Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry doors
CGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Margate
Window installation in Margate runs $800 to $1,500 per impact-rated unit for most standard openings, with whole-home packages landing between $8,000 and $25,000 depending on the scope. If you’re living in a 1970s CBS home or a Century Village condo with original single-pane aluminum windows, you’re not just paying for glass. You’re paying for a Miami-Dade NOA-approved unit, a permit, and an installer who knows the HVHZ rules well enough to keep the job moving the first time. Call (904) 893-3309 and we’ll walk your specific opening sizes before we ever quote a number.
Key Takeaways for Margate Homeowners
- HVHZ rules apply in Margate. Every replacement must carry a Miami-Dade NOA or HVHZ-specific Florida Product Approval, no exceptions.
- Condo boards complicate things. Century Village and most 1970s-era complexes maintain approved window-style and color schedules. Pull that list before you order, or you may pay for the same window twice.
- You’ll likely need custom sizing. Original rough openings in Margate’s older homes are rarely standard. Accurate measurement prevents a 1/2-inch off-square surprise after demo.
- Impact windows do more than protect. In Margate’s UV and humidity, they cut A/C runtime and seal out moisture that rots jambs and grows mold.
- Free estimates are standard practice here. Ed Winslow’s name goes on every line item, and the 36500-Day Done Right Promise means we fix it if it isn’t right.
Why Winslow Windows & Doors Is Margate’s Preferred Window Installation Company
We’ve worked enough Margate jobs to know the difference between a Pompano Beach oceanfront install and a condo retrofit off West Atlantic Boulevard. The wind zone matters, the association matters, and the age of the rough opening matters more than most homeowners expect. Ed Winslow founded this company in 2011, and his name still goes on every quote, every permit application, and every trim detail. That’s the standard we carry into every Margate neighborhood, from the 33063 corridor near Oriole Golf Club to the 55+ streets of Century Village.
Our crews have replaced windows in Margate condos where the board’s approved-product schedule restricted us to a single brand and finish, and in single-family CBS homes where the original 1970s aluminum frames had shifted out of square decades ago. We measure to the actual rough opening, not the glass. We submit for city permits the same week you approve the quote. And we answer the phone around the clock, because a Margate homeowner with a blown-out window at 2 a.m. doesn’t need a voicemail greeting. They need a live voice. That’s what we do.
Our Window Installation Services in Margate
Single & Double Hung Windows
Single hung is the most common replacement we install in Margate’s single-family homes, especially along the 33063 and 33068 zip codes where mid-1970s CBS construction dominates. Original units often have deteriorated jamb liners and fogged glass, but the bigger issue is wind-load rating. A single hung in Margate still needs an HVHZ-approved frame and impact glazing. We install PGT and CWS models sized to your opening, and if the frame’s off-square, we shim and seal it properly rather than forcing a stock size.
Horizontal Roller Windows
Horizontal rollers show up in many mid-century Margate homes and older condo buildings, and they’re a regular retrofit job for us in Century Village. The aluminum frames on those originals corrode at the corners and the wool pile wears out, letting humidity and insects straight into the jamb. We replace them with impact-rated horizontal rollers that meet the condo board’s finish schedule and carry a Florida Product Approval number. The opening can stay the same, but we often rebuild the sill pan while we’re in there.
3-Panel Sliding (3-Lite Roller) Windows
Three-panel sliders give you a wide sightline, and in Margate they’re common on living rooms facing patio areas or lakefront lots near Rock Island Road. The challenge with these units is structural: the center panel creates a wide span that requires a beefier header and careful flashing, especially with 170 mph wind zone requirements. We order each panel’s design pressure to the specific opening, and we never use a rating that exceeds +/-100 psf. Depending on the building, a 3-lite retrofit may also need an association-approved finish before fabrication even begins.
Casement Windows
Casements are our strongest recommendation for Margate homes, and they’re also the window most frequently mandated by local condo boards. The compression seal on a casement outperforms a sliding sash in wind-driven rain, which matters when a summer squall pushes water horizontally across the city. We install PGT casements regularly in Margate because the brand offers wide finish palette flexibility, allowing us to match Century Village’s specific bronze hue or a newer single-family home’s contemporary trim without fighting the board’s schedule. A casement also gives you the best possible air-infiltration rating for the price.
