to a person. You reach our team directly, 24/7. We ask what the door is doing, when it started, and whether it’s an Estate, Sentinel, Targa, or something else. That helps us bring the right parts.
- 2
On-site diagnostic. We inspect the door under real operating conditions: full open, full close, locked and unlocked. We check the track, rollers, weatherstripping, lock alignment, and glass seal. You get a written diagnosis and a fixed price before we touch a tool.
- 3
Parts decision. For rollers and weatherstripping, we use materials that outlast the factory parts in Pompano Beach conditions. For glass replacement, we use proper CGI-spec sealed units. We’ll tell you when OEM matters and when a better aftermarket part does the job for less.
- 4
The repair work. We replace, realign, or rebuild what needs it. If the track is salvageable, we don’t sell you a new one. If the glass seal is gone, we don’t try to patch it. Straightforward, either way.
- 5
Testing and guarantee. We run the door through at least a dozen full cycles, check the seal with the door closed, and verify the lock engages fully. Then we walk you through what we did and what to watch for. Every job is covered by the 36500-Day Done Right Promise. If it’s not done right, we make it right.
What CGI Sliding Glass & Patio Doors Costs in Pompano Beach
CGI sliding door work in Pompano Beach runs a wide range because the door models and failure modes vary that much. Here’s what we typically see:
| Service | Typical Range |
|---|---|
| Roller replacement (per panel) | $180 - $340 |
| Track cleaning, alignment, and lubrication | $120 - $220 |
| Weatherstripping replacement (full door) | $200 - $400 |
| Lock realignment or replacement | $150 - $350 |
| Impact glass sealed unit replacement (per panel) | $750 - $1,500 |
| Full slider replacement (CGI-rated, installed) | $2,800 - $6,500 |
What moves the price: door size, number of panels, whether the glass is impact-rated, and whether the frame itself is square or has shifted. We quote a fixed price before work starts, and that’s the price you pay. Call (904) 893-3309 for an exact quote. Estimates are free, and if you have a written estimate from another company, we’ll give you a free second opinion on it.
Why Pompano Beach Homeowners Call Winslow Windows & Doors for CGI Work
Ed Winslow grew up in Miami and learned building construction at Miami Dade College, where he found out fast that a poorly sealed opening in South Florida isn’t a cosmetic problem, it’s a structural one. He’s spent years running installations across Broward County, including jobs in Pompano Beach neighborhoods like Cypress Cove, where homeowners take impact ratings seriously and we take them just as seriously. Winslow Windows & Doors has been locally owned and operated since 2011. Every technician who shows up at your door is background-checked and in uniform. And behind every job is something no national chain offers: the 36500-Day Done Right Promise. If it’s not done right, we make it right. We also service PGT, CWS, ES Windows, and ECO Window Systems, so if you have a mixed-brand house, one call covers it. Ed’s name is on the business, and on every job we do. My name is on it, so it has to be right.
FAQs
Most roller, track, weatherstripping, and lock repairs are completed in a single visit, usually under two hours. Glass unit replacement takes longer because we order the specific sealed unit for your frame. Call (904) 893-3309 and we’ll tell you what’s realistic for your door.
We use OEM parts when the failure is specific to CGI engineering, like certain lock mechanisms and impact-rated sealed glass units. For wear items like rollers and weatherstripping, we often install aftermarket parts that outperform the factory materials in Pompano Beach’s salt air. We’ll explain exactly what we’re putting in and why before any work starts.
No. As an independent CGI service provider, we perform repairs using materials and methods that preserve your existing warranty coverage. Replacing worn rollers or weatherstripping with quality parts does not void anything. For glass replacement, we match the sealed unit spec so the impact rating holds. If you have specific warranty concerns, we’ll walk you through it on site.
The frame and impact glass on a CGI door can last 20 to 30 years or more if the moving parts are maintained. What wears out in Pompano Beach is everything that moves or seals: rollers, weatherstripping, and locks. Those typically need attention every 7 to 12 years in coastal neighborhoods, and more often right along the Intracoastal. Regular track cleaning and roller inspection stretches that interval.
Repair first, unless the frame is cracked, badly out of square from foundation movement, or you want a different style or glass package. A worn roller or flat weatherstrip is a $200 to $400 fix, not a $3,000-plus replacement. We’ll give you an honest answer based on what we see, and we won’t sell a replacement when a repair does the job. Call (904) 893-3309 and we’ll come take a look. The trip charge is on us inside our home county.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.