Therma-Tru Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

Therma-Tru Shingle, Tile & Metal Roofing in Pompano Beach: What to Know First

We handle shingle, tile, and metal roofing for Therma-Tru owners across Pompano Beach, and most repair jobs we turn around in one to three days once we’ve diagnosed the issue. As an independent Therma-Tru service provider, we’re not tied to the manufacturer’s pricing or parts pipeline, which keeps costs honest and options open. If you’re a Pompano Beach homeowner with a Therma-Tru roof that’s leaking, lifting, or just looking tired after a few hurricane seasons, this page tells you exactly what we see in the field and what it costs to fix. Call (904) 893-3309 for a free estimate.

Call (904) 893-3309

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru builds a solid product, but in Pompano Beach’s salt air and summer downpours, every brand has its weak spots. These are the five failure modes we run into most often on Therma-Tru roofing jobs in this area.

• Flashing separation at the gable ends. On Therma-Tru’s shingle roofing installations, the metal flashing where the roof meets the gable wall tends to pull away over time. The thermal expansion from Pompano Beach’s hot afternoons followed by sudden storm cooling works the fasteners loose. We see it most on homes in Cypress Cove and Garden Isles. The fix is pulling the old flashing, correcting the underlayment, and re-securing with stainless fasteners rated for coastal exposure.
• Tile cracking along the ridge line. Therma-Tru tile roofing systems use a concrete blend that holds up to wind but can develop hairline cracks right where the ridge tiles meet the field tiles. Once water gets in there, it travels sideways through the batten system before it ever shows up as a ceiling stain. We’ve seen slow leaks in Pompano Beach houses that looked like AC condensation for months before anyone caught the real source. The repair involves pulling the ridge caps, checking the underlayment, and setting new tile with a polymer-modified mortar that flexes instead of snapping.
• Metal roof seam gapping on low-slope sections. Therma-Tru’s standing-seam metal panels are built for northern climates where snow loads push down. On Pompano Beach homes with lower-pitch roof sections, the panels can develop small gaps at the seams from hurricane-pressure uplift cycling. It’s not a manufacturing defect so much as a climate mismatch. We re-engage the seams with proper seam clamps and, where needed, replace the butyl tape sealant with a marine-grade version that holds up to 90 degree heat and salt spray.
• Underlayment rot at penetrations. Therma-Tru roofs are only as good as the underlayment beneath them, and in Pompano Beach the failure we see most often is around pipe boots, vents, and skylight curbs. The issue is accelerated by our afternoon sun breaking down the sealant used on many original installations. By the time you see a stain, the sheathing beneath is already soft. We cut back to solid decking, replace the affected sheathing, and re-install the penetration flashing with a self-adhered underlayment rated for South Florida humidity.
• Rust at fastener heads on metal roofing. Pompano Beach’s coastal salt air is rough on any exposed fastener. On Therma-Tru metal roof installs, we frequently find the neoprene washers on the panel screws have degraded, letting water wick down the fastener shaft. The telltale sign is rust streaks running down the panel from a screw head. The fix is systematic: we remove the failing fasteners, check the metal beneath for corrosion, and replace with 304 stainless screws and oversized washers, then seal the heads.

A note on safety: roof work on tile and metal involves working at height, and no homeowner should be climbing a Therma-Tru roof after a storm without the right fall protection and a trained eye for structural damage. If you suspect a leak or see lifted tiles from the ground, call us. We’ll come look.

Our Therma-Tru Shingle, Tile & Metal Roofing Process

Here’s what a typical Therma-Tru roofing service job looks like when you call us in Pompano Beach.

1. 1
   You call, a person answers. No voicemail tree, no call center. You’ll talk to someone in our office who books the visit and gives you a firm arrival window. No trip charge inside the home county.
2. 2
   We inspect the roof and the attic. Our tech checks the visible roof surface, then goes into the attic if there’s a leak concern. Therma-Tru failure modes often show up on the underside of the decking before they’re visible on top. We also look at the underlayment condition if any tiles or panels are lifted.
3. 3
   We walk you through what we found. You’ll get a plain-English explanation of the problem, photos if you want them, and a written line-item quote. We’ll tell you if an OEM Therma-Tru part is the right call or if a quality aftermarket equivalent makes more sense for your budget and roof age. No pressure, no vague “roof health” reports that amount to a sales pitch.
4. 4
   We do the work. The repair happens on schedule with background-checked, uniformed techs. For shingle work, we match the existing course and exposure. For tile, we take care not to crack surrounding tiles while pulling the damaged ones. For metal, we work panel by panel so the roof stays watertight through the job.
5. 5
   We test before we leave. Every repair gets a water test if it’s a leak fix, and every metal seam gets checked with a gauge. If we replaced shingles or tiles, we confirm the lines are straight and the surrounding material wasn’t disturbed.
6. 6
   The guarantee is attached to the invoice. Our 36500-Day Done Right Promise covers the work. Ed’s name is on it, so it has to be right.

What Therma-Tru Shingle, Tile & Metal Roofing Costs in Pompano Beach

Here are the numbers we quote most often for Therma-Tru roofing work in Pompano Beach. These reflect local labor rates and parts availability, so they’re specific to this market, not a national average.

What moves the price: roof pitch and accessibility, whether the underlayment is shot, and whether we’re matching OEM Therma-Tru components or spec’ing an aftermarket equivalent. Every quote is a fixed number before we start. No change orders hiding in the fine print. Call (904) 893-3309 and we’ll give you a real price.

Why Pompano Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work

We’ve been doing exterior work in this area since 2011, which means we’ve seen how Therma-Tru roofs age through a decade of Pompano Beach summers. Ed Winslow’s name is on the door of the business, and it’s attached to every thermostat check, tile replacement, and seam repair we complete. When you call us at 2 a.m. with water coming through a Therma-Tru roof penetration, a live person answers. The technician who shows up has been background-checked, is wearing a uniform, and works directly under our roof, not as a subcontracted crew. And because we install PGT, CGI, CWS, and ES Windows alongside Therma-Tru products, we understand how roofing ties into the full exterior envelope of your Pompano Beach home. Seniors and veterans get a permanent 10% discount, and any repair over $200 is $40 off. Our 36500-Day Done Right Promise is the only warranty of its kind we know of: if it’s not done right, we fix it. That’s the whole promise.

FAQs