We also handle Window Installation for awning, picture, bay, bow, and garden windows across Margate, each measured and ordered to your exact rough opening and wind zone. No shortcuts on the permit path, no substitution of a non-approved product just to hit a delivery date.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We’re factory-authorized installers for PGT, CGI, and CWS, and we stock common replacement parts and sealants locally for Margate jobs, which keeps the back end of the job moving. ViewLux is another line we install when the project calls for a mid-priced impact frame with a wide finish selection. The important part is what’s behind the brand: we match the product’s Florida Product Approval documentation to the opening and to your association’s schedule. If the board’s approved list allows only one brand, we don’t argue. We order that brand and make sure the finish and design pressure line up with the approval number on file.
Common Window Installation Problems We See in Margate Homes
- Off-square rough openings in 1970s CBS construction. The original aluminum single-hung was installed loose, and once the jamb is pulled you find a 1/2-inch gap at the corner. We measure to the framing, not the old window, and we order custom sizes when needed rather than forcing a standard unit and burying the gap in sealant.
- Skipped condo association approvals. We’ve been called to fix jobs where an installer ordered an NOA window that passed the city but failed the Century Village board’s style schedule. The unit had to come out. We pull the association’s approved-product documents before quoting, so that doesn’t happen on our watch.
- Wrong perimeter sealant for South Florida UV. Standard silicone breaks down in two years under Margate’s sun exposure. We use UV-stable, Low-E-compatible silicone beads and backer rod on every install. It’s a small detail that determines whether your jamb stays dry for a decade.
- Jalousie windows still in service. Plenty of older Margate condos still have jalousies. They’re louvered, they leak air, and they’re essentially a screen. We replace them with impact-rated casements or picture windows, and yes, the rough opening can be adapted if we plan for it before demo.
Pricing for Window Installation in Margate, FL
Expect to pay $800 to $1,500 per impact-rated window in Margate for standard bedroom and living-space openings. An impact single hung typically lands between $900 and $1,800 per unit. Larger custom or architectural openings, including 3-lite sliders and oversized picture windows, run $2,500 to $5,000. If you’re doing a whole-home package, the range is $8,000 to $25,000 or more depending on how many openings, the floor height, and what the condo board or wind zone requires. Frame material, glass package, and finish color all move the number, but the biggest cost driver in Margate is whether your opening needs custom fabrication or structural modification to meet HVHZ requirements. We’ll measure every window, pull the permit for you, and hand you a written line-item quote before any work is scheduled. Call (904) 893-3309 for a free in-home measure and estimate.
What Window Installation Costs in Margate
The number on a Margate window quote gets pushed around by four things: the number of openings, the wind zone requirement tied to your specific address, the floor height of the unit, and whether your association has a mandatory finish list. A ground-level single-family home replacing six windows will land near the bottom of the $8,000 to $12,000 range for PGT or CWS impact units. A third-floor Century Village condo with custom sizing, a specific bronze finish, and a 170 mph wind zone requirement easily moves into the mid-teens. The cheapest fix in the short term is usually the most expensive in Margate: a non-impact unit that fails code, gets caught at inspection, and has to come out. We keep the quote honest on paper before we order anything. Every job gets a free in-home measure and a written proposal. No allowances for a mystery line item later.
How Margate’s HVHZ Rules and Condo Boards Shape Your Window Project
Margate sits inside Broward County’s High Velocity Hurricane Zone, which means every window and our Door Installation in Margate must carry a Miami-Dade Notice of Acceptance or an HVHZ-specific Florida Product Approval number. Nearly all of inland Florida doesn’t operate under that standard. Margate does. But the approval is often the easy part. The harder part, especially in Century Village and the other 1970s-era condo communities that run through the city, is the association’s approved-product schedule. Condo boards in Margate frequently maintain a list of acceptable window brands, styles, and finishes, and they will reject an otherwise-permitted install that doesn’t match it. We’ve seen it happen to other contractors. We don’t let it happen to our customers. We pull the association’s schedule before we quote, order to that list, and then submit the city permit. Doing it in that order saves you from paying for the same window twice.
Our Window Installation in Margate process works the same way whether you’re in a single-family CBS home off State Road 7 or a lakefront condo near Calypso Cove. We document the existing rough opening, check the squareness, match the frame and glass package to the building’s requirements, and then order. The install itself is usually completed in as fast as a single day once your units arrive. Custom fabrication runs four to six weeks, and that lead time is a known factor from the day you sign.
