Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows Across Lighthouse Point
Impact windows in Lighthouse Point are not optional add-ons. They’re the only way to bring most of the city’s 1950s and 1960s ranch homes up to Broward County’s High-Velocity Hurricane Zone code while ending the slow damage that salt air off the canals does to old aluminum frames. We install impact-rated windows and doors throughout Lighthouse Point with the right product approvals, stainless hardware, and marine-grade sealants for this specific environment. Call (904) 893-3309 to schedule a free in-home measure and written quote, and Ed Winslow himself will make sure the numbers are honest before you spend a dime.
Key Takeaways:
- Every permitted replacement in Lighthouse Point must carry a Broward/HVHZ product approval, not just a standard Florida Building Code approval.
- Salt air from the city’s canals corrodes standard aluminum frames and cheap hardware within a decade. We spec stainless and marine-grade materials that last.
- Impact windows for a Lighthouse Point home typically run $800-$1,500 per window installed, with whole-home packages starting around $8,000.
- My Safe Florida Home grants, a sales-tax exemption, and the federal 25C credit can cut your real cost significantly.
- We answer the phone live, 24/7. No voicemail loops, no call centers.
Let’s walk through what this job actually costs here, what fails first near the canals, and what you need approved before the inspector signs off.
Why Winslow Windows & Doors Is Lighthouse Point’s Preferred Impact Windows Company
Lighthouse Point has a building situation that most window installers never learned in trade school. The entire city sits inside Broward County’s High-Velocity Hurricane Zone, the same ultra-strict impact-product jurisdiction as Miami-Dade. Every permitted window or door replacement here must carry a Broward/HVHZ product approval, not just a standard Florida Building Code approval. On top of that, the city’s roughly 50 miles of saltwater canals means homes face near-constant salt-air corrosion on frames and seals even on streets not directly on the water. That creates a replacement cycle that is faster and more code-demanding than in any inland Broward community.
This is the environment we work in every week. We’ve pulled 40-year-old jalousie windows off NE 28th Court whose aluminum frames were so salt-pitted they crumbled at the jamb screws. We’ve seen insulated glass units fog from edge-seal failure within six years of installation because a previous contractor used inland-spec silicone. We know what Lighthouse Point’s inspectors look for because we’ve passed those inspections hundreds of times. Ed Winslow founded this company in 2011 and has kept it owner-operated since day one. When you call, you get a live person. When we quote, the price is fixed in writing. And every job carries our 36500-Day Done Right Promise: if it’s not done right, we come back and make it right.
Our Impact Windows Services in Lighthouse Point
Impact Window Replacement
Most homes in Lighthouse Point were built between the mid-1950s and early 1970s with single-pane aluminum or jalousie windows that were never designed for wind-borne debris. We remove those units and install PGT, CGI, CWS, or ES Windows impact-rated replacements with design pressures matched to the opening. Every job gets stainless steel fasteners and marine-grade sealants, because hardware that rusts inside a decade is a structural failure waiting for the next hurricane.

Impact Window Installation for New Construction and Renovations
If you’re pulling a permit for a kitchen add-on or a new master suite, the window package has to meet current HVHZ standards. We coordinate with your general contractor or directly with the city’s building department so the product approvals, design pressures, and installation photos are ready before the inspection. Jalousie windows that were grandfathered for decades often trigger a full replacement when a renovation permit gets pulled, and we’ve helped many Lighthouse Point homeowners avoid a stalled project by identifying those windows early.

Impact Door and Sliding Glass Door Installation
Impact windows stop the wind and debris at the glass. Impact doors do the same at the largest openings in your home. We install impact-rated entry doors and sliding glass doors from PGT and CGI, with frames and hardware specified for canal-air exposure. A sliding door facing the Intracoastal side of NE 31st Avenue takes a different wind load than one facing a protected interior lot, and we calculate the design pressure for each opening individually.

Impact Window Repair and Hardware Service
Sometimes you don’t need a full replacement. If your existing impact windows have corroded hinges, stiff rollers, compromised seals, or broken balance springs, we repair what’s repairable and tell you straight when replacement is the smarter spend. We carry local parts stock for PGT and CGI lines so Lighthouse Point customers aren’t waiting weeks on a hardware order. Standing offer: $40 off any repair over $200, always, not limited-time bait.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lighthouse Point
We’re an authorized installer for PGT, CGI, and ES Windows, three manufacturers whose product lines carry Broward/HVHZ approvals across a wide range of sizes and design pressures. That matters in Lighthouse Point because the local inspector checks the approval number against the specific opening, not just against the brand name. We match each window and door to the wind zone and floor height of your home, and we specify stainless hardware and marine-grade trim on every project near the canals. Faster turnaround, because we already know which products pass in this city.
