Garden Windows

Garden Windows in Pompano Beach, FL | Winslow Windows & Doors

A garden window is the one opening in a Pompano Beach home that works twice as hard. It pushes outward from the wall, wraps glass around three sides, and gives you a built-in shelf that catches morning light for herbs, orchids, or the conch shells your kids dragged home from the beach. But this is Florida, so ours is not the flimsy greenhouse-style bay you might remember from up north. Every garden window we install through Winslow Windows & Doors is built around laminated impact glass on all three panes, engineered to the same High-Velocity Hurricane Zone standards as our full-frame impact windows. We install them level, plumb, and square in Pompano Beach homes, and we have been doing it long enough to know every HOA quirk and permit counter habit in the city. Call (904) 893-3309 and we will measure your opening, check your wind zone, and price your garden window the same week.

Call (904) 893-3309

Product Overview - Garden Windows

Garden windows project outward from the exterior wall, typically 12 to 18 inches, creating a three-dimensional glass box. Glass on the front, glass on both angled sides, and a flat shelf sill at the bottom. In a kitchen, that shelf holds spice plants, ripening tomatoes, or a collection of sea glass. In a bathroom, it holds the things you do not want cluttering the counter. The profile adds usable space without a single square foot of new foundation.

What sets the impact-rated version apart is what you cannot see from the curb. Every pane carries a PVB (polyvinyl butyral) interlayer sandwiched inside the laminate. When debris hits, the glass may crack, but the interlayer holds the fractured pieces in the frame. The window stays sealed. Wind does not enter. Your roof does not pressurize. That is the failure chain these windows exist to break, and it is the same reason Pompano Beach homeowners ask us for garden windows that meet Miami-Dade NOA standards rather than a big-box special order that would never pass a permit review.

We build these in aluminum and vinyl frames, both with full perimeter anchoring into the rough opening. The shelf sill is flat, sloped slightly outward for drainage, and strong enough to hold a small pot collection without sagging. Winslow Windows & Doors installs this window across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so we can match an existing window family or start fresh on a single opening.

Technical Specifications

Here is the short version of what you are buying, with the spec language our quoting team uses so you and your contractor are looking at the same numbers.

• Frame materials: Aluminum or Vinyl, both fully reinforced at the head, sill, and side jambs for the cantilevered load of the projection.
• Glass options: Laminated Impact Glass with PVB interlayer (required for HVHZ compliance), Low-E Insulated Glass, Tinted Glass, or Clear Glass.
• Finish options: White, Almond, Bronze, Black, and Tan. Powder-coated aluminum or UV-stable vinyl depending on frame choice.
• Sill type: Shelf Sill, the only sill option on this product. Flat display surface, slight outward slope for water runoff.
• Design pressure: Matched to your Pompano Beach wind zone, up to +/-100 PSF. Never over-rated, never under-built for your specific street.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers issued per configuration. Exact numbers confirmed on your written quote after we confirm size, frame, and glass package.

The size range depends on rough opening width and structural backing in the wall. Most Pompano Beach kitchens fit a 36-inch to 48-inch wide garden window with a 12- to 18-inch projection. We will confirm what your opening can carry before we quote, not after.

Hurricane & Compliance Performance

This is the section that separates an impact garden window from a decorative garden window. Six features, each one tied to how the product actually performs when Broward County gets hit.

Laminated Impact Glass
The laminated panes use a PVB interlayer that grips fractured glass and holds it in the frame under direct debris impact. The window stays closed, the envelope stays sealed, and wind-driven rain never gets a path inside. This is the physical mechanism behind every impact rating on this page.

Miami-Dade NOA / Florida Product Approval
Each configuration we quote carries its own Notice of Acceptance or Florida Product Approval number. That is the document your Pompano Beach permit reviewer wants to see, and we include the correct one with your submittal package. You will never be asked to hunt it down, and the number on your quote will match the window we install.

FBC / HVHZ Compliance
The window is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the stricter of the two Florida wind regimes, and Pompano Beach sits inside it. A window that meets HVHZ clears the bar anywhere in the city, and the engineering package reflects that from the first calculation.

TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products in this class are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. Together they simulate the debris strike, the pressure cycling that follows, and the integrity of the locked sash after both.

Design Pressure Matched to Your Wind Zone
Design pressure is a PSF rating, not a wind speed. Your garden window gets sized to the pressure your specific Pompano Beach street is mapped for, up to +/-100 PSF, and never higher than the opening actually requires. Over-rating wastes money, and under-rating fails the permit review. We match the number to the map.