Florida Pays You Back
Margate homeowners have more skin in the game than most of Florida, but the state and federal programs can offset a meaningful chunk of the cost. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, which include impact-resistant windows and doors. Florida’s sales tax exemption covers impact-resistant units from state sales tax at the point of sale. The federal 25C energy credit gives you 30% of the product cost, up to $600 per year, for qualifying Energy-Efficient Windows - Margate units. And after a wind-mitigation inspection, which runs $75 to $150, many homeowners see their windstorm premium drop by about 25% on the windstorm portion of the policy. Those numbers are real, but the final figures come from the program administrator and your insurance carrier. We’ll help you with the paperwork and point you to a licensed wind-mitigation inspector we’ve worked with in Broward County.
One comparison we make with Margate customers is impact windows versus hurricane shutters. Shutters are cheaper up front, but you have to deploy them before every storm, store them when you don’t, and hope they’re in good shape when a hurricane actually tracks toward the coast. Impact windows are permanent protection: the glass and frame are already in place, there’s no panel to find in the garage, and they’re working for you every day of the year. They also qualify for the same insurance mitigation credits as many shutter systems. We don’t install shutters, and we won’t tell you they’re the right choice for every home. For a Margate condo or single-family house that’s getting replacement windows anyway, impact glass is the practical call.
We Also Serve Cities Near Margate
Winslow crews run window installation jobs throughout northern Broward County. Besides Margate, we regularly install in Margate, Coconut Creek, Coral Springs, Pompano Beach, and Deerfield Beach. Same crew standards, same permit process, same 36500-Day Done Right Promise. If you’re a few miles over the city line, we’ll still measure, quote, and install with the same background-checked technicians who work in Margate every week.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Margate
Your condo window replacement in Century Village needs a city permit, and the association does not handle it for you. A licensed contractor must pull the permit with the City of Margate and submit a Florida Product Approval or NOA number that matches your specific unit. We pull the permit on every condo job, and we file the association’s required paperwork at the same time. Call (904) 893-3309 if your board says otherwise, and we’ll walk you through what the city actually requires.
In many Margate homes and condos, yes. A jalousie opening can usually be adapted to a fixed picture window or a casement without enlarging the structural rough opening, but the existing frame must be in sound enough condition to carry the new impact-rated weight. We’ve done this in Century Village units where the opening was square enough to accept a direct replacement. If the framing’s rotted or the concrete lintel has shifted, we’ll rebuild the opening properly and tell you exactly what that costs before we cut anything.
Yes. Impact windows with Low-E glass reduce the solar heat gain that’s driving your A/C through Margate’s hot season, and most customers see a noticeable drop in runtime. We just finished a retrofit in Century Village where we replaced two oversized bedroom windows that had rotted aluminum jambs and failed single-pane sashes, using PGT casements with a bronze finish and 170 mph wind zone rating. After the install, the owner’s A/C runtime dropped enough that she noticed it on her next FPL bill. The specific percentage depends on your exposure, your current glass, and how well your A/C is maintained, but the direction is always the same. Call (904) 893-3309 for a free measure and we’ll show you the numbers for your unit.
You can get the style and color that the board allows, and in Margate that’s the binding constraint. Most boards in Century Village and similar 1970s communities publish an approved-product schedule with specific brands, styles, and finish colors. If PGT is the only brand on the list and the board allows only a bronze finish, that’s what you can install. We’ve handled many Margate jobs where the board’s list narrowed the options to a single casement with a specific design pressure. We order that unit and install it cleanly. Fighting the board gets you a redo at your cost. Working with the list gets you a permit, an approval, and a window that lasts decades.
In Margate’s UV intensity and year-round humidity, degraded vinyl seals, failed perimeter beads, and worn weatherstripping typically show up within 7 to 10 years on original equipment. That’s not a flaw in the window; it’s the environment. For replacement windows, it means you need an installer who uses UV-stable silicone and proper flashing from day one, and you need to budget for eventual re-sealing as normal maintenance. We install every Margate window with the assumption that the sun will test it for a decade. If the seal fails, the 36500-Day Done Right Promise means we come back and make it right.
Get Your Free Margate Window Installation Estimate
If you’re in Margate and you’re ready to replace those 1970s aluminum single-hungs or tired jalousies, start with a free measure and a written quote. We’ll check your association’s approved schedule, verify the NOA numbers, pull the permit, and install your windows with the same care we’d use on Ed’s own house. Call (904) 893-3309 now. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Margate, FL.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.