PGT Window Replacement Nationwide | Winslow Windows & Doors

PGT Window Replacement: The Pompano Beach Owner’s Guide

A failed PGT window in Pompano Beach usually means a fogged or cracked insulated glass unit, a worn roller assembly, or a compromised seal letting salt air and humidity into the frame. We stock and install PGT-compatible replacement parts and full window replacements across Pompano Beach, and most work runs between $240 and $700 per opening depending on the part, glass package, and series. If you’re reading this, you’ve probably noticed condensation between the panes, a sash that won’t roll, or a crank that spins without budging – and you want to know if it’s worth fixing before hurricane season gives it a real test.

Call (904) 893-3309

Which PGT Models This Applies To

We replace parts and full units across PGT’s residential line: the WinGuard and WinGuard Vinyl impact series, the 2200/2300 aluminum impact series, the SpectraGuard and ClassicVue lines, and older PGT units still common in Pompano Beach homes built in the 1990s and early 2000s. The compatibility gotcha most homeowners hit is that PGT changed its interlock geometry and weatherstripping profiles between the 2200 and 2300 series, so a sash from one won’t seal cleanly in the frame of the other. The fastest way to identify what you have is to check the label etched on the corner of the glass – it carries a PGT series code, glass thickness, and a manufacture date we use to match the right replacement. In Palm Aire and Garden Isles, we regularly find older WinGuard units where the laminated glass is still sound but the original weatherstripping has flattened out, letting air and bugs slip past the sash pockets. OEM parts are the default choice for anything involving the impact-rated glass itself, since PGT’s laminating and tolerance standards are what keep water out during a driving storm. For rollers, balances, and crank mechanisms, quality aftermarket equivalents from brands we’ve tested hold up just as well at a lower price, and we’ll tell you when aftermarket is the smarter spend.

Key Takeaways

• We carry PGT-compatible parts on our trucks for same-visit replacement in Pompano Beach
• Series mismatch is the #1 DIY mistake – the 2200 and 2300 interchange looks close but doesn’t seal
• Most PGT window replacements take 45 to 90 minutes per opening once the part is in hand
• We’re an independent PGT installer, not a PGT corporate shop, so we quote parts honestly and install fast

Signs Your PGT Window Replacement Is Failing

• Fog or condensation between the panes. The desiccant in the spacer bar has saturated. Once the sealed unit fogs, it can’t be dried out – the glass package needs replacing to restore clarity and keep the impact rating intact.
• Water staining on the interior sill or wall below the window. This usually points to a failed seal at the frame-to-wall joint or a clogged weep system. In Pompano Beach’s wet season, even small leaks compound fast into drywall damage.
• Sash won’t roll or sticks mid-track. Pompano’s sandy soil finds its way into roller tracks faster than you’d think, and the nylon rollers PGT uses in sliding windows and doors wear flat after years of sliding with grit in the track.
• Crank handle spins without resistance or grinds. The gear teeth inside the crank operator have stripped, or the arm has snapped from being forced. This is a mechanical failure, not a cleaning problem.
• Visible cracks, chips, or a spider-webbing pattern in the glass. Impact-rated PGT glass is laminated so it can crack without shattering, but a compromised lite needs replacement to restore the impact rating and pass code if you sell the home.

Replacement Cost & What’s Included

In Pompano Beach, expect to pay $240 to $380 to replace a standard PGT sealed glass unit, $180 to $320 for a roller and track rebuild on a slider, and $450 to $700 for a full sash replacement including impact-rated glass. The range depends on whether you’re dealing with an older single-glazed SpectraGuard or a modern WinGuard with Low-E and argon fill, plus how much frame condition work is needed once we open the pocket. Every quote we give is a written line-item price – the part number, the labor, the sealant and flashing, and disposal of the old unit. No change orders unless you ask for additional work. The labor is covered by Winslow’s workmanship warranty, and the glass carries the manufacturer’s coverage against seal failure. Ed Winslow reviews every estimate before it goes out, and his name goes on the invoice. If it’s not done right, the 36500-Day Done Right Promise means we come back and make it right – no argument, no charge.

Call (904) 893-3309 to schedule your free replacement estimate before the next storm cycle. We answer live, 24/7.

DIY or Call Us?

What you can safely do: clean the tracks, vacuum out the sill pockets, check for obvious debris blocking the weep holes, and tighten visible screws on the crank arm. What you should not attempt: pulling an impact-rated PGT sash that weighs 80 to 100 pounds without a second set of hands – one slip sends it through the frame or onto a tile floor. Glazing a new sealed unit into an aluminum frame requires precise shim placement and sealant work, and getting the pressure plate wrong voids the water warranty and is a code problem in Pompano Beach. We’re the ones who get called after a well-intentioned Saturday project goes sideways, and the repair is always more expensive after the fact. If you’re in Pompano Beach north of Atlantic or out near the Hillsboro Inlet, one of our background-checked, uniformed techs can be at your door with the parts to do it correctly the first trip.

FAQs