Our Impact Windows team handles everything from single-opening replacements to full-home packages, and every install includes the product-approval paperwork your inspector will ask for.
Common Impact Windows Problems We See in Lighthouse Point Homes
- Salt-corroded jalousie frames dropping out of true. The original aluminum frames on 1950s and 1960s jalousie windows corrode through at the sash and jamb from constant canal salt air. They lose their square, bind when opening, and fail under wind load long before the glass breaks. These windows have near-zero wind resistance and flatly fail HVHZ standards.
- Premature insulated glass unit failure. Salt air degrades the silicone edge seal on double-hung insulated glass, especially along the canals off the Intracoastal. Fogging appears first, then the seal fails entirely and the unit loses impact resistance. Inland-spec silicone simply doesn’t last here.
- Rusted non-stainless fasteners on previous impact installs. We’ve seen impact windows installed with standard steel fasteners that rust within eight years along the canals. The glass may still pass HVHZ, but the frame-to-structure connection is compromised. We spec stainless or hot-dip galvanized on every Lighthouse Point job.
- Jalousie windows triggering surprise replacement requirements. Many original jalousie windows were never permitted or were grandfathered. Homeowners pulling a permit for an unrelated renovation discover the replacement is mandatory when the inspector flags them. We identify these windows early so your project doesn’t stall mid-construction.
Pricing for Impact Windows in Lighthouse Point, FL
A typical impact window replacement in Lighthouse Point runs $800-$1,500 per window installed for standard openings. Single-hung impact windows land around $900-$1,800. Large or custom openings, including bay configurations and tall sliding-door panels, run $2,500-$5,000. A whole-home package for a 1950s ranch or split-level usually falls between $8,000 and $25,000 depending on opening count, frame material, and design pressure requirements. Costs here trend toward the higher end of Broward County because the HVHZ product approval rules out the cheapest inland-spec units, and because the salt-air environment demands stainless hardware and marine-grade sealants rather than standard steel. Call (904) 893-3309 for a free in-home measure and a written line-item quote. Fixed pricing, no change orders.
What Impact Windows Costs in Lighthouse Point
The honest price range for impact windows in Lighthouse Point is $800-$1,500 per window installed, with the spread driven by opening size, frame material, glass package, and the design pressure your specific elevation requires. A single-hung window runs $900-$1,800. Large or custom openings, such as picture windows, radius units, or floor-to-ceiling sliders on a canal-facing wall, run $2,500-$5,000. Whole-home packages start around $8,000 and climb from there. What moves the number in Lighthouse Point specifically: the Broward/HVHZ product approval (which eliminates the cheapest non-approved products), the salt-air spec for stainless hardware and marine sealants, the floor height, and how many openings face the water versus the street. A home on NE 26th Avenue with a full canal exposure on the back elevation will calculate differently from a home a block inland. We provide a free in-home measure and written quote with every window priced line-by-line. Call (904) 893-3309 and Ed will review the numbers with you before you sign anything.
The Salt-Air Reality: Why Materials Matter More Than Schedule
Lighthouse Point sits entirely within Broward County’s High-Velocity Hurricane Zone. That’s the same ultra-strict impact-product jurisdiction as Miami-Dade, and it means every permitted window or door replacement must carry a Broward/HVHZ product approval, not just a standard Florida Building Code approval. But the real local challenge is what the canals do to materials over time. The city’s roughly 50 miles of interior canals connected to the Intracoastal Waterway create ambient salt-air conditions across virtually every block. Aluminum frames oxidize faster here. Silicone seals degrade faster. Standard steel fasteners rust faster. On a 1960s ranch along NE 28th Court, our crew pulled the original jalousie windows, louvered glass with aluminum frames so salt-pitted they crumbled at the jamb screws. We replaced them with PGT impact-rated casements, upgrading from zero HVHZ compliance to a large-missile rating and design pressure above 60 psf, using stainless steel fasteners and marine-grade sealants rated for canal-air exposure.
The price gap between coastal-spec and inland-spec is real. A standard inland installation might save $30-$60 per opening on hardware and sealants. Then the silicone fails at year six, the hardware rusts at year eight, and you’re paying for the same job twice before the mortgage is even close to paid off. The cheap spec always costs more within a decade. We don’t install the cheap spec. We install what survives Lighthouse Point, because Ed’s name is on the door and on every job we do.
Impact Windows vs. Hurricane Shutters: The Real Comparison
Hurricane shutters do one thing: they block wind-borne debris when you’re home to put them up. They don’t insulate, they don’t provide permanent protection, they corrode faster on canal-front property, and they require storage space when not in use. Impact windows protect your home 24 hours a day, every day, whether you’re home or not. They also cut outside noise, reduce solar heat gain, and qualify as a permanent wind-mitigation improvement for insurance credits. We don’t sell or install shutters. We install impact windows and doors built to survive Lighthouse Point’s salt air and pass its HVHZ inspections. For most homeowners here, the permanent protection wins on both cost and security over a 20-year span.
