Therma-Tru Roof Repair Nationwide | Winslow Windows & Doors

Therma-Tru Roof Repair in Pompano Beach: What to Know First

Therma-Tru roof repair in Pompano Beach typically runs $275 to $650 depending on the failure point, and most jobs are completed in a single visit once we diagnose the issue. As an independent Therma-Tru service provider, we repair the roofing components tied to Therma-Tru entry systems: the door caps, flashing kits, drip edges, and integrated sill pans that keep Pompano Beach rain out of your entryway. If you own a Therma-Tru door and water is getting in around the roofline or the header above it, call (904) 893-3309 and we will send a tech who actually knows the product line.

Call (904) 893-3309

How Therma-Tru Products Fail and How We Fix Them

• Therma-Tru Classic-Craft door caps delaminating at the roof line. The Classic-Craft series uses a fiberglass skin over a wood-grain core, and in Pompano Beach’s salt air and afternoon downpours, the cap seam at the top of the door frame is the first place we see separation. Water rides the roofline, hits the cap, and works into the substrate. We pull the cap, inspect the header for rot, reseal with marine-grade flashing, and reinstall or replace the cap.
• Smooth-Star series with failed drip edge integration. The Smooth-Star line is engineered for low maintenance, but the drip edge above the door is a separate roofing component that roofers often install wrong. We regularly find drip edges nailed flat against the sheathing instead of kicked out over the door trim, which channels roof runoff directly behind the Therma-Tru frame. Our fix: remove the drip edge, install a proper kick-out flashing at the roofline corner, and re-bed the top of the frame.
• Fiber-Classic doors with cracked header flashing after storms. Fiber-Classic holds paint well, but it’s a rigid door. When Pompano Beach gets a tropical storm with 50-plus-mph gusts, the roof flexes while the door does not. The stress point is the flashing above the header. We see tears and lifted corners there on nearly every post-storm inspection. We replace the flashing and add a flexible transition membrane so the roof and door move independently.
• Therma-Tru sliding patio doors with failed top track seal. On raised ranches and split-levels in neighborhoods like Cypress Cove and Garden Isles, the roof overhang is shorter, and the top track of a Therma-Tru sliding door takes direct rain. The factory seal between the track and the rough opening breaks down after five to seven years in South Florida humidity. Water migrates along the track and drips inside the wall. We pull the interior trim, reflash the opening, replace the track seal with butyl tape, and test with a hose before we leave.
• OEM vs. aftermarket parts on warranty-sensitive repairs. If your Therma-Tru product is still under the manufacturer’s warranty, we use OEM parts for anything that touches the door itself (caps, sweeps, threshold caps) so you don’t void the warranty. For the roofing-adjacent components (flashing, drip edge, membrane), we use higher-grade aftermarket materials than the builder-grade originals, because Pompano Beach’s wet-dry cycle demands more than what came with the house.

Our Therma-Tru Roof Repair Process

1. 1
   Call and live answer. You call (904) 893-3309, a person picks up, and we schedule a time. No voicemail loops.
2. 2
   On-site diagnosis. A background-checked, uniformed tech walks the roofline above the Therma-Tru door and tests for water intrusion with a moisture meter before anything is touched.
3. 3
   Parts decision that protects your warranty. We show you where the failure is, whether the fix calls for OEM parts on the door itself or better-than-OEM flashing on the roofing side, and why. You get a written line-item quote before we start.
4. 4
   The repair. We pull the failed component, inspect what is behind it for hidden rot or water damage, make any necessary framing repairs, and reinstall with the right flashing and sealant sequence for coastal Florida.
5. 5
   Water test. We spray the repaired area with a hose for ten minutes while you watch. No drips, no drops, no questions left hanging.
6. 6
   The Done Right Promise. If anything we touched fails, the 36500-Day Done Right Promise means we come back and fix it. Ed Winslow’s name is on the business, so it has to be right.

What Therma-Tru Roof Repair Costs in Pompano Beach

Here is what we charge for common Therma-Tru scenarios in Pompano Beach:

• Drip edge or kick-out flashing replacement above a Therma-Tru door: $275 to $425
• Header flashing repair with minor framing touch-up: $400 to $600
• Full door cap replacement with reseal (Classic-Craft or Fiber-Classic): $350 to $550
• Sliding patio door top track reflash and reseal: $450 to $700
• Hidden rot repair in the header or rough opening: $650 to $1,200 depending on framing extent

What moves the price: how long the leak has been active, whether framing is involved, and whether the door itself needs OEM parts to stay under warranty. Every quote is line-item and fixed. No change orders. Call (904) 893-3309 for a free estimate, and remember the $40-off-any-repair-over-$200 offer stays in effect all year.

Why Pompano Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work

We’ve been in business since 2011, and Ed Winslow grew up in Miami and learned the trade at Miami Dade College’s Building Construction Technology program, where he figured out that a poorly sealed opening in South Florida weather isn’t a cosmetic issue. It’s a liability. When a Therma-Tru door fails at the roof line in Pompano Beach, you need someone who understands how the roofline, the flashing, and the door work as one system. That’s what we do. We are also authorized installers for PGT, CGI, CWS, and ES Windows, so if the roof repair reveals a bigger problem with the entryway, we can quote the full solution without calling a second company. Every tech who arrives at your Pompano Beach home is background-checked, in uniform, and knows the Therma-Tru product line before the truck pulls up.

FAQs