Therma-Tru Custom & Geometric Windows Nationwide | Winslow Windows & Doors

Therma-Tru Custom & Geometric Windows in Pompano Beach: What to Know First

Winslow Windows & Doors is an independent Therma-Tru service provider in Pompano Beach, FL. We install, repair, and replace custom and geometric windows built on Therma-Tru frames, including arched, radius, eyebrow, and oversized configurations. Most custom geometric jobs in Pompano Beach take 3 to 5 weeks from template to trim-out, and pricing is always a written line-item quote before we touch a single fastener. If you own a Therma-Tru window that’s fogged, warped, leaking, or simply no longer closing the way it should, call (904) 893-3309 and we’ll talk through what you’re seeing.

Call (904) 893-3309

Key Takeaways

• We are an independent Therma-Tru service provider for custom and geometric windows in Pompano Beach, not a manufacturer-authorized dealer.
• Geometric and shaped Therma-Tru windows fail differently than rectangular units, particularly at the arch spring line and custom mull joints.
• Warranty-safe repairs matter: we document everything and use parts that protect your remaining Therma-Tru coverage.
• Pompano Beach’s salt air and humidity accelerate seal failure on geometric units faster than inland Florida.
• Every quote is free, written, and line-itemed. Call (904) 893-3309 to schedule yours.

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru makes a solid frame. But custom and geometric windows put stress on components that rectangular windows never see. Here’s what we run into across Pompano Beach, from Cypress Cove to Garden Isles:

• Arch spring-line seal failure on radius and eyebrow units. The curved section of a Therma-Tru geometric window flexes differently than the straight jambs below it. Over years of Pompano Beach sun exposure, the sealant at the spring line, where the arc meets the vertical, pulls away in hairline cracks you won’t spot from the ground. Water gets in, the sash swells, and the window starts sticking. We strip, re-bed, and re-seal using marine-grade sealant rated for the salt air we get here.
• Fogging between panes on custom trapezoid and triangle units. Therma-Tru’s insulated glass units on shaped windows are cut to order, which means the spacer bar has to follow some tight angles. When the spacer fails, argon leaks out and condensation builds inside the glass. You can’t wipe it away. The fix is a new IGU cut to the exact template of your opening, and we work with a local glazier who templates every unit by hand before cutting. No guessing, no digital-only measurements.
• Warped custom mull joints on oversized configurations. When two or more geometric windows get mulled together, Therma-Tru uses a proprietary mull connector. On south-facing exposures in Pompano Beach, the heat load is intense and the connector can soften or warp over a decade. You’ll see a visible seam or feel a draft at the mull. We disassemble the mull, check the framing behind it, and re-install with reinforced connectors that hold up to Florida UV.
• Failed tilt-latch hardware on geometric casements and awnings. Therma-Tru’s shaped casement windows use a specific tilt-latch geometry. Once the latch strips or the pivot shoe wears down, the sash won’t stay open or won’t seat flush. We stock common Therma-Tru hardware profiles and can usually have an oddball radius latch in hand within the week.
• Jamb spread on large picture windows with geometric transoms. When a half-round transom sits atop a wide picture window, the combined weight pushes outward on the side jambs over time. In Pompano Beach homes built during the 1990s and 2000s boom, we regularly see jamb spread of 1/8″ or more, which breaks the weather seal and lets humid air in. We re-square the opening, shim the frame, and reset the unit.

Our Therma-Tru Custom & Geometric Windows Process

You call. A real person answers. Then the job moves like this:

1. 1
   Call and conversation. You describe what the window is doing. We ask targeted questions about where the leak is, when the fogging started, and whether the window is load-bearing in an impact zone. That call takes ten minutes and it’s free.
2. 2
   Site visit and diagnostics. We come to your Pompano Beach home, inspect the window, check the flashing, probe for hidden water intrusion, and measure the actual opening, accounting for any framing that’s drifted.
3. 3
   Parts decision. We recommend OEM Therma-Tru parts when they protect your warranty or when aftermarket won’t hold tolerances on a radius. For some hardware, a quality aftermarket part is actually more durable in salt air. We tell you which is which and why, in plain English.
4. 4
   Written line-item quote. No range, no “we’ll see.” Every screw, every sealant, every labor hour is on paper before you sign.
5. 5
   The work. Our techs arrive uniformed and background-checked. We protect the surrounding trim, remove the old unit or failed component, install the replacement, re-flash the opening, and seal with products made for coastal Florida exposure.
6. 6
   Test and cleanup. We cycle the window through its full range, check for air and water intrusion, and walk you through what we did. The job isn’t done until you’ve seen the work and had your questions answered.

Every Therma-Tru job carries the 36500-Day Done Right Promise. If it’s not done right, we come back and make it right. Ed’s name is on the door - and on every job we do.

What Therma-Tru Custom & Geometric Windows Costs in Pompano Beach

Here’s what we typically see for Therma-Tru custom and geometric work in Pompano Beach:

What moves the price: the radius or angle tolerance (tighter curves cost more to template and cut), whether the window is in an impact-rated zone, access (second floor, scaffolding), and whether the opening needs re-framing due to jamb spread. You’ll get an exact number on your written quote. Call (904) 893-3309 to schedule a free estimate. We’ll come out, look at the window, and hand you a number you can plan around.

Why Pompano Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work

We’ve been at this since 2011, and Ed Winslow runs this company the way he learned it: honest, direct, and allergic to contractor double-talk. When you call Winslow Windows & Doors, a live person answers. Not a voicemail loop, not a call center. At 2 a.m. or 2 p.m., someone picks up. Our techs are background-checked and uniformed, so you know who’s walking up your driveway before they knock. We install eight authorized brands, including Therma-Tru, PGT, CGI, CWS, and ES Windows, which means if a Therma-Tru unit isn’t worth saving, we can show you an alternative that might fit your opening and your budget better. No pressure. Just numbers and facts. The one down the road.

FAQs