Bay & Bow Windows

Bay & Bow Windows in Pompano Beach, FL | Winslow Windows & Doors

Bay and bow windows change the way a room feels. They push outward past the wall line, grab more daylight, and create a small ledge of usable interior space that a flat window simply can’t. In Pompano Beach, where coastal light and water views are part of why people live here, a projecting window profile makes sense. Winslow Windows & Doors fabricates and installs bay and bow configurations in laminated impact glass across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. We set them level, plumb, and square, and we engineer each opening to the wind zone your home actually sits in. Call (904) 893-3309 to talk about your project.

Call (904) 893-3309

Product Overview - Bay & Bow Windows

A bay window is typically a three-panel projection: a wide fixed center unit with operable flankers, often angled at 30 or 45 degrees. A bow window uses four or more panels set in a gentle arc. Both configurations get their hurricane capability from laminated impact glass, in which a PVB (polyvinyl butyral) interlayer is bonded between two panes. When a windborne object hits the glass, the interlayer holds the broken pieces in the frame rather than letting them blast into your living room. That’s the core of what makes this product suited to Pompano Beach construction.

Architecturally, bay and bow windows fit best in living rooms, dining rooms, breakfast nooks, and primary bedrooms, anywhere you want a wider sightline or a bit more floor area. The projection adds interior square footage without changing the home’s footprint, which matters in Pompano Beach where lot lines are tight and additions are expensive. The projection also creates a shelf: with the seat/shelf sill option, you get a built-in ledge for plants, books, or a cushion. We build these windows in aluminum and vinyl, custom fabricated to the opening, and we match the design pressure to your specific wind zone, never over- or under-engineering the unit.

What we’ve learned from years of installing in Broward County is that the window itself is only half the system. The attachment to the structure, the flashing, the perimeter seal, the anchoring schedule, these details decide whether the unit performs when a storm actually tests it. That’s why we handle the full scope: fabrication specs, permitting submittals, installation, and final water test.

Technical Specifications

Bay and bow windows from Winslow Windows & Doors are built to the opening, not picked from a stock list. Here’s what we work with across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines:

• Frame materials: Aluminum or vinyl. Aluminum gives you thinner sightlines and a clean architectural profile. Vinyl offers a softer look and strong thermal performance. Both are suitable for Pompano Beach’s coastal climate.
• Size range: Custom fabricated to the opening. We field-measure before any fabrication order is placed, so the unit fits the rough opening exactly.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Laminated impact is the hurricane-protection core; Low-E and tinted layers address heat and glare.
• Finish options: White, almond, bronze, black, and tan. These cover most Pompano Beach architectural styles, from white stucco mid-century homes to darker contemporary builds.
• Sill options: Standard sill or seat/shelf sill. The seat/shelf sill turns the projection into usable interior ledge space.
• Design pressure: Matched to your wind zone, up to +/-100. We never specify a higher design pressure than your wind zone requires, and we never undersell it either.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to FBC High-Velocity Hurricane Zone (HVHZ) requirements.

Hurricane & Compliance Performance

This is the part of the page that matters most if you live in Pompano Beach. Bay and bow windows are complex assemblies, more so than a standard single-hung or casement. Each mulled joint, each corner post, each anchoring point has to be engineered correctly or the whole projection becomes a weak point in the building envelope.

Laminated Impact Glass

The PVB interlayer is the active component. When impact occurs, the glass may crack but it stays bonded to the interlayer, which holds the pane in the frame. That keeps wind, water, and debris out of the home, and it also provides strong forced-entry resistance year-round, not just during storms.

Miami-Dade NOA / Florida Product Approval

Each bay and bow configuration carries a Miami-Dade Notice of Acceptance (NOA) and a Florida Product Approval number. These are issued per configuration, which means the exact number for your specific size, glass package, and frame material should be verified on your quote before we submit for permit. We pull the correct submittal for every job.

