Casement Windows

Casement Windows in Pompano Beach, FL | Winslow Windows & Doors

Casement windows are the side-hinged, crank-operated workhorses of hurricane-rated openings. Unlike a sliding or single-hung sash that rides on tracks, a casement swings outward on stainless hardware and seals by pressing the full perimeter of the sash into the frame. In Pompano Beach, where wind-driven rain and salt air work on windows constantly, that full compression seal is the detail that keeps water outside where it belongs. We install impact-rated casements across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines for homeowners replacing corroded aluminum frames, upgrading a 1960s ranch, or building new in a coastal wind zone. Call (904) 893-3309 to talk about your openings.

Call (904) 893-3309

Product Overview - Casement Windows

A casement window is simple in the best sense: the sash is hinged at the side and swings outward with a hand crank, so the entire opening can vent. There is no center rail breaking the view, no second sash to work around. When you close it, the sash pulls tight against the frame and the gasket compresses around all four sides. That is why properly built casements consistently outperform sliders in air infiltration testing, and why they are one of the profiles we recommend most often in Pompano Beach and the surrounding Broward corridor.

For hurricane-prone construction, the profile matters. The sash on an impact casement carries laminated glass and locks into a reinforced frame designed for the wind loads your specific zone demands. Because the hardware includes a multi-point lock, not just a single latch, the sash stays pulled into the seal along its full height. We build these windows in aluminum and vinyl, both with proven track records in the Florida market. Aluminum handles high structural loads and resists salt-air corrosion with the right finish. Vinyl brings thermal performance and never needs paint. The right choice depends on the home, the opening size, and the aesthetic of the neighborhood, and we will walk you through that during the estimate.

In Pompano Beach, you see casements on newer coastal builds and on renovated older homes where the crank operation suits a window over a kitchen sink or a wide opening in a living room. They are especially useful anywhere you want the glass to catch a breeze and funnel it inside, since the open sash itself acts as a scoop.

Technical Specifications

Here is how we configure an impact casement for a Pompano Beach home, framed in plain terms:

• Frame materials: Aluminum or vinyl, selected for the opening size and wind zone.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass.
• Finish options: White, Almond, Bronze, Black, or Tan.
• Screen options: Fixed screen or retractable screen.
• Operation: Side-hinged crank operation with multi-point locking hardware.
• Design pressure: Matched to your wind zone, up to +/-100, never higher on this product line.
• Compliance path: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to FBC High-Velocity Hurricane Zone requirements.

Sizing is per-opening. Casements handle taller-than-wide configurations well, which is why you see them flanking picture windows and in stairwells. We verify the maximum unsupported dimensions for each configuration against the approved product documents before we ever order.

Hurricane & Compliance Performance

Impact windows in Pompano Beach are not a luxury upgrade. They are the code-compliant way to protect the envelope, and the paperwork matters as much as the glass. Here is what this product line carries:

Laminated Impact Glass
This product line uses laminated impact glass, meaning two panes bonded with a PVB (polyvinyl butyral) interlayer. Under impact, that interlayer holds the glass in the frame so the envelope stays closed. The glass may crack, but it does not breach. That is the entire point of the system, and it is the difference between a broken window and water blowing through an open hole during a storm in Pompano Beach.

Miami-Dade NOA / Florida Product Approval
Every configuration carries its own Miami-Dade Notice of Acceptance or Florida Product Approval number. These are issued per configuration, not blanket ratings for a brand. We verify the specific approval documents for your exact size and glass package before you sign, and we will provide the numbers your permit application requires.

FBC / HVHZ Compliance
The system is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Pompano Beach sits inside the HVHZ, which is a stricter standard than most of the country. A window that meets HVHZ requirements has passed a testing regime most windows never see.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated impact products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These are the tests that prove a window can take a flying 2×4, then keep resisting wind pressure that oscillates through thousands of cycles without pulling the sash loose.

Design Pressure for Your Wind Zone
Design pressure is a PSF rating, not a wind speed. This product line is matched to your wind zone, rated up to +/-100, and never higher. We do not sell a higher rating than your site needs because it is wasted money. We also never undersell it. Your quote will specify the exact design pressure your opening and zone require, pulled from the approved product documents.

Energy Performance
Low-E and insulated glass options are available on this line. That matters in Pompano Beach, where east-facing glass can take sun from mid-morning through late afternoon. Low-E reduces solar heat gain through the glass itself, and an insulated unit adds a second barrier. You are not choosing between hurricane protection and utility comfort; you get both in one product.

Color & Glass Options

Finish selection is not cosmetic. In Pompano Beach, the wrong color on an aluminum frame can absorb heat, fade under UV, or clash with the specific character of the streetscape. White and Almond are the workhorses here, suiting most coastal and mid-century block homes without calling attention. Bronze and Black read more contemporary and hold up beautifully on newer builds with darker trim or mono-palette exteriors. Tan fits the Mediterranean-influenced homes you see in pockets of Pompano Beach where stucco tones and barrel-tile roofs dominate.

Glass selection works the same way. Clear laminated impact glass gives you the protection with the truest color view, which matters if your window faces the water. Tinted glass knocks down glare in afternoon sun and adds privacy during the day. Low-E insulated glass adds energy performance without changing the look much at all. If you are replacing a window in a bedroom that bakes all afternoon, we will point you toward the insulated package. If the priority is the cleanest possible sightline toward the Intracoastal, clear laminated might be your answer. We will show you samples and talk through the trade-offs at the estimate.

Installation by Winslow Windows & Doors in Pompano Beach

A window is only as good as the rough opening it sits in. We have pulled enough old windows out of Pompano Beach homes to know what hides behind the drywall: rotted bucks, undersized headers, corroded fasteners, and gaps that were never flashed correctly in the first place. The NOA rating on a casement window assumes a proper installation. Put a tested window in a compromised opening and you have compromised the system.

Our installation practice follows AAMA 2400 and 2410 standards, which govern how a window is installed and flashed in residential and light commercial work. We set every unit level, plumb, and square before the first fastener goes in, because a casement cranked out of square will never seat into the compression seal the way it should. We seal the perimeter with AAMA 812 low-expansion foam and finish with flashing and sealant details appropriate for the wall condition. Once the window is in, we water test the opening, clean up, and leave you with the approval documents for your records.

Pompano Beach brings its own installation realities. Coastal exposure means fasteners and hardware spec’d for salt air. Wind zones vary within the city, so we verify your address against the current wind-load maps before we quote. And because Pompano Beach requires permit submittals with product approval numbers, we make sure the paperwork and the installed window match. Improper installation voids the value of a NOA-rated product, and that is exactly why this part of the job is not the place to save money with a handyman and a tube of caulk.

Frequently Asked Questions - Casement Windows

Get a Quote - Casement Windows in Pompano Beach

If you are pricing impact casements in Pompano Beach, start with a real measurement and a written quote. We will spec the exact product line, glass package, finish, and design pressure for your openings, and we will give you a number you can bid against. Call (904) 893-3309 to schedule your free on-site measurement and estimate.

Written by the team at Winslow Windows & Doors, serving Pompano Beach, FL.