ES Windows Window Replacement Nationwide | Winslow Windows & Doors

ES Windows Window Replacement: The Pompano Beach Owner’s Guide

Replacing an ES Windows window in Pompano Beach typically runs between $850 and $2,400 installed, depending on size, impact rating, and whether we’re swapping the sash, the glass, or the full frame. We keep common ES Windows replacement parts on our trucks and install them for homeowners across Pompano Beach every week. Most people call us after a window stops sealing, a lock shears off, or the roller track sounds like gravel every time they slide it open. You don’t need to know the exact part number before you call. You need someone who can identify it on sight and tell you honestly whether it’s worth repairing.

Call (904) 893-3309

Which ES Windows Models This Applies To

ES Windows builds a range of aluminum impact and non-impact lines, and the replacement approach depends on which series you have. The biggest compatibility gotcha we see in Pompano Beach: ES Windows has revised their frame profiles over the years, so a sash from a 2012 series won’t necessarily drop into a 2021 frame even if the glass dimensions match. The label matters. Look for the etched corner marking or the silver sticker on the interior frame track. We match by that marking, plus three measurements: visible glass width, visible glass height, and frame depth. If the sticker’s gone, we can still identify it, but it takes a few extra minutes and sometimes a photo to our parts desk.

On the OEM versus aftermarket question: for impact-rated ES Windows units, we recommend OEM glass and OEM hardware. An aftermarket laminate that doesn’t match the ES Windows interlayer spec can pass a visual check and fail an actual storm test, and in Pompano Beach with wind-borne debris standards, that’s not a gamble worth taking on a window that’s supposed to hold the building envelope closed. For non-impact parts like rollers, locks, and weatherstripping, quality aftermarket equivalents often match or beat OEM at a better price, and we’ll tell you when that’s the case for your specific window.

Since 2011, we’ve installed ES Windows across Broward County, and the one thing we’ve learned is that the right part is rarely the first one you find online. Ed Winslow got his start in Building Construction Technology at Miami Dade College, where the instructors drilled one lesson repeatedly: a window that doesn’t seal in South Florida weather isn’t a window, it’s a slow leak. That’s the standard we bring to every ES Windows replacement we do in Pompano Beach.

Signs Your ES Windows Window Replacement Is Failing

• Condensation between the panes. The seal has failed and the insulating gas has escaped. In Pompano Beach humidity, this shows up as fog you can’t wipe off, and it means the glass unit itself is done.
• Sliding panels that drag or jump the track. The roller assemblies on ES Windows sliding units wear unevenly in coastal air. The track may still look fine while the roller bearings are grinding themselves flat.
• Lock hardware that won’t throw or won’t hold. Salt air corrodes the internal cam mechanisms. The handle still moves, but the locking point doesn’t engage, and on an impact window that’s a security and storm-rating problem.
• Daylight visible around the sash. Worn weatherstripping or a sprung frame gap means the window isn’t sealing. In a Pompano Beach summer, your AC is working against that gap every hour of the day.
• Water staining under the sill after a hard rain. Failed sill flashing or a cracked frame channel lets water ride the wind into the wall cavity. By the time the stain’s visible on the drywall, the leak has been there a while.

Replacement Cost & What’s Included

In Pompano Beach, we price ES Windows window replacement with a parts-and-labor line-item breakdown, never a mystery lump sum. Here’s what we typically see:

• Sash replacement (glass plus frame surround): $850 to $1,400
• Full window replacement, non-impact: $1,200 to $1,800
• Full window replacement, impact-rated ES Windows unit: $1,800 to $2,400
• Hardware-only replacement (locks, rollers, weatherstripping): $180 to $450

The spread comes down to size, whether the unit is impact-rated, and whether the existing frame is sound enough to reuse. We don’t pad the estimate with “miscellaneous” line items. What we quote is what you pay, and the 36500-Day Done Right Promise means if our work isn’t right, we come back and make it right. Upfront pricing, no surprises on the invoice. We also offer a free second opinion on any written estimate you’ve received from another company, and $40 off any repair over $200. Seniors and veterans get 10% off, permanently.

DIY or Call Us?

You can safely check a few things yourself: note the label information if it’s still there, measure the glass, and take a photo of the hardware. That saves time when you call. What we don’t recommend is removing an ES Windows sash or glass unit on your own. Impact-rated units are heavy, the glazing gaskets are specific to the frame profile, and a dropped sash in a tight Pompano Beach window frame creates more problems than it solves. We’ve rebuilt enough DIY removals to say it plainly: the time to experiment with channel balances is not on a second-story window over a tile floor. If the part seems simple but something’s fighting you, stop and call (904) 893-3309. We’ll tell you over the phone whether it’s a quick swap or a full replacement, and we’ll show up with the right part the first time.

FAQs