FBC / HVHZ Compliance

The units are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Pompano Beach sits inside the HVHZ, which is the strictest wind-borne debris region in the state. A window that’s compliant in Orlando is not automatically compliant here. We spec for HVHZ from the start.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. These three tests together simulate what a hurricane actually does to a window: a hit, then hours of pulsing pressure, then an attempted breach. Our bay and bow configurations are documented under this protocol family.

Design Pressure for Your Wind Zone

Design pressure is a PSF (pounds per square foot) rating that tells you how much wind load the window is built to handle. We match it to your wind zone, up to +/-100. We never push a higher rating than the site requires, because that adds cost without adding protection, and we never specify lower. The number comes from the code, not from a guess.

Energy Performance

Low-E and insulated glass options are available for these configurations. In Pompano Beach, afternoon sun on a west-facing window is a real heat load. A Low-E coating reduces solar heat gain while keeping the view clear. Insulated glass adds a thermal barrier that helps the AC work less. Both options combine with laminated impact glass for a package that handles both storm season and the August electric bill.

Color & Glass Options

Finish selection matters more on bay and bow windows than on most other openings, because these units read as architectural features from the curb. White is the safe choice for Pompano Beach’s classic stucco homes, and it’s still the most common finish we install. Almond and tan warm up a Mediterranean or Spanish-style exterior without shouting. Bronze and black work well on modern coastal builds, especially homes with dark roof lines or metal accents. The finish is applied at the factory, so it’s baked on and consistent across every panel in the projection.

On the glass side, the decision usually comes down to what the window faces and how the room is used. Clear laminated impact glass gives you the truest view and the most natural light, which is often the priority for ocean or Intracoastal-facing rooms. Tinted glass cuts glare and adds daytime privacy, and it’s popular on second-story bedrooms that catch hard sun. Low-E insulated glass is the best pick for rooms where heat gain is the main complaint, and it pairs well with either frame material. We’ll walk you through the tradeoffs during your estimate, because the right glass package depends on the window’s orientation, not just its size.

Installation by Winslow Windows & Doors in Pompano Beach

A NOA-rated bay or bow window installed badly is no better than an unrated window. The label covers the product, not the workmanship. The anchoring, the flashing, the seal, and the interior finish all determine whether the unit performs in a storm and whether it leaks in a normal afternoon thunderstorm. That’s why we treat installation as part of the system, not an afterthought.

Our process in Pompano Beach starts with a pre-installation inspection. We check the rough opening, the existing header condition, the wall plane, and the sill elevation before we ever place the fabrication order. When the window arrives, we set it level, plumb, and square, then anchor it according to the manufacturer’s approved schedule for the wind zone. We install per AAMA 2400/2410 practice, and we seal the perimeter with AAMA 812 low-expansion foam, which fills the gap without bowing the frame. After the exterior trim and flashing are complete, we run a water test on the assembly and check every joint for air or water movement. Then we clean up and walk you through the operation and maintenance of the unit.

Pompano Beach sits in a coastal wind zone with HVHZ permitting requirements. If your window change-out includes a structural opening or a mulled assembly, the city or county will want the NOA or Florida Product Approval submittal with the permit package. We handle that paperwork as part of the job. Coastal exposure also means salt air, which is one more reason to get the perimeter seal right the first time. A gap that’s fine in a dry climate becomes a corrosion path in Pompano Beach within eighteen months.

Frequently Asked Questions - Bay & Bow Windows

Get a Quote - Bay & Bow Windows in Pompano Beach

If you’re thinking about a bay or bow window for your Pompano Beach home, the next step is a free on-site measurement. We’ll look at the opening, check the wind zone, talk through glass and finish options, and give you a written line-item quote with the exact NOA or Florida Product Approval number for your configuration. Call (904) 893-3309 to start your project.

Written by the team at Winslow Windows & Doors, serving Pompano Beach, FL.