Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterWhy Pompano Beach Homeowners Choose CWS Windows & Doors
CWS windows and doors are built for South Florida’s building codes, and homeowners in Pompano Beach choose them because the product lines are engineered around Miami-Dade NOA requirements from the start. We provide independent CWS windows and doors repair and service in Pompano Beach, which means we work on your CWS products without being tied to a manufacturer’s warranty department or its pricing schedule. If you own a CWS 4000 Series single hung, a 9000 Series impact slider, or a CWS vinyl patio door in Pompano Beach, Ed Winslow and our crew can diagnose it, source the right parts, and fix it so it holds up to salt air and storm season. We are not affiliated with or authorized by CWS. We’re a local, owner-operated shop that has serviced CWS products across Broward County for over a decade, and we answer our own phone at (904) 893-3309.
Why Trust Winslow Windows & Doors for Your CWS Windows & Doors?
Ed Winslow grew up in Miami and started in the trade at Miami Dade College’s Building Construction Technology program, where he learned early that a poorly sealed window in South Florida weather is a liability, not an eyesore. He’s spent years running installations across Broward County, including jobs in Pompano Beach neighborhoods like Cypress Cove, where homeowners take their impact ratings seriously and Ed takes them just as seriously. That background matters when you’re dealing with CWS products, because the failure modes on a CWS 9000 Series impact window in Pompano Beach are different from what you’d see ten miles inland. Our technicians know CWS frame construction, the glazing systems on the impact lines, and where corrosion tends to start on the hardware. We use OEM CWS components when they’re available. When a part has been discontinued or when the original hardware keeps corroding in salt air, we source marine-grade equivalents that actually outperform what the factory shipped. And because Ed’s name is on the business, every CWS repair gets checked before we call it done. My name is on it, so it has to be right.
Common CWS Windows & Doors Problems We Fix in Pompano Beach
- Salt-driven corrosion seizing roller assemblies on CWS horizontal sliders. This is the single most common CWS failure we see in Pompano Beach, especially within a mile of the Intracoastal or A1A. The original steel roller bearings on CWS slider tracks oxidize in sustained salt air, the track gets pitted, and the sash eventually won’t move without real force. We replace the rollers with marine-grade stainless steel, clean and re-coat the track, and treat the frame with a corrosion inhibitor.
- Warped or brittle CWS vinyl frames from prolonged UV exposure. East and west-facing CWS vinyl patio doors in Pompano Beach take direct sun for hours every day. Over years, the vinyl can chalk, get brittle, and warp enough to break the weather seal. Depending on the extent, we can sometimes re-align and re-seal the frame. If the frame has actually cracked or lost structural rigidity, we’ll tell you honestly that replacement is the better call.
- Failed glue-down glazing on CWS 9000 Series impact units after repeated storm cycles. Impact glazing is held under specific pressure, and after enough seasons of wind-load cycling, the adhesive bond can start to let go. You’ll see it as slight movement in the glass or a rattling sash during high wind. We re-glaze with materials rated for HVHZ exposure and re-test the unit before we leave the job.
- Fogging and seal failure on CWS insulated glass in east-facing exposures. The combination of morning sun, salt, and temperature swings stresses IGUs on Pompano Beach’s east-facing elevations. When the seal fails, moisture gets between the panes and you get permanent fog. We can replace the IGU without replacing the whole window frame, provided the frame itself is still sound.
- Non-compliant original CWS or similar products discovered during building recertification. Pompano Beach has dozens of 1960s and 1970s condo towers along A1A now going through Florida’s 40-year recertification process. Older CWS units or non-impact products in those buildings often don’t carry current NOA paperwork. We handle building-wide window and door replacement projects on that stretch of coast, including retrofitting openings to accept current impact-rated CWS product lines where the structure allows it.
CWS Parts & Our Repair-vs-Replace Approach
We keep a local stock of CWS rollers, locks, keepers, weatherstripping profiles, and balance hardware for the 4000 Series and 9000 Series lines, which means we can often complete a repair in Pompano Beach on the first visit instead of waiting on a parts shipment. For discontinued CWS hardware or components that keep failing in salt air, we source marine-grade aftermarket parts built for coastal environments. We don’t mark up parts as a profit center, and we’ll show you the line-item cost on your written estimate. Our approach on any CWS unit is repair first when the frame is structurally sound. If water intrusion has already started, if the vinyl frame has warped beyond re-alignment, or if the impact glazing has failed and the sash itself is fatigued, we’ll tell you replacement is the honest option. We’d rather lose a small repair job than sell you a fix that won’t last through the next hurricane season. Call (904) 893-3309 and we’ll give you a straight answer, either way.
Our CWS Service Process - Step by Step
- 1
Diagnosis. We inspect the CWS unit in place, checking frame integrity, track condition, roller or hinge hardware, weatherstripping, and glazing. On impact units, we verify the NOA label and confirm the glass hasn’t lost bond. We’ll tell you what’s actually wrong, in plain English, before any work is approved.
- 2
Repair or replacement. For repairable units, we install OEM CWS parts where they’re suited to the environment, or upgrade to marine-grade hardware on corrosion-prone components. For full replacements, we set the opening properly for Pompano Beach construction, building out masonry openings in CBS homes as needed so the new CWS unit is anchored correctly.
- 3
Testing. We cycle every operable sash, check the locking points, verify smooth travel on sliders, and make sure impact glazing is seated under proper pressure. We also check the seal against water intrusion at the perimeter.
- 4
Warranty. Every CWS repair and installation we do is covered under the 36500-Day Done Right Promise. If it’s not done right, we make it right. That’s a century-long standard we’ve backed since 2011, and it applies to every CWS job in Pompano Beach.
CWS Products We Service & Install in Pompano Beach
We service and install the CWS 4000 Series single hung and horizontal sliders, the CWS 9000 Series Impact line, the CWS Architectural Series for larger custom openings, and CWS Vinyl Patio Doors. That includes hurricane impact windows, horizontal roller and sliding impact windows, and vinyl replacement windows. We keep common hardware and components for these product families in local stock so Pompano Beach customers aren’t waiting on a warehouse in another state. If you’re not sure which CWS series you have, describe the window over the phone and we can usually identify it from the frame profile and hardware style.
We Also Service These Brands
CWS isn’t the only brand our Pompano Beach customers own. We’re authorized installers for PGT, CGI, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, so if your home has a mix of impact products from different manufacturers, one call covers all of it. You don’t need three different contractors for three different window brands.
FAQs - CWS Windows & Doors Service in Pompano Beach
No. We are an independent CWS service provider, not authorized by or affiliated with CWS. That’s intentional: we work for you, not for a manufacturer’s warranty department, and we can recommend the best fix for your home even when that means aftermarket parts or an honest “replace it” call. If your CWS product is still under factory warranty, we’ll help you understand what the warranty covers and how to file correctly.
Yes. A cracked impact lite in a CWS 9000 Series can usually be replaced without pulling the whole frame, as long as the frame is structurally sound and the remaining glazing hasn’t de-laminated. We’ll inspect the unit to confirm the frame and bed are still good, then replace the IGU to HVHZ standards and re-test the sash. Call (904) 893-3309 for an exact quote, and remember we offer a free second opinion on any written estimate you’ve already received.
If you’ve cleaned the track and the CWS slider still drags, the roller bearings themselves are almost always the culprit. In Pompano Beach, salt air corrodes the original steel bearings, and once they start to pit, no amount of track cleaning fixes the problem. We replace them with marine-grade stainless steel rollers and re-coat the track, which solves the root cause rather than masking it.
Sometimes. Chalking is cosmetic and doesn’t require frame work. Warping is structural. If the frame has warped enough to break the weather seal or bind the sash, we’ll assess whether re-alignment and re-sealing can restore function. If the vinyl has gone brittle and cracked, replacement is the only safe option, especially on an impact-rated opening. We’ll tell you which one you’re dealing with before we quote anything.
On CWS 4000 Series single hungs in Pompano Beach, the most common failure is fogging and seal failure on the insulated glass, almost always on east-facing elevations where morning sun and salt air work the IGU seal hardest. The second most common is balance hardware wearing out over time. Both are repairable without replacing the frame if we catch them before water intrusion starts. Call (904) 893-3309 for a diagnosis, and if the repair is over $200, ask about the $40 repair discount.
The cost depends on what’s wrong. A roller replacement on a CWS slider typically runs $150 to $300 per sash in Pompano Beach. A full IGU replacement on a 4000 Series runs $300 to $600 per window depending on size and glass package. A complete CWS impact window replacement on a CBS home, including proper masonry bucking and NOA-compliant anchoring, generally falls between $1,200 and $3,500 per opening. Those are honest ranges, not bait prices. We give written line-item quotes with fixed pricing before any work starts, and once the quote is written, the price doesn’t change. Call (904) 893-3309 to schedule your free estimate.
Book Your CWS Service in Pompano Beach, FL
If you need CWS repair in Pompano Beach, call (904) 893-3309. A live person answers, 24/7, and Ed stands behind every job with the 36500-Day Done Right Promise. Free estimates, no trip charge inside the home county, and $40 off any repair over $200. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pompano Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.