Florida Pays You Back
Florida has real incentives for impact windows, and Lighthouse Point homeowners qualify for all of them. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated windows and doors. Florida also exempts impact-resistant windows and doors from sales tax, which shaves a meaningful amount off a whole-home package. The federal 25C energy credit covers 30% of product cost, up to $600 per year on qualifying energy-efficient units. And after a wind-mitigation inspection (typically $75-$150), most Lighthouse Point homeowners see windstorm-premium credits averaging around 25% on the windstorm portion of their policy. We don’t guarantee these numbers, because programs and carriers set the final figures, but the stack is real and we’ll point you to the right resources during your estimate.
We Also Serve Cities Near Lighthouse Point
While this page is focused on Lighthouse Point specifically, our crews also serve Pompano Beach, Fort Lauderdale, Deerfield Beach, and Coconut Creek. The HVHZ requirements and salt-air conditions are similar across the coast here, and the same material specs apply. If you’re right over the municipal line, you’re still within our normal service area and the same live 24/7 phone applies. Call (904) 893-3309 from anywhere in northeast Broward and we’ll get you measured and quoted.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows in Lighthouse Point
Lighthouse Point sits entirely within Broward County’s High-Velocity Hurricane Zone, which uses the same ultra-strict impact-product jurisdiction as Miami-Dade. A standard Florida Building Code approval does not meet the local wind-load and large-missile impact requirements here. Every permitted window or door replacement needs a Broward/HVHZ product approval specific to the opening size, floor height, and design pressure. We pull the correct approval paperwork for every Lighthouse Point job so your inspection passes the first time. Call (904) 893-3309 and we’ll verify your windows before you order anything.
Jalousie windows can stay only if they were legally installed and remain in a permitted configuration. In practice, many Lighthouse Point jalousie windows from the 1950s and 1960s were never originally permitted or were grandfathered, and they offer near-zero wind resistance, flatly failing HVHZ standards. When you pull a permit for an unrelated renovation, the inspector commonly requires replacement of any non-compliant windows on the structure. If you’re planning a remodel, identify the jalousies early so the permit review doesn’t stall. Call (904) 893-3309 for a compliance check on your existing windows.
Impact windows installed with the right spec will hold up for decades in canal air. The failures we see come from inland-spec materials: standard aluminum frames without marine finishing, silicone edge seals not rated for salt exposure, and steel fasteners that rust at the frame-to-structure connection. We specify powder-coated aluminum or vinyl frames, stainless steel or hot-dip galvanized hardware, and marine-grade sealants on every Lighthouse Point install. The glass itself carries the HVHZ impact rating, but the installation detail is what survives the salt. Call (904) 893-3309 and we’ll show you the difference during your free measure.
Florida wind-mitigation insurance credits are based on the whole structure, not just the water-facing elevation. To get the full credit, every glazed opening, including windows, doors, skylights, and garage doors, typically needs to meet the current impact-protection standard. Partial compliance earns a partial credit in most cases, but the windstorm-premium reduction is significantly larger with full compliance. A wind-mitigation inspection after installation documents what your insurer will credit. Call (904) 893-3309 and we’ll help you plan a phased approach if a full replacement isn’t in the budget this year.
Low-E insulated impact glass cuts solar heat gain through the window by roughly 30-50% compared to single-pane clear glass, which translates directly to lower cooling costs in Lighthouse Point’s year-round heat. The greatest savings come on east- and west-facing openings, and homes with original single-pane jalousie windows see the biggest change. Beyond energy savings, Low-E coatings also reduce UV damage to flooring and furniture. The federal 25C credit covers 30% of product cost up to $600 per year on qualifying efficient units. Call (904) 893-3309 for an exact energy model on your home during the free estimate.
Call Winslow Windows & Doors for Impact Windows in Lighthouse Point
Lighthouse Point demands a different spec than inland Broward. If you’re buying impact windows here, you need product approvals that pass HVHZ inspections, materials that survive canal salt air, and a crew that knows what the local inspectors require. We’ve been doing this work since 2011, we answer the phone live 24/7, and every job carries our 36500-Day Done Right Promise. We also offer a free second opinion on any written estimate, no trip charge inside Broward County, and a permanent 10% discount for seniors and veterans. Ed Winslow owns this company and stands behind every window we install. Call (904) 893-3309 today to schedule your free in-home measure and written quote. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Lighthouse Point, FL.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.







Before
After
Before
After
Before
After