Low-E / Insulated Glass Options
Impact glass does not have to be single-pane. We offer Low-E insulated packages that stack an insulating air space and a low-emissivity coating behind the laminate. That means hurricane protection on the outside layer and heat rejection on the inside layer, which matters on an east-facing Pompano Beach kitchen wall that gets hammered by morning sun all summer.

Color & Glass Options

The finish decision tends to follow the house, and Pompano Beach housing stock splits into two main lanes. White and Almond dominate the older concrete-block ranch homes west of Federal Highway. Bronze and Black show up more often on newer construction and the Mediterranean-influenced builds along the Intracoastal corridor. Tan threads the needle when an HOA palette calls for earth tones but white feels too stark. All five finishes are available in powder-coated aluminum, which holds color longer under salt air and UV than a painted frame will.

On the glass side, Clear Laminated Impact Glass is the workhorse. It gives you the full protection without changing the look of the window or the color of the light coming through. Tinted Glass reduces glare and solar heat gain, which makes sense in a west-facing kitchen or any opening without shade. Low-E Insulated Glass is the choice when that garden window also needs to pull double duty as an energy surface, adding an insulating gap behind the laminate. The PVB interlayer is present in every impact configuration regardless of the tint or coating you choose, because compliance starts with the laminate and everything else is added to it.

Installation by Winslow Windows & Doors in Pompano Beach

A garden window carries a cantilevered load. It projects past the wall plane, and every pound of glass, frame, shelf, and potted plant transfers through the fasteners into the rough opening. That is why installation is not a formality, and why the Florida Product Approval on a unit means nothing if the anchoring fails. We install per AAMA 2400/2410 standard practice, use AAMA 812 low-expansion foam around the full perimeter, and set every unit level, plumb, and square before the first anchor is driven.

The process starts with a pre-install inspection of the rough opening. We check the stud layout, the header condition, and the tie-in to the surrounding wall. In Pompano Beach, we also account for coastal exposure, wind zone mapping, and the permit jurisdiction of the specific address. After the window is set and sealed, we run a water test on the sill and head, clean the opening, and leave the site with the flashing and sealant done to the same standard as any full impact window in the house.

Here is the thing about permit submittals in Broward County. The reviewer will ask for the NOA or FL Product Approval that corresponds to the exact configuration you are installing. The frame manufacturer, glass package, size, and design pressure must all line up. We pull that package for our customers, because an improperly documented garden window holds up the entire project, and no Pompano Beach homeowner deserves a three-week delay at the permit desk over a missing sheet.

Frequently Asked Questions - Garden Windows

What wind zone and design pressure is the Garden Window rated for?
The garden window is designed to meet the wind zone and High-Velocity Hurricane Zone pressure requirements assigned to your specific Pompano Beach address, up to +/-100 PSF. We match the design pressure to your property’s mapped wind zone and never over-rate or under-build the unit. Call (904) 893-3309 with your address and we will confirm the exact zone and rating for your opening.

What is the lead time on a garden window in Pompano Beach?
Lead time depends on the frame manufacturer, finish color, and glass package you select. Standard configurations from our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines typically run faster than fully custom sizes, and our quoting team will give you a realistic production window at the time of quote. We would rather give you an accurate date than a fast promise we cannot keep.

Does the garden window require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes. The building department in Pompano Beach will require the NOA or Florida Product Approval document that matches the exact configuration installed at your address. The approval number is issued per configuration, not per product family, so the size, frame, and glass package on your quote must match the document on file. We provide the correct approval documentation with every project submittal.

Can I customize the size or configuration of the garden window?
You can size the window to your opening within the structural limits of the product and your rough framing. You can also choose the frame material, finish color, and glass package independently. What you cannot do is set the design pressure or compliance path below what your Pompano Beach wind zone requires. Customization happens inside the engineering envelope, never outside it.

How do I maintain the garden window frame and shelf?
Clean the frame and glass with mild soap and water, and keep the weep holes at the sill clear so water drains the way the design intends. Do not caulk over the weep holes, and do not set heavy ceramic pots directly on the shelf without a liner that prevents scratching. A quick visual check of the exterior sealant once a year is enough for most Pompano Beach homes, and we can walk you through it at install.

Get a Quote - Garden Windows in Pompano Beach

A garden window is one of the only upgrades that changes how a room feels every single morning, and the impact-rated version buys that feeling with real storm protection baked into every pane. If you are in Pompano Beach and want a written, line-item quote on a garden window for your kitchen or bath, call (904) 893-3309 and we will schedule a free on-site measurement. Start the project now, and you will be setting plants on that shelf before the next hurricane season starts.

Written by the team at Winslow Windows & Doors, serving Pompano Beach, FL and surrounding Broward County communities with hurricane-impact windows and doors.