ES Windows Custom & Geometric Windows Nationwide | Winslow Windows & Doors

ES Windows Custom & Geometric Windows in Pompano Beach: What to Know First

ES Windows custom and geometric installations in Pompano Beach typically run $1,800 to $6,500 per opening depending on shape complexity, impact rating, and frame finish, with most jobs completed in 3 to 6 weeks from template to install. We’re an independent ES Windows service provider, not a manufacturer-authorized dealer, which means we call problems like we see them and fix them without leaning on a warranty hotline. If you own an ES Windows product that’s failing, fogged, leaking, or was installed wrong the first time, call (904) 893-3309 and we’ll give you a straight answer about what it takes to make it right.

Call (904) 893-3309

Key Takeaways:

• We install and service ES Windows custom, geometric, arched, and oversized openings across Pompano Beach.
• Free estimates with written line-item pricing. No change orders, no surprise invoices.
• Independent means honest. We tell you when OEM parts matter and when a quality aftermarket equivalent saves you real money.
• Ed Winslow’s name is on the business and on every job we do in Pompano Beach.

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid aluminum product, but geometry puts stress on frames and seals in ways standard rectangles never do. Here’s what we actually see on Pompano Beach job sites.

• Radius corner seal separation on ES Series 3000 and 4000 arched units. Arched windows flex at the crown where the radius meets the straight jamb. After a few Pompano Beach summers with 90-degree heat and salt air, the corner seal lifts and you get a hairline gap that whistles in wind and lets humidity creep into the frame. We re-bed the radius corner with commercial-grade sealant and re-shim the crown so the glass sits true. This is the single most common ES Windows geometric failure we repair.
• Fogging between panes on ES Series 2000 insulated glass. When a geometric unit has an unusual shape, the spacer bar that holds the two panes apart gets fabricated with more joints than a standard rectangle. Each joint is a potential moisture entry point. In Pompano Beach’s humidity, a failed joint shows up as interior fog that won’t wipe off. The fix is a new insulated glass unit cut to the exact template dimensions. We match the original glass package, including Low-E coatings and argon fill, so the replacement performs like the original.
• Frame racking on oversized ES Windows fixed geometric openings. A 10-foot-wide pentagon or trapezoid puts enormous dead load on the frame corners. If the original rough opening wasn’t perfectly square or the header settled even a quarter inch, the aluminum frame twists and the operable sashes bind. We remove the unit, correct the rough opening, and reinstall with proper shimming and anchoring. No amount of silicone fixes a racked frame; the window has to come out and go back in straight.
• Roller and track wear on ES Windows sliding geometric configurations. Radius-bottom sliders and oval track systems are beautiful until the rollers wear unevenly because the weight distribution on a curved track is never uniform. You’ll feel a hitch when the panel moves, or it’ll grind on one end. We replace rollers with matched-load hardware rated for the panel weight, not just whatever generic roller fits the slot. Installing an undersized roller on a heavy curved panel means you’re doing the same job again in two years.
• Weep hole blockage on ES Windows custom trapezoids near the beach. Pompano Beach homes within a few blocks of A1A get salt spray and wind-driven rain. On odd angles, the factory weep system drains poorly because the geometry doesn’t pitch water to the weep holes the way a square frame does. Water pools in the track, then finds its way inside. We clear and, where needed, add supplemental weep channels so the water actually exits. Salt air also corrodes the aluminum if the finish has any scratch, so we inspect the frame integrity on every coastal ES Windows job.

Our ES Windows Custom & Geometric Windows Process

Here’s how a typical ES Windows custom or geometric job runs when you call us in Pompano Beach.

1. 1
   Call and talk to a real person. You reach the office, not a call center. We listen, ask what you’re seeing, and schedule a time to look at the unit.
2. 2
   On-site diagnostic. We inspect the window, the rough opening, the flashing, and the surrounding wall. For geometric units, we check whether the frame is racked, the glass is compromised, or the seal has failed. On our home county jobs, that trip costs you nothing.
3. 3
   Parts decision: OEM vs. quality aftermarket. ES Windows parts are available but some have long lead times and premium pricing. We’ll tell you when OEM glass or hardware is worth the wait and the money, and when a proven aftermarket equivalent does the job without sacrificing fit or performance. You get the call, not us.
4. 4
   The repair or replacement. Our technicians arrive in uniform, background-checked, and identified before the door opens. We template, fabricate, or install what’s needed. Custom and geometric work takes precision, not speed, so we take the time to do it right.
5. 5
   Testing and cleanup. We run water and air checks on the finished unit, cycle the hardware, and clean up the job site so you’d never know we were there except the window works.
6. 6
   The 36500-Day Done Right Promise. If it’s not done right, Ed Winslow makes it right. That’s not a warranty card in a drawer. That’s the standard we’ve operated under since 2011.

What ES Windows Custom & Geometric Windows Costs in Pompano Beach

Honest numbers for Pompano Beach ES Windows work, so you know what to expect before anyone steps foot in your home.

• Seal repair on an arched ES Windows unit: $300 to $700. Labor-heavy, not parts-heavy.
• Insulated glass unit replacement (geometric shape): $800 to $2,200. The price swings on size, shape complexity, and glass coating.
• Full frame replacement with new ES Windows custom geometric unit: $2,400 to $6,500 per opening. Impact-rated models push toward the top of that range.
• Oversized fixed trapezoid or pentagon, impact-rated: $4,000 and up. The glass package and engineering on these is where the money goes.
• Track and roller rebuild on sliding geometric configurations: $250 to $550, depending on panel weight and roller spec.

What moves the price: shape complexity, impact rating, frame finish, and whether the rough opening needs correction. Every job on this page carries a written, line-item estimate before work begins. Call (904) 893-3309 and we’ll price your specific ES Windows unit, not a guess from across town.

Why Pompano Beach Homeowners Call Winslow Windows & Doors for ES Windows Work

We’ve been serving Pompano Beach and the surrounding communities since 2011, and we’re still locally owned and operated by Ed Winslow. That means when a Cypress Cove homeowner needs an ES Windows arch re-sealed or a Harbor Village oversized fixed window rebuilt, they call a company with a published address and a license number, not a faceless national installer. Ed grew up in Miami and trained at Miami Dade College’s Building Construction Technology program, so he knows what South Florida heat and humidity do to a window. We also install PGT, CGI, CWS, and ECO Window Systems, which means we’re not married to one brand when something else fits your home better. If you need a second opinion on a written estimate from another company, we’ll give it to you free. Seniors and veterans get 10% off, permanently. Any repair over $200 gets $40 off. And the 36500-Day Done Right Promise covers every job we touch.